#!/usr/bin/env bash
###############################################################################
#
# Bash Remediation Script for Unclassified Information in Non-federal Information Systems and Organizations (NIST 800-171)
#
# Profile Description:
# From NIST 800-171, Section 2.2:
# Security requirements for protecting the confidentiality of CUI in non-federal
# information systems and organizations have a well-defined structure that
# consists of:
# (i) a basic security requirements section;
# (ii) a derived security requirements section.
# The basic security requirements are obtained from FIPS Publication 200, which
# provides the high-level and fundamental security requirements for federal
# information and information systems. The derived security requirements, which
# supplement the basic security requirements, are taken from the security controls
# in NIST Special Publication 800-53.
# This profile configures Oracle Linux 7 to the NIST Special
# Publication 800-53 controls identified for securing Controlled Unclassified
# Information (CUI).
#
# Profile ID:  xccdf_org.ssgproject.content_profile_cui
# Benchmark ID:  xccdf_org.ssgproject.content_benchmark_OL-7
# Benchmark Version:  0.1.80
# XCCDF Version:  1.2
#
# This file can be generated by OpenSCAP using:
# $ oscap xccdf generate fix --profile xccdf_org.ssgproject.content_profile_cui --fix-type bash ssg-ol7-ds.xml
#
# This Bash Remediation Script is generated from an XCCDF profile without preliminary evaluation.
# It attempts to fix every selected rule, even if the system is already compliant.
#
# How to apply this Bash Remediation Script:
# $ sudo ./remediation-script.sh
#
###############################################################################

###############################################################################
# BEGIN fix (1 / 104) for 'xccdf_org.ssgproject.content_rule_package_dracut-fips_installed'
###############################################################################
(>&2 echo "Remediating rule 1/104: 'xccdf_org.ssgproject.content_rule_package_dracut-fips_installed'")
# Remediation is applicable only in certain platforms
if ( ( ! ( [ "${container:-}" == "bwrap-osbuild" ] ) && rpm --quiet -q kernel || rpm --quiet -q kernel-uek ) ); then

if ! rpm -q --quiet "dracut-fips" ; then
    yum install -y "dracut-fips"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_dracut-fips_installed'

###############################################################################
# BEGIN fix (2 / 104) for 'xccdf_org.ssgproject.content_rule_grub2_enable_fips_mode'
###############################################################################
(>&2 echo "Remediating rule 2/104: 'xccdf_org.ssgproject.content_rule_grub2_enable_fips_mode'")
# Remediation is applicable only in certain platforms
if ( ( rpm --quiet -q grub2-common && ! ( [ "${container:-}" == "bwrap-osbuild" ] ) && rpm --quiet -q kernel || rpm --quiet -q kernel-uek ) ); then

# prelink not installed
if test -e /etc/sysconfig/prelink -o -e /usr/sbin/prelink; then
    if grep -q ^PRELINKING /etc/sysconfig/prelink
    then
        sed -i 's/^PRELINKING[:blank:]*=[:blank:]*[:alpha:]*/PRELINKING=no/' /etc/sysconfig/prelink
    else
        printf '\n' >> /etc/sysconfig/prelink
        printf '%s\n' '# Set PRELINKING=no per security requirements' 'PRELINKING=no' >> /etc/sysconfig/prelink
    fi

    # Undo previous prelink changes to binaries if prelink is available.
    if test -x /usr/sbin/prelink; then
        /usr/sbin/prelink -ua
    fi
fi

if grep -q -m1 -o aes /proc/cpuinfo; then
	if ! rpm -q --quiet "dracut-fips-aesni" ; then
    yum install -y "dracut-fips-aesni"
fi
fi
if ! rpm -q --quiet "dracut-fips" ; then
    yum install -y "dracut-fips"
fi

dracut -f

# Correct the form of default kernel command line in  grub
if grep -q '^GRUB_CMDLINE_LINUX=.*fips=.*"'  /etc/default/grub; then
	# modify the GRUB command-line if a fips= arg already exists
	sed -i 's/\(^GRUB_CMDLINE_LINUX=".*\)fips=[^[:space:]]*\(.*"\)/\1 fips=1 \2/'  /etc/default/grub
else
	# no existing fips=arg is present, append it
	sed -i 's/\(^GRUB_CMDLINE_LINUX=".*\)"/\1 fips=1"/'  /etc/default/grub
fi

# Get the UUID of the device mounted at root (/).
ROOT_UUID=$(findmnt --noheadings --output uuid --target /)

# Get the UUID of the device mounted at /boot.
BOOT_UUID=$(findmnt --noheadings --output uuid --target /boot)

if [ "${ROOT_UUID}" == "${BOOT_UUID}" ]; then
	# root UUID same as boot UUID, so do not modify the GRUB command-line or add boot arg to kernel command line
	# Correct the form of kernel command line for each installed kernel in the bootloader
	/sbin/grubby --update-kernel=ALL --args="fips=1"
else
	# root UUID different from boot UUID, so modify the GRUB command-line and add boot arg to kernel command line
	if grep -q '^GRUB_CMDLINE_LINUX=".*boot=.*"'  /etc/default/grub; then
		# modify the GRUB command-line if a boot= arg already exists
		sed -i 's/\(^GRUB_CMDLINE_LINUX=".*\)boot=[^[:space:]]*\(.*"\)/\1 boot=UUID='"${BOOT_UUID} \2/" /etc/default/grub
	else
		# no existing boot=arg is present, append it
		sed -i 's/\(^GRUB_CMDLINE_LINUX=".*\)"/\1 boot=UUID='${BOOT_UUID}'"/'  /etc/default/grub
	fi
	# Correct the form of kernel command line for each installed kernel in the bootloader
	/sbin/grubby --update-kernel=ALL --args="fips=1 boot=UUID=${BOOT_UUID}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_grub2_enable_fips_mode'

###############################################################################
# BEGIN fix (3 / 104) for 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_globally_activated'
###############################################################################
(>&2 echo "Remediating rule 3/104: 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_globally_activated'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q yum; then

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^gpgcheck")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^gpgcheck\\>" "/etc/yum.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^gpgcheck\\>.*/$escaped_formatted_output/gi" "/etc/yum.conf"
else
    if [[ -s "/etc/yum.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/yum.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/yum.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/yum.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_globally_activated'

###############################################################################
# BEGIN fix (4 / 104) for 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_local_packages'
###############################################################################
(>&2 echo "Remediating rule 4/104: 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_local_packages'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q yum; then

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^localpkg_gpgcheck")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^localpkg_gpgcheck\\>" "/etc/yum.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^localpkg_gpgcheck\\>.*/$escaped_formatted_output/gi" "/etc/yum.conf"
else
    if [[ -s "/etc/yum.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/yum.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/yum.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/yum.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_local_packages'

###############################################################################
# BEGIN fix (5 / 104) for 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_never_disabled'
###############################################################################
(>&2 echo "Remediating rule 5/104: 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_never_disabled'")

sed -i 's/gpgcheck\s*=.*/gpgcheck=1/g' /etc/yum.repos.d/*

# END fix for 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_never_disabled'

###############################################################################
# BEGIN fix (6 / 104) for 'xccdf_org.ssgproject.content_rule_ensure_oracle_gpgkey_installed'
###############################################################################
(>&2 echo "Remediating rule 6/104: 'xccdf_org.ssgproject.content_rule_ensure_oracle_gpgkey_installed'")
# OL fingerprints below retrieved from: https://linux.oracle.com/security/gpg/#gpg
readonly OL_RELEASE_FINGERPRINT="42144123FECFC55B9086313D72F97B74EC551F03"
readonly OL_AUXILIARY_FINGERPRINT=""

FINGERPRINTS_REGEX="${OL_RELEASE_FINGERPRINT}"

if [[ -n "$OL_AUXILIARY_FINGERPRINT" ]]; then
    FINGERPRINTS_REGEX+="|${OL_AUXILIARY_FINGERPRINT}"
fi

# Location of the key we would like to import (once it's integrity verified)
readonly OL_RELEASE_KEY="/etc/pki/rpm-gpg/RPM-GPG-KEY-oracle"

RPM_GPG_DIR_PERMS=$(stat -c %a "$(dirname "$OL_RELEASE_KEY")")

# Verify /etc/pki/rpm-gpg directory permissions are safe
if [ "${RPM_GPG_DIR_PERMS}" -le "755" ]
then
  # If they are safe, try to obtain fingerprints from the key file
  # (to ensure there won't be e.g. CRC error)
  
    readarray -t GPG_OUT < <(gpg --with-fingerprint --with-colons "$OL_RELEASE_KEY" | grep "^fpr" | cut -d ":" -f 10)
  

  GPG_RESULT=$?
  # No CRC error, safe to proceed
  if [ "${GPG_RESULT}" -eq "0" ]
  then
    # Filter just hexadecimal fingerprints from gpg's output from
    # processing of a key file
    echo "${GPG_OUT[*]}" | grep -vE "$FINGERPRINTS_REGEX" || {
      # If $ OL_RELEASE_KEY file doesn't contain any keys with unknown fingerprint, import it
      rpm --import "${OL_RELEASE_KEY}"
    }
  fi
fi

# END fix for 'xccdf_org.ssgproject.content_rule_ensure_oracle_gpgkey_installed'

###############################################################################
# BEGIN fix (7 / 104) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_remember'
###############################################################################
(>&2 echo "Remediating rule 7/104: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_remember'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q libpwquality; }; then

var_password_pam_unix_remember='5'






if [ -f /usr/bin/authselect ]; then
    if authselect list-features sssd | grep -q with-pwhistory; then
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi
        authselect enable-feature with-pwhistory

        authselect apply-changes -b
    else
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
        
        if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*" "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1requisite \2/" "$PAM_FILE_PATH"
            else
                LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                if [ ! -z $LAST_MATCH_LINE ]; then
                    sed -i --follow-symlinks $LAST_MATCH_LINE" a password     requisite    pam_pwhistory.so" "$PAM_FILE_PATH"
                else
                    echo "password    requisite    pam_pwhistory.so" >> "$PAM_FILE_PATH"
                fi
            fi
        fi
    fi
else

    
    if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*" "/etc/pam.d/system-auth"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "/etc/pam.d/system-auth")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1requisite \2/" "/etc/pam.d/system-auth"
        else
            LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "/etc/pam.d/system-auth" | tail -n 1 | cut -d: -f 1)
            if [ ! -z $LAST_MATCH_LINE ]; then
                sed -i --follow-symlinks $LAST_MATCH_LINE" a password     requisite    pam_pwhistory.so" "/etc/pam.d/system-auth"
            else
                echo "password    requisite    pam_pwhistory.so" >> "/etc/pam.d/system-auth"
            fi
        fi
    fi

fi

PWHISTORY_CONF="/etc/security/pwhistory.conf"
if [ -f $PWHISTORY_CONF ]; then
    regex="^\s*remember\s*="
    line="remember = $var_password_pam_unix_remember"
    if ! grep -q $regex $PWHISTORY_CONF; then
        echo $line >> $PWHISTORY_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(remember\s*=\s*\)\(\S\+\)|\1'"$var_password_pam_unix_remember"'|g' $PWHISTORY_CONF
    fi
    if [ -e "/etc/pam.d/system-auth" ] ; then
        PAM_FILE_PATH="/etc/pam.d/system-auth"
        if [ -f /usr/bin/authselect ]; then
            
            if ! authselect check; then
            echo "
            authselect integrity check failed. Remediation aborted!
            This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
            It is not recommended to manually edit the PAM files when authselect tool is available.
            In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
            exit 1
            fi

            CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
            # If not already in use, a custom profile is created preserving the enabled features.
            if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                # The "local" profile does not contain essential security features required by multiple Benchmarks.
                # If currently used, it is replaced by "sssd", which is the best option in this case.
                if [[ $CURRENT_PROFILE == local ]]; then
                    CURRENT_PROFILE="sssd"
                fi
                authselect create-profile hardening -b $CURRENT_PROFILE
                CURRENT_PROFILE="custom/hardening"
                
                authselect apply-changes -b --backup=before-hardening-custom-profile
                authselect select $CURRENT_PROFILE
                for feature in $ENABLED_FEATURES; do
                    authselect enable-feature $feature;
                done
                
                authselect apply-changes -b --backup=after-hardening-custom-profile
            fi
            PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
            PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

            authselect apply-changes -b
        fi
        
    if grep -qP "^\s*password\s.*\bpam_pwhistory.so\s.*\bremember\b" "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks "s/(.*password.*pam_pwhistory.so.*)\bremember\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
    fi
        if [ -f /usr/bin/authselect ]; then
            
            authselect apply-changes -b
        fi
    else
        echo "/etc/pam.d/system-auth was not found" >&2
    fi
else
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    

    if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*" "$PAM_FILE_PATH"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1requisite \2/" "$PAM_FILE_PATH"
        else
            echo "password    requisite    pam_pwhistory.so" >> "$PAM_FILE_PATH"
        fi
    fi
    # Check the option
    if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*\sremember\b" "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks "/\s*password\s+requisite\s+pam_pwhistory.so.*/ s/$/ remember=$var_password_pam_unix_remember/" "$PAM_FILE_PATH"
    else
        sed -i -E --follow-symlinks "s/(\s*password\s+requisite\s+pam_pwhistory.so\s+.*)(remember=)[[:alnum:]]*\s*(.*)/\1\2$var_password_pam_unix_remember \3/" "$PAM_FILE_PATH"
    fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_remember'

###############################################################################
# BEGIN fix (8 / 104) for 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny'
###############################################################################
(>&2 echo "Remediating rule 8/104: 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q pam; }; then

var_accounts_passwords_pam_faillock_deny='3'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
SKIP_FAILLOCK_CHECK=false

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ] || [ "$SKIP_FAILLOCK_CHECK" = "true" ]; then
    regex="^\s*deny\s*="
    line="deny = $var_accounts_passwords_pam_faillock_deny"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(deny\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_deny"'|g' $FAILLOCK_CONF
    fi
    
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    # The "local" profile does not contain essential security features required by multiple Benchmarks.
                    # If currently used, it is replaced by "sssd", which is the best option in this case.
                    if [[ $CURRENT_PROFILE == local ]]; then
                        CURRENT_PROFILE="sssd"
                    fi
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP "^\s*auth\s.*\bpam_faillock.so\s.*\bdeny\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "s/(.*auth.*pam_faillock.so.*)\bdeny\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
    
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so\s+(preauth|authfail).*deny' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*/ s/$/ deny='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ deny='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*\)\('"deny"'=\)\S\+\b\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_deny"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"deny"'=\)\S\+\b\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_deny"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny'

###############################################################################
# BEGIN fix (9 / 104) for 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_interval'
###############################################################################
(>&2 echo "Remediating rule 9/104: 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_interval'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q pam; }; then

var_accounts_passwords_pam_faillock_fail_interval='900'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
SKIP_FAILLOCK_CHECK=false

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ] || [ "$SKIP_FAILLOCK_CHECK" = "true" ]; then
    regex="^\s*fail_interval\s*="
    line="fail_interval = $var_accounts_passwords_pam_faillock_fail_interval"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(fail_interval\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_fail_interval"'|g' $FAILLOCK_CONF
    fi
    
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    # The "local" profile does not contain essential security features required by multiple Benchmarks.
                    # If currently used, it is replaced by "sssd", which is the best option in this case.
                    if [[ $CURRENT_PROFILE == local ]]; then
                        CURRENT_PROFILE="sssd"
                    fi
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP "^\s*auth\s.*\bpam_faillock.so\s.*\bfail_interval\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "s/(.*auth.*pam_faillock.so.*)\bfail_interval\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
    
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so\s+(preauth|authfail).*fail_interval' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*/ s/$/ fail_interval='"$var_accounts_passwords_pam_faillock_fail_interval"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ fail_interval='"$var_accounts_passwords_pam_faillock_fail_interval"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*\)\('"fail_interval"'=\)\S\+\b\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_fail_interval"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"fail_interval"'=\)\S\+\b\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_fail_interval"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_interval'

###############################################################################
# BEGIN fix (10 / 104) for 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_unlock_time'
###############################################################################
(>&2 echo "Remediating rule 10/104: 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_unlock_time'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q pam; }; then

var_accounts_passwords_pam_faillock_unlock_time='0'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
SKIP_FAILLOCK_CHECK=false

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ] || [ "$SKIP_FAILLOCK_CHECK" = "true" ]; then
    regex="^\s*unlock_time\s*="
    line="unlock_time = $var_accounts_passwords_pam_faillock_unlock_time"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(unlock_time\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_unlock_time"'|g' $FAILLOCK_CONF
    fi
    
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    # The "local" profile does not contain essential security features required by multiple Benchmarks.
                    # If currently used, it is replaced by "sssd", which is the best option in this case.
                    if [[ $CURRENT_PROFILE == local ]]; then
                        CURRENT_PROFILE="sssd"
                    fi
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP "^\s*auth\s.*\bpam_faillock.so\s.*\bunlock_time\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "s/(.*auth.*pam_faillock.so.*)\bunlock_time\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
    
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so\s+(preauth|authfail).*unlock_time' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*/ s/$/ unlock_time='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ unlock_time='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*\)\('"unlock_time"'=\)\S\+\b\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"unlock_time"'=\)\S\+\b\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_unlock_time'

###############################################################################
# BEGIN fix (11 / 104) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_dcredit'
###############################################################################
(>&2 echo "Remediating rule 11/104: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_dcredit'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q libpwquality; }; then

var_password_pam_dcredit='-1'



if grep -sq dcredit /etc/security/pwquality.conf.d/*.conf ; then
    sed -i "/dcredit/d" /etc/security/pwquality.conf.d/*.conf
fi



if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bdcredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bdcredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi
if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bdcredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bdcredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^dcredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_dcredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^dcredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^dcredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_dcredit'

###############################################################################
# BEGIN fix (12 / 104) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_difok'
###############################################################################
(>&2 echo "Remediating rule 12/104: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_difok'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q libpwquality; }; then

var_password_pam_difok='4'



if grep -sq difok /etc/security/pwquality.conf.d/*.conf ; then
    sed -i "/difok/d" /etc/security/pwquality.conf.d/*.conf
fi



if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bdifok\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bdifok\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi
if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bdifok\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bdifok\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^difok")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_difok"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^difok\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^difok\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_difok'

###############################################################################
# BEGIN fix (13 / 104) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_lcredit'
###############################################################################
(>&2 echo "Remediating rule 13/104: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_lcredit'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q libpwquality; }; then

var_password_pam_lcredit='-1'



if grep -sq lcredit /etc/security/pwquality.conf.d/*.conf ; then
    sed -i "/lcredit/d" /etc/security/pwquality.conf.d/*.conf
fi



if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\blcredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\blcredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi
if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\blcredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\blcredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^lcredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_lcredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^lcredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^lcredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_lcredit'

###############################################################################
# BEGIN fix (14 / 104) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_maxclassrepeat'
###############################################################################
(>&2 echo "Remediating rule 14/104: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_maxclassrepeat'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q libpwquality; }; then

var_password_pam_maxclassrepeat='4'



if grep -sq maxclassrepeat /etc/security/pwquality.conf.d/*.conf ; then
    sed -i "/maxclassrepeat/d" /etc/security/pwquality.conf.d/*.conf
fi



if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bmaxclassrepeat\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bmaxclassrepeat\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi
if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bmaxclassrepeat\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bmaxclassrepeat\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^maxclassrepeat")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_maxclassrepeat"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^maxclassrepeat\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^maxclassrepeat\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_maxclassrepeat'

###############################################################################
# BEGIN fix (15 / 104) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_maxrepeat'
###############################################################################
(>&2 echo "Remediating rule 15/104: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_maxrepeat'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q libpwquality; }; then

var_password_pam_maxrepeat='3'



if grep -sq maxrepeat /etc/security/pwquality.conf.d/*.conf ; then
    sed -i "/maxrepeat/d" /etc/security/pwquality.conf.d/*.conf
fi



if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bmaxrepeat\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bmaxrepeat\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi
if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bmaxrepeat\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bmaxrepeat\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^maxrepeat")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_maxrepeat"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^maxrepeat\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^maxrepeat\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_maxrepeat'

###############################################################################
# BEGIN fix (16 / 104) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_minlen'
###############################################################################
(>&2 echo "Remediating rule 16/104: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_minlen'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q libpwquality; }; then

var_password_pam_minlen='12'



if grep -sq minlen /etc/security/pwquality.conf.d/*.conf ; then
    sed -i "/minlen/d" /etc/security/pwquality.conf.d/*.conf
fi



if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bminlen\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bminlen\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi
if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bminlen\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bminlen\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^minlen")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_minlen"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^minlen\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^minlen\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_minlen'

###############################################################################
# BEGIN fix (17 / 104) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_ocredit'
###############################################################################
(>&2 echo "Remediating rule 17/104: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_ocredit'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q libpwquality; }; then

var_password_pam_ocredit='-1'



if grep -sq ocredit /etc/security/pwquality.conf.d/*.conf ; then
    sed -i "/ocredit/d" /etc/security/pwquality.conf.d/*.conf
fi



if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bocredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bocredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi
if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bocredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bocredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ocredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_ocredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ocredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^ocredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_ocredit'

###############################################################################
# BEGIN fix (18 / 104) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_ucredit'
###############################################################################
(>&2 echo "Remediating rule 18/104: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_ucredit'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q libpwquality; }; then

var_password_pam_ucredit='-1'



if grep -sq ucredit /etc/security/pwquality.conf.d/*.conf ; then
    sed -i "/ucredit/d" /etc/security/pwquality.conf.d/*.conf
fi



if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bucredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bucredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi
if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bucredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bucredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ucredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_ucredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ucredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^ucredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_ucredit'

###############################################################################
# BEGIN fix (19 / 104) for 'xccdf_org.ssgproject.content_rule_service_debug-shell_disabled'
###############################################################################
(>&2 echo "Remediating rule 19/104: 'xccdf_org.ssgproject.content_rule_service_debug-shell_disabled'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
  "$SYSTEMCTL_EXEC" stop 'debug-shell.service'
fi
"$SYSTEMCTL_EXEC" disable 'debug-shell.service'
"$SYSTEMCTL_EXEC" mask 'debug-shell.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files debug-shell.socket; then
    if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
      "$SYSTEMCTL_EXEC" stop 'debug-shell.socket'
    fi
    "$SYSTEMCTL_EXEC" mask 'debug-shell.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'debug-shell.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_service_debug-shell_disabled'

###############################################################################
# BEGIN fix (20 / 104) for 'xccdf_org.ssgproject.content_rule_disable_ctrlaltdel_burstaction'
###############################################################################
(>&2 echo "Remediating rule 20/104: 'xccdf_org.ssgproject.content_rule_disable_ctrlaltdel_burstaction'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q systemd; }; then

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^CtrlAltDelBurstAction=")

# shellcheck disable=SC2059
printf -v formatted_output "%s=%s" "$stripped_key" "none"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^CtrlAltDelBurstAction=\\>" "/etc/systemd/system.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^CtrlAltDelBurstAction=\\>.*/$escaped_formatted_output/gi" "/etc/systemd/system.conf"
else
    if [[ -s "/etc/systemd/system.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/systemd/system.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/systemd/system.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/systemd/system.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_disable_ctrlaltdel_burstaction'

###############################################################################
# BEGIN fix (21 / 104) for 'xccdf_org.ssgproject.content_rule_disable_ctrlaltdel_reboot'
###############################################################################
(>&2 echo "Remediating rule 21/104: 'xccdf_org.ssgproject.content_rule_disable_ctrlaltdel_reboot'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    systemctl disable ctrl-alt-del.target
    systemctl mask ctrl-alt-del.target
else
    systemctl disable --now ctrl-alt-del.target
    systemctl mask --now ctrl-alt-del.target
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_disable_ctrlaltdel_reboot'

###############################################################################
# BEGIN fix (22 / 104) for 'xccdf_org.ssgproject.content_rule_grub2_disable_interactive_boot'
###############################################################################
(>&2 echo "Remediating rule 22/104: 'xccdf_org.ssgproject.content_rule_grub2_disable_interactive_boot'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q grub2-common; }; then

# Verify that Interactive Boot is Disabled in /etc/default/grub
CONFIRM_SPAWN_YES="systemd.confirm_spawn\(=\(1\|yes\|true\|on\)\|\b\)"
CONFIRM_SPAWN_NO="systemd.confirm_spawn=no"

if grep -q "\(GRUB_CMDLINE_LINUX\|GRUB_CMDLINE_LINUX_DEFAULT\)" /etc/default/grub
then
	sed -i "s/${CONFIRM_SPAWN_YES}/${CONFIRM_SPAWN_NO}/" /etc/default/grub
fi

# make sure GRUB_DISABLE_RECOVERY=true
if grep -q '^GRUB_DISABLE_RECOVERY=.*'  '/etc/default/grub' ; then
       # modify the GRUB command-line if an GRUB_DISABLE_RECOVERY= arg already exists
       sed -i 's/GRUB_DISABLE_RECOVERY=.*/GRUB_DISABLE_RECOVERY=true/' /etc/default/grub
else
       # no GRUB_DISABLE_RECOVERY=arg is present, append it to file
       echo "GRUB_DISABLE_RECOVERY=true"  >> '/etc/default/grub'
fi



# Remove 'systemd.confirm_spawn' kernel argument also from runtime settings
/sbin/grubby --update-kernel=ALL --remove-args="systemd.confirm_spawn"


#Regen grub.cfg handle updated GRUB_DISABLE_RECOVERY and confirm_spawn
grub2-mkconfig -o /boot/grub2/grub.cfg

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_grub2_disable_interactive_boot'

###############################################################################
# BEGIN fix (23 / 104) for 'xccdf_org.ssgproject.content_rule_require_singleuser_auth'
###############################################################################
(>&2 echo "Remediating rule 23/104: 'xccdf_org.ssgproject.content_rule_require_singleuser_auth'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

found=false

# set value in all files if they contain section or key
for f in $(echo -n "/etc/systemd/system/rescue.service.d/10-oscap.conf /etc/systemd/system/rescue.service.d/*.conf"); do
    if [ ! -e "$f" ]; then
        continue
    fi

    # find key in section and change value
    if grep -qzosP "(?m)^[[:space:]]*\[Service\]([^\n\[]*\n+)+?[[:space:]]*ExecStart" "$f"; then
        if ! grep -qzosP "(?m)^[[:space:]]*ExecStart[[:space:]]*=[[:space:]]*\nExecStart=-/usr/lib/systemd/systemd-sulogin-shell rescue" "$f"; then

            sed -i "/^[[:space:]]*ExecStart/s/\([[:blank:]]*=[[:blank:]]*\).*/\1\nExecStart=-\/usr\/lib\/systemd\/systemd-sulogin-shell rescue/" "$f"

        fi

        found=true

    # find section and add key = value to it
    elif grep -qs "^[[:space:]]*\[Service\]" "$f"; then

            sed -i "/^[[:space:]]*\[Service\]/a ExecStart=\nExecStart=-\/usr\/lib\/systemd\/systemd-sulogin-shell rescue" "$f"

            found=true
    fi
done

# if section not in any file, append section with key = value to FIRST file in files parameter
if ! $found ; then
    file=$(echo "/etc/systemd/system/rescue.service.d/10-oscap.conf /etc/systemd/system/rescue.service.d/*.conf" | cut -f1 -d ' ')
    mkdir -p "$(dirname "$file")"

    echo -e "[Service]\nExecStart=\nExecStart=-/usr/lib/systemd/systemd-sulogin-shell rescue" >> "$file"

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_require_singleuser_auth'

###############################################################################
# BEGIN fix (24 / 104) for 'xccdf_org.ssgproject.content_rule_package_screen_installed'
###############################################################################
(>&2 echo "Remediating rule 24/104: 'xccdf_org.ssgproject.content_rule_package_screen_installed'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if ! rpm -q --quiet "screen" ; then
    yum install -y "screen"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_screen_installed'

###############################################################################
# BEGIN fix (25 / 104) for 'xccdf_org.ssgproject.content_rule_accounts_password_minlen_login_defs'
###############################################################################
(>&2 echo "Remediating rule 25/104: 'xccdf_org.ssgproject.content_rule_accounts_password_minlen_login_defs'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q shadow-utils; }; then

var_accounts_password_minlen_login_defs='12'

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^PASS_MIN_LEN")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$var_accounts_password_minlen_login_defs"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^PASS_MIN_LEN\\>" "/etc/login.defs"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^PASS_MIN_LEN\\>.*/$escaped_formatted_output/gi" "/etc/login.defs"
else
    if [[ -s "/etc/login.defs" ]] && [[ -n "$(tail -c 1 -- "/etc/login.defs" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/login.defs"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/login.defs"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_minlen_login_defs'

###############################################################################
# BEGIN fix (26 / 104) for 'xccdf_org.ssgproject.content_rule_no_empty_passwords'
###############################################################################
(>&2 echo "Remediating rule 26/104: 'xccdf_org.ssgproject.content_rule_no_empty_passwords'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature without-nullok

authselect apply-changes -b
else
    
if grep -qP "^\s*auth\s+sufficient\s+pam_unix.so\s.*\bnullok\b" "/etc/pam.d/system-auth"; then
    sed -i -E --follow-symlinks "s/(.*auth.*sufficient.*pam_unix.so.*)\bnullok\b=?[[:alnum:]]*(.*)/\1\2/g" "/etc/pam.d/system-auth"
fi
    
if grep -qP "^\s*password\s+sufficient\s+pam_unix.so\s.*\bnullok\b" "/etc/pam.d/system-auth"; then
    sed -i -E --follow-symlinks "s/(.*password.*sufficient.*pam_unix.so.*)\bnullok\b=?[[:alnum:]]*(.*)/\1\2/g" "/etc/pam.d/system-auth"
fi
    
if grep -qP "^\s*auth\s+sufficient\s+pam_unix.so\s.*\bnullok\b" "/etc/pam.d/password-auth"; then
    sed -i -E --follow-symlinks "s/(.*auth.*sufficient.*pam_unix.so.*)\bnullok\b=?[[:alnum:]]*(.*)/\1\2/g" "/etc/pam.d/password-auth"
fi
    
if grep -qP "^\s*password\s+sufficient\s+pam_unix.so\s.*\bnullok\b" "/etc/pam.d/password-auth"; then
    sed -i -E --follow-symlinks "s/(.*password.*sufficient.*pam_unix.so.*)\bnullok\b=?[[:alnum:]]*(.*)/\1\2/g" "/etc/pam.d/password-auth"
fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_no_empty_passwords'

###############################################################################
# BEGIN fix (27 / 104) for 'xccdf_org.ssgproject.content_rule_securetty_root_login_console_only'
###############################################################################
(>&2 echo "Remediating rule 27/104: 'xccdf_org.ssgproject.content_rule_securetty_root_login_console_only'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

sed -i '/^vc\/[0-9]/d' /etc/securetty

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_securetty_root_login_console_only'

###############################################################################
# BEGIN fix (28 / 104) for 'xccdf_org.ssgproject.content_rule_accounts_max_concurrent_login_sessions'
###############################################################################
(>&2 echo "Remediating rule 28/104: 'xccdf_org.ssgproject.content_rule_accounts_max_concurrent_login_sessions'")
# Remediation is applicable only in certain platforms
if ( ( rpm --quiet -q pam && rpm --quiet -q kernel || rpm --quiet -q kernel-uek ) ); then

var_accounts_max_concurrent_login_sessions='10'


if grep -q '^[^#]*\<maxlogins\>' /etc/security/limits.d/*.conf; then
	sed -i "/^[^#]*\<maxlogins\>/ s/maxlogins.*/maxlogins $var_accounts_max_concurrent_login_sessions/" /etc/security/limits.d/*.conf
elif grep -q '^[^#]*\<maxlogins\>' /etc/security/limits.conf; then
	sed -i "/^[^#]*\<maxlogins\>/ s/maxlogins.*/maxlogins $var_accounts_max_concurrent_login_sessions/" /etc/security/limits.conf
else
	echo "*	hard	maxlogins	$var_accounts_max_concurrent_login_sessions" >> /etc/security/limits.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_max_concurrent_login_sessions'

###############################################################################
# BEGIN fix (29 / 104) for 'xccdf_org.ssgproject.content_rule_accounts_umask_etc_bashrc'
###############################################################################
(>&2 echo "Remediating rule 29/104: 'xccdf_org.ssgproject.content_rule_accounts_umask_etc_bashrc'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q bash; }; then

var_accounts_user_umask='027'






grep -q "^[^#]*\bumask" /etc/bashrc && \
  sed -i -E -e "s/^([^#]*\bumask)[[:space:]]+[[:digit:]]+/\1 $var_accounts_user_umask/g" /etc/bashrc
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/bashrc
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_umask_etc_bashrc'

###############################################################################
# BEGIN fix (30 / 104) for 'xccdf_org.ssgproject.content_rule_accounts_umask_etc_csh_cshrc'
###############################################################################
(>&2 echo "Remediating rule 30/104: 'xccdf_org.ssgproject.content_rule_accounts_umask_etc_csh_cshrc'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

var_accounts_user_umask='027'


grep -q "^\s*umask" /etc/csh.cshrc && \
  sed -i -E -e "s/^(\s*umask).*/\1 $var_accounts_user_umask/g" /etc/csh.cshrc
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/csh.cshrc
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_umask_etc_csh_cshrc'

###############################################################################
# BEGIN fix (31 / 104) for 'xccdf_org.ssgproject.content_rule_accounts_umask_etc_profile'
###############################################################################
(>&2 echo "Remediating rule 31/104: 'xccdf_org.ssgproject.content_rule_accounts_umask_etc_profile'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

var_accounts_user_umask='027'


readarray -t profile_files < <(find /etc/profile.d/ -type f -name '*.sh' -or -name 'sh.local')

for file in "${profile_files[@]}" /etc/profile; do
  grep -qE '^[^#]*umask' "$file" && sed -i -E "s/^(\s*umask\s*)[0-7]+/\1$var_accounts_user_umask/g" "$file"
done

if ! grep -qrE '^[^#]*umask' /etc/profile*; then
  echo "umask $var_accounts_user_umask" >> /etc/profile
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_umask_etc_profile'

###############################################################################
# BEGIN fix (32 / 104) for 'xccdf_org.ssgproject.content_rule_grub2_vsyscall_argument'
###############################################################################
(>&2 echo "Remediating rule 32/104: 'xccdf_org.ssgproject.content_rule_grub2_vsyscall_argument'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q grub2-common && rpm --quiet -q kernel || rpm --quiet -q kernel-uek ) && { ( ( grep -sqE "^.*\.x86_64$" /proc/sys/kernel/osrelease || grep -sqE "^x86_64$" /proc/sys/kernel/arch; ) ); }; then

if { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    KARGS_DIR="/usr/lib/bootc/kargs.d/"
    if grep -q -E "vsyscall" "$KARGS_DIR/*.toml" ; then
        sed -i -E "s/^(\s*kargs\s*=\s*\[.*)\"vsyscall=[^\"]*\"(.*]\s*)/\1\"vsyscall=none\"\2/" "$KARGS_DIR/*.toml"
    else
        echo "kargs = [\"vsyscall=none\"]" >> "$KARGS_DIR/10-vsyscall.toml"
    fi
else


    # Correct the form of default kernel command line in GRUB
    if grep -q '^\s*GRUB_CMDLINE_LINUX=.*vsyscall=.*"'  '/etc/default/grub' ; then
           # modify the GRUB command-line if an vsyscall= arg already exists
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)vsyscall=[^[:space:]]\+\(.*\"\)/\1vsyscall=none\2/"  '/etc/default/grub'
    # Add to already existing GRUB_CMDLINE_LINUX parameters
    elif grep -q '^\s*GRUB_CMDLINE_LINUX='  '/etc/default/grub' ; then
           # no vsyscall=arg is present, append it
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)\"/\1 vsyscall=none\"/"  '/etc/default/grub'
    # Add GRUB_CMDLINE_LINUX parameters line
    else
           echo "GRUB_CMDLINE_LINUX=\"vsyscall=none\"" >> '/etc/default/grub'
    fi
    grubby --update-kernel=ALL --args=vsyscall=none

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_grub2_vsyscall_argument'

###############################################################################
# BEGIN fix (33 / 104) for 'xccdf_org.ssgproject.content_rule_grub2_uefi_password'
###############################################################################
(>&2 echo "Remediating rule 33/104: 'xccdf_org.ssgproject.content_rule_grub2_uefi_password'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_grub2_uefi_password' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_grub2_uefi_password'

###############################################################################
# BEGIN fix (34 / 104) for 'xccdf_org.ssgproject.content_rule_service_firewalld_enabled'
###############################################################################
(>&2 echo "Remediating rule 34/104: 'xccdf_org.ssgproject.content_rule_service_firewalld_enabled'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q firewalld; }; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'firewalld.service'
if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
  "$SYSTEMCTL_EXEC" start 'firewalld.service'
fi
"$SYSTEMCTL_EXEC" enable 'firewalld.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_service_firewalld_enabled'

###############################################################################
# BEGIN fix (35 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_ra'
###############################################################################
(>&2 echo "Remediating rule 35/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_ra'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.all.accept_ra from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_ra.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_ra" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_accept_ra_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_ra
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.all.accept_ra="$sysctl_net_ipv6_conf_all_accept_ra_value"
fi

#
# If net.ipv6.conf.all.accept_ra present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_ra = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_ra")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_ra_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_ra\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.accept_ra\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_ra'

###############################################################################
# BEGIN fix (36 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_redirects'
###############################################################################
(>&2 echo "Remediating rule 36/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_redirects'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.all.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_accept_redirects_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.all.accept_redirects="$sysctl_net_ipv6_conf_all_accept_redirects_value"
fi

#
# If net.ipv6.conf.all.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_redirects'

###############################################################################
# BEGIN fix (37 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_source_route'
###############################################################################
(>&2 echo "Remediating rule 37/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_source_route'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.all.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_source_route" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_accept_source_route_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_source_route
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.all.accept_source_route="$sysctl_net_ipv6_conf_all_accept_source_route_value"
fi

#
# If net.ipv6.conf.all.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_source_route'

###############################################################################
# BEGIN fix (38 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_ra'
###############################################################################
(>&2 echo "Remediating rule 38/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_ra'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.default.accept_ra from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_ra.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_ra" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_accept_ra_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_ra
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.default.accept_ra="$sysctl_net_ipv6_conf_default_accept_ra_value"
fi

#
# If net.ipv6.conf.default.accept_ra present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_ra = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_ra")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_ra_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_ra\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_ra\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_ra'

###############################################################################
# BEGIN fix (39 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_redirects'
###############################################################################
(>&2 echo "Remediating rule 39/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_redirects'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.default.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_accept_redirects_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.default.accept_redirects="$sysctl_net_ipv6_conf_default_accept_redirects_value"
fi

#
# If net.ipv6.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_redirects'

###############################################################################
# BEGIN fix (40 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_source_route'
###############################################################################
(>&2 echo "Remediating rule 40/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_source_route'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.default.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_source_route" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_accept_source_route_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_source_route
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.default.accept_source_route="$sysctl_net_ipv6_conf_default_accept_source_route_value"
fi

#
# If net.ipv6.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_source_route'

###############################################################################
# BEGIN fix (41 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_redirects'
###############################################################################
(>&2 echo "Remediating rule 41/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_redirects'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.all.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.accept_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_accept_redirects_value='0'


#
# Set runtime for net.ipv4.conf.all.accept_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.all.accept_redirects="$sysctl_net_ipv4_conf_all_accept_redirects_value"
fi

#
# If net.ipv4.conf.all.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.accept_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_redirects'

###############################################################################
# BEGIN fix (42 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_source_route'
###############################################################################
(>&2 echo "Remediating rule 42/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_source_route'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.all.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.accept_source_route" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_accept_source_route_value='0'


#
# Set runtime for net.ipv4.conf.all.accept_source_route
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.all.accept_source_route="$sysctl_net_ipv4_conf_all_accept_source_route_value"
fi

#
# If net.ipv4.conf.all.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_source_route'

###############################################################################
# BEGIN fix (43 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_log_martians'
###############################################################################
(>&2 echo "Remediating rule 43/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_log_martians'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.all.log_martians from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.log_martians.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.log_martians" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_log_martians_value='1'


#
# Set runtime for net.ipv4.conf.all.log_martians
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.all.log_martians="$sysctl_net_ipv4_conf_all_log_martians_value"
fi

#
# If net.ipv4.conf.all.log_martians present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.log_martians = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.log_martians")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_log_martians_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.log_martians\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.log_martians\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_log_martians'

###############################################################################
# BEGIN fix (44 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_rp_filter'
###############################################################################
(>&2 echo "Remediating rule 44/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_rp_filter'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.all.rp_filter from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.rp_filter.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.rp_filter" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_rp_filter_value='1'


#
# Set runtime for net.ipv4.conf.all.rp_filter
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.all.rp_filter="$sysctl_net_ipv4_conf_all_rp_filter_value"
fi

#
# If net.ipv4.conf.all.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.rp_filter = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.rp_filter")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_rp_filter_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.rp_filter\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.rp_filter\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_rp_filter'

###############################################################################
# BEGIN fix (45 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_secure_redirects'
###############################################################################
(>&2 echo "Remediating rule 45/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_secure_redirects'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.all.secure_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.secure_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.secure_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_secure_redirects_value='0'


#
# Set runtime for net.ipv4.conf.all.secure_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.all.secure_redirects="$sysctl_net_ipv4_conf_all_secure_redirects_value"
fi

#
# If net.ipv4.conf.all.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.secure_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.secure_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_secure_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.secure_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.secure_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_secure_redirects'

###############################################################################
# BEGIN fix (46 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_redirects'
###############################################################################
(>&2 echo "Remediating rule 46/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_redirects'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.default.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.accept_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_accept_redirects_value='0'


#
# Set runtime for net.ipv4.conf.default.accept_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.default.accept_redirects="$sysctl_net_ipv4_conf_default_accept_redirects_value"
fi

#
# If net.ipv4.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_redirects'

###############################################################################
# BEGIN fix (47 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_source_route'
###############################################################################
(>&2 echo "Remediating rule 47/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_source_route'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.default.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.accept_source_route" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_accept_source_route_value='0'


#
# Set runtime for net.ipv4.conf.default.accept_source_route
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.default.accept_source_route="$sysctl_net_ipv4_conf_default_accept_source_route_value"
fi

#
# If net.ipv4.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_source_route'

###############################################################################
# BEGIN fix (48 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_log_martians'
###############################################################################
(>&2 echo "Remediating rule 48/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_log_martians'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.default.log_martians from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.log_martians.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.log_martians" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_log_martians_value='1'


#
# Set runtime for net.ipv4.conf.default.log_martians
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.default.log_martians="$sysctl_net_ipv4_conf_default_log_martians_value"
fi

#
# If net.ipv4.conf.default.log_martians present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.log_martians = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.log_martians")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_log_martians_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.log_martians\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.log_martians\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_log_martians'

###############################################################################
# BEGIN fix (49 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_rp_filter'
###############################################################################
(>&2 echo "Remediating rule 49/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_rp_filter'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.default.rp_filter from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.rp_filter.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.rp_filter" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_rp_filter_value='1'


#
# Set runtime for net.ipv4.conf.default.rp_filter
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.default.rp_filter="$sysctl_net_ipv4_conf_default_rp_filter_value"
fi

#
# If net.ipv4.conf.default.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.rp_filter = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.rp_filter")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_rp_filter_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.rp_filter\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.rp_filter\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_rp_filter'

###############################################################################
# BEGIN fix (50 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_secure_redirects'
###############################################################################
(>&2 echo "Remediating rule 50/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_secure_redirects'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.default.secure_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.secure_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.secure_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_secure_redirects_value='0'


#
# Set runtime for net.ipv4.conf.default.secure_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.default.secure_redirects="$sysctl_net_ipv4_conf_default_secure_redirects_value"
fi

#
# If net.ipv4.conf.default.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.secure_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.secure_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_secure_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.secure_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.secure_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_secure_redirects'

###############################################################################
# BEGIN fix (51 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_echo_ignore_broadcasts'
###############################################################################
(>&2 echo "Remediating rule 51/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_echo_ignore_broadcasts'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.icmp_echo_ignore_broadcasts from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.icmp_echo_ignore_broadcasts.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.icmp_echo_ignore_broadcasts" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value='1'


#
# Set runtime for net.ipv4.icmp_echo_ignore_broadcasts
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.icmp_echo_ignore_broadcasts="$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value"
fi

#
# If net.ipv4.icmp_echo_ignore_broadcasts present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_echo_ignore_broadcasts = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.icmp_echo_ignore_broadcasts")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.icmp_echo_ignore_broadcasts\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.icmp_echo_ignore_broadcasts\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_echo_ignore_broadcasts'

###############################################################################
# BEGIN fix (52 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_ignore_bogus_error_responses'
###############################################################################
(>&2 echo "Remediating rule 52/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_ignore_bogus_error_responses'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.icmp_ignore_bogus_error_responses from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.icmp_ignore_bogus_error_responses.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.icmp_ignore_bogus_error_responses" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value='1'


#
# Set runtime for net.ipv4.icmp_ignore_bogus_error_responses
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.icmp_ignore_bogus_error_responses="$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value"
fi

#
# If net.ipv4.icmp_ignore_bogus_error_responses present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_ignore_bogus_error_responses = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.icmp_ignore_bogus_error_responses")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.icmp_ignore_bogus_error_responses\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.icmp_ignore_bogus_error_responses\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_ignore_bogus_error_responses'

###############################################################################
# BEGIN fix (53 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_syncookies'
###############################################################################
(>&2 echo "Remediating rule 53/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_syncookies'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.tcp_syncookies from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.tcp_syncookies.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.tcp_syncookies" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_tcp_syncookies_value='1'


#
# Set runtime for net.ipv4.tcp_syncookies
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.tcp_syncookies="$sysctl_net_ipv4_tcp_syncookies_value"
fi

#
# If net.ipv4.tcp_syncookies present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.tcp_syncookies = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.tcp_syncookies")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_tcp_syncookies_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.tcp_syncookies\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.tcp_syncookies\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_syncookies'

###############################################################################
# BEGIN fix (54 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_send_redirects'
###############################################################################
(>&2 echo "Remediating rule 54/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_send_redirects'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.all.send_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.send_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.send_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for net.ipv4.conf.all.send_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.all.send_redirects="0"
fi

#
# If net.ipv4.conf.all.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.all.send_redirects = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.send_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.send_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.send_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_send_redirects'

###############################################################################
# BEGIN fix (55 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_send_redirects'
###############################################################################
(>&2 echo "Remediating rule 55/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_send_redirects'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.default.send_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.send_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.send_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for net.ipv4.conf.default.send_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.default.send_redirects="0"
fi

#
# If net.ipv4.conf.default.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.default.send_redirects = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.send_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.send_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.send_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_send_redirects'

###############################################################################
# BEGIN fix (56 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_ip_forward'
###############################################################################
(>&2 echo "Remediating rule 56/104: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_ip_forward'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.ip_forward from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.ip_forward.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.ip_forward" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for net.ipv4.ip_forward
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.ip_forward="0"
fi

#
# If net.ipv4.ip_forward present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.ip_forward = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.ip_forward")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.ip_forward\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.ip_forward\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_ip_forward'

###############################################################################
# BEGIN fix (57 / 104) for 'xccdf_org.ssgproject.content_rule_kernel_module_dccp_disabled'
###############################################################################
(>&2 echo "Remediating rule 57/104: 'xccdf_org.ssgproject.content_rule_kernel_module_dccp_disabled'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if LC_ALL=C grep -q -m 1 "^install dccp" /etc/modprobe.d/dccp.conf ; then
	
	sed -i 's#^install dccp.*#install dccp /bin/false#g' /etc/modprobe.d/dccp.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/dccp.conf
	echo "install dccp /bin/false" >> /etc/modprobe.d/dccp.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist dccp$" /etc/modprobe.d/dccp.conf ; then
	echo "blacklist dccp" >> /etc/modprobe.d/dccp.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_kernel_module_dccp_disabled'

###############################################################################
# BEGIN fix (58 / 104) for 'xccdf_org.ssgproject.content_rule_kernel_module_sctp_disabled'
###############################################################################
(>&2 echo "Remediating rule 58/104: 'xccdf_org.ssgproject.content_rule_kernel_module_sctp_disabled'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if LC_ALL=C grep -q -m 1 "^install sctp" /etc/modprobe.d/sctp.conf ; then
	
	sed -i 's#^install sctp.*#install sctp /bin/false#g' /etc/modprobe.d/sctp.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/sctp.conf
	echo "install sctp /bin/false" >> /etc/modprobe.d/sctp.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist sctp$" /etc/modprobe.d/sctp.conf ; then
	echo "blacklist sctp" >> /etc/modprobe.d/sctp.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_kernel_module_sctp_disabled'

###############################################################################
# BEGIN fix (59 / 104) for 'xccdf_org.ssgproject.content_rule_kernel_module_bluetooth_disabled'
###############################################################################
(>&2 echo "Remediating rule 59/104: 'xccdf_org.ssgproject.content_rule_kernel_module_bluetooth_disabled'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

if LC_ALL=C grep -q -m 1 "^install bluetooth" /etc/modprobe.d/bluetooth.conf ; then
	
	sed -i 's#^install bluetooth.*#install bluetooth /bin/false#g' /etc/modprobe.d/bluetooth.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/bluetooth.conf
	echo "install bluetooth /bin/false" >> /etc/modprobe.d/bluetooth.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist bluetooth$" /etc/modprobe.d/bluetooth.conf ; then
	echo "blacklist bluetooth" >> /etc/modprobe.d/bluetooth.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_kernel_module_bluetooth_disabled'

###############################################################################
# BEGIN fix (60 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_fs_protected_hardlinks'
###############################################################################
(>&2 echo "Remediating rule 60/104: 'xccdf_org.ssgproject.content_rule_sysctl_fs_protected_hardlinks'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of fs.protected_hardlinks from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*fs.protected_hardlinks.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "fs.protected_hardlinks" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for fs.protected_hardlinks
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w fs.protected_hardlinks="1"
fi

#
# If fs.protected_hardlinks present in /etc/sysctl.conf, change value to "1"
#	else, add "fs.protected_hardlinks = 1" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^fs.protected_hardlinks")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^fs.protected_hardlinks\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^fs.protected_hardlinks\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_fs_protected_hardlinks'

###############################################################################
# BEGIN fix (61 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_fs_protected_symlinks'
###############################################################################
(>&2 echo "Remediating rule 61/104: 'xccdf_org.ssgproject.content_rule_sysctl_fs_protected_symlinks'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of fs.protected_symlinks from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*fs.protected_symlinks.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "fs.protected_symlinks" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for fs.protected_symlinks
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w fs.protected_symlinks="1"
fi

#
# If fs.protected_symlinks present in /etc/sysctl.conf, change value to "1"
#	else, add "fs.protected_symlinks = 1" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^fs.protected_symlinks")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^fs.protected_symlinks\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^fs.protected_symlinks\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_fs_protected_symlinks'

###############################################################################
# BEGIN fix (62 / 104) for 'xccdf_org.ssgproject.content_rule_service_autofs_disabled'
###############################################################################
(>&2 echo "Remediating rule 62/104: 'xccdf_org.ssgproject.content_rule_service_autofs_disabled'")
# Remediation is applicable only in certain platforms
if ( ( rpm --quiet -q autofs && rpm --quiet -q kernel || rpm --quiet -q kernel-uek ) ); then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
  "$SYSTEMCTL_EXEC" stop 'autofs.service'
fi
"$SYSTEMCTL_EXEC" disable 'autofs.service'
"$SYSTEMCTL_EXEC" mask 'autofs.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files autofs.socket; then
    if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
      "$SYSTEMCTL_EXEC" stop 'autofs.socket'
    fi
    "$SYSTEMCTL_EXEC" mask 'autofs.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'autofs.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_service_autofs_disabled'

###############################################################################
# BEGIN fix (63 / 104) for 'xccdf_org.ssgproject.content_rule_kernel_module_cramfs_disabled'
###############################################################################
(>&2 echo "Remediating rule 63/104: 'xccdf_org.ssgproject.content_rule_kernel_module_cramfs_disabled'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

if LC_ALL=C grep -q -m 1 "^install cramfs" /etc/modprobe.d/cramfs.conf ; then
	
	sed -i 's#^install cramfs.*#install cramfs /bin/false#g' /etc/modprobe.d/cramfs.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/cramfs.conf
	echo "install cramfs /bin/false" >> /etc/modprobe.d/cramfs.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist cramfs$" /etc/modprobe.d/cramfs.conf ; then
	echo "blacklist cramfs" >> /etc/modprobe.d/cramfs.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_kernel_module_cramfs_disabled'

###############################################################################
# BEGIN fix (64 / 104) for 'xccdf_org.ssgproject.content_rule_kernel_module_usb-storage_disabled'
###############################################################################
(>&2 echo "Remediating rule 64/104: 'xccdf_org.ssgproject.content_rule_kernel_module_usb-storage_disabled'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

if LC_ALL=C grep -q -m 1 "^install usb-storage" /etc/modprobe.d/usb-storage.conf ; then
	
	sed -i 's#^install usb-storage.*#install usb-storage /bin/false#g' /etc/modprobe.d/usb-storage.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/usb-storage.conf
	echo "install usb-storage /bin/false" >> /etc/modprobe.d/usb-storage.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist usb-storage$" /etc/modprobe.d/usb-storage.conf ; then
	echo "blacklist usb-storage" >> /etc/modprobe.d/usb-storage.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_kernel_module_usb-storage_disabled'

###############################################################################
# BEGIN fix (65 / 104) for 'xccdf_org.ssgproject.content_rule_mount_option_dev_shm_nodev'
###############################################################################
(>&2 echo "Remediating rule 65/104: 'xccdf_org.ssgproject.content_rule_mount_option_dev_shm_nodev'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ); then

function perform_remediation {

    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /dev/shm)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nodev)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type="tmpfs"
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo "tmpfs /dev/shm tmpfs defaults,${previous_mount_opts}nodev 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nodev"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nodev|" /etc/fstab
    fi


    if mkdir -p "/dev/shm"; then
        if mountpoint -q "/dev/shm"; then
            mount -o remount --target "/dev/shm"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_dev_shm_nodev'

###############################################################################
# BEGIN fix (66 / 104) for 'xccdf_org.ssgproject.content_rule_mount_option_dev_shm_noexec'
###############################################################################
(>&2 echo "Remediating rule 66/104: 'xccdf_org.ssgproject.content_rule_mount_option_dev_shm_noexec'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ); then

function perform_remediation {

    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /dev/shm)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|noexec)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type="tmpfs"
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo "tmpfs /dev/shm tmpfs defaults,${previous_mount_opts}noexec 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "noexec"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,noexec|" /etc/fstab
    fi


    if mkdir -p "/dev/shm"; then
        if mountpoint -q "/dev/shm"; then
            mount -o remount --target "/dev/shm"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_dev_shm_noexec'

###############################################################################
# BEGIN fix (67 / 104) for 'xccdf_org.ssgproject.content_rule_mount_option_dev_shm_nosuid'
###############################################################################
(>&2 echo "Remediating rule 67/104: 'xccdf_org.ssgproject.content_rule_mount_option_dev_shm_nosuid'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ); then

function perform_remediation {

    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /dev/shm)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type="tmpfs"
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo "tmpfs /dev/shm tmpfs defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi


    if mkdir -p "/dev/shm"; then
        if mountpoint -q "/dev/shm"; then
            mount -o remount --target "/dev/shm"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_dev_shm_nosuid'

###############################################################################
# BEGIN fix (68 / 104) for 'xccdf_org.ssgproject.content_rule_mount_option_home_nodev'
###############################################################################
(>&2 echo "Remediating rule 68/104: 'xccdf_org.ssgproject.content_rule_mount_option_home_nodev'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ) && { ( findmnt --kernel "/home" > /dev/null || findmnt --fstab "/home" > /dev/null ); }; then

function perform_remediation (){

    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" $1)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nodev)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " $1  defaults,${previous_mount_opts}nodev 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nodev"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nodev|" /etc/fstab
    fi

    if mkdir -p "$1"; then
        if mountpoint -q "$1"; then
            mount -o remount --target "$1"
        fi
    fi
}

readarray -t home_directories  < \
    <(awk -F':' '{if ($3>=1000 && $3!= 65534) print $6}' /etc/passwd )


for home_directory in "${home_directories[@]}"
do
    if [ -d $home_directory ]; then
        fstab_mount_point=$(df $home_directory | awk '/^\/dev/ {print $6}')
        if  ! grep -qP "^/$|^/lib$|^/opt$|^/usr$|^/bin$|^/sbin$|^/boot$|^/dev$|^/proc$" <<< $fstab_mount_point
        then
            perform_remediation "$fstab_mount_point"
        fi
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_home_nodev'

###############################################################################
# BEGIN fix (69 / 104) for 'xccdf_org.ssgproject.content_rule_mount_option_home_nosuid'
###############################################################################
(>&2 echo "Remediating rule 69/104: 'xccdf_org.ssgproject.content_rule_mount_option_home_nosuid'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ); then

function perform_remediation (){

    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" $1)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " $1  defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi

    if mkdir -p "$1"; then
        if mountpoint -q "$1"; then
            mount -o remount --target "$1"
        fi
    fi
}

readarray -t home_directories  < \
    <(awk -F':' '{if ($3>=1000 && $3!= 65534) print $6}' /etc/passwd )


for home_directory in "${home_directories[@]}"
do
    if [ -d $home_directory ]; then
        fstab_mount_point=$(df $home_directory | awk '/^\/dev/ {print $6}')
        if  ! grep -qP "^/$|^/lib$|^/opt$|^/usr$|^/bin$|^/sbin$|^/boot$|^/dev$|^/proc$" <<< $fstab_mount_point
        then
            perform_remediation "$fstab_mount_point"
        fi
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_home_nosuid'

###############################################################################
# BEGIN fix (70 / 104) for 'xccdf_org.ssgproject.content_rule_mount_option_tmp_nodev'
###############################################################################
(>&2 echo "Remediating rule 70/104: 'xccdf_org.ssgproject.content_rule_mount_option_tmp_nodev'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ) && { ( findmnt --kernel "/tmp" > /dev/null || findmnt --fstab "/tmp" > /dev/null ); }; then

function perform_remediation {

    
        # the mount point /tmp has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nodev)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /tmp  defaults,${previous_mount_opts}nodev 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nodev"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nodev|" /etc/fstab
    fi


    if mkdir -p "/tmp"; then
        if mountpoint -q "/tmp"; then
            mount -o remount --target "/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_tmp_nodev'

###############################################################################
# BEGIN fix (71 / 104) for 'xccdf_org.ssgproject.content_rule_mount_option_tmp_noexec'
###############################################################################
(>&2 echo "Remediating rule 71/104: 'xccdf_org.ssgproject.content_rule_mount_option_tmp_noexec'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ) && { ( findmnt --kernel "/tmp" > /dev/null || findmnt --fstab "/tmp" > /dev/null ); }; then

function perform_remediation {

    
        # the mount point /tmp has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|noexec)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /tmp  defaults,${previous_mount_opts}noexec 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "noexec"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,noexec|" /etc/fstab
    fi


    if mkdir -p "/tmp"; then
        if mountpoint -q "/tmp"; then
            mount -o remount --target "/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_tmp_noexec'

###############################################################################
# BEGIN fix (72 / 104) for 'xccdf_org.ssgproject.content_rule_mount_option_tmp_nosuid'
###############################################################################
(>&2 echo "Remediating rule 72/104: 'xccdf_org.ssgproject.content_rule_mount_option_tmp_nosuid'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ) && { ( findmnt --kernel "/tmp" > /dev/null || findmnt --fstab "/tmp" > /dev/null ); }; then

function perform_remediation {

    
        # the mount point /tmp has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /tmp  defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi


    if mkdir -p "/tmp"; then
        if mountpoint -q "/tmp"; then
            mount -o remount --target "/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_tmp_nosuid'

###############################################################################
# BEGIN fix (73 / 104) for 'xccdf_org.ssgproject.content_rule_mount_option_var_tmp_nodev'
###############################################################################
(>&2 echo "Remediating rule 73/104: 'xccdf_org.ssgproject.content_rule_mount_option_var_tmp_nodev'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ) && { ( findmnt --kernel "/var/tmp" > /dev/null || findmnt --fstab "/var/tmp" > /dev/null ); }; then

function perform_remediation {

    
        # the mount point /var/tmp has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/var/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/var/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /var/tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /var/tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nodev)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /var/tmp  defaults,${previous_mount_opts}nodev 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nodev"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nodev|" /etc/fstab
    fi


    if mkdir -p "/var/tmp"; then
        if mountpoint -q "/var/tmp"; then
            mount -o remount --target "/var/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_var_tmp_nodev'

###############################################################################
# BEGIN fix (74 / 104) for 'xccdf_org.ssgproject.content_rule_mount_option_var_tmp_noexec'
###############################################################################
(>&2 echo "Remediating rule 74/104: 'xccdf_org.ssgproject.content_rule_mount_option_var_tmp_noexec'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ) && { ( findmnt --kernel "/var/tmp" > /dev/null || findmnt --fstab "/var/tmp" > /dev/null ); }; then

function perform_remediation {

    
        # the mount point /var/tmp has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/var/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/var/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /var/tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /var/tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|noexec)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /var/tmp  defaults,${previous_mount_opts}noexec 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "noexec"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,noexec|" /etc/fstab
    fi


    if mkdir -p "/var/tmp"; then
        if mountpoint -q "/var/tmp"; then
            mount -o remount --target "/var/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_var_tmp_noexec'

###############################################################################
# BEGIN fix (75 / 104) for 'xccdf_org.ssgproject.content_rule_mount_option_var_tmp_nosuid'
###############################################################################
(>&2 echo "Remediating rule 75/104: 'xccdf_org.ssgproject.content_rule_mount_option_var_tmp_nosuid'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ) && { ( findmnt --kernel "/var/tmp" > /dev/null || findmnt --fstab "/var/tmp" > /dev/null ); }; then

function perform_remediation {

    
        # the mount point /var/tmp has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/var/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/var/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /var/tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /var/tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /var/tmp  defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi


    if mkdir -p "/var/tmp"; then
        if mountpoint -q "/var/tmp"; then
            mount -o remount --target "/var/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_var_tmp_nosuid'

###############################################################################
# BEGIN fix (76 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_dmesg_restrict'
###############################################################################
(>&2 echo "Remediating rule 76/104: 'xccdf_org.ssgproject.content_rule_sysctl_kernel_dmesg_restrict'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of kernel.dmesg_restrict from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.dmesg_restrict.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.dmesg_restrict" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.dmesg_restrict
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w kernel.dmesg_restrict="1"
fi

#
# If kernel.dmesg_restrict present in /etc/sysctl.conf, change value to "1"
#	else, add "kernel.dmesg_restrict = 1" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.dmesg_restrict")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.dmesg_restrict\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.dmesg_restrict\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_dmesg_restrict'

###############################################################################
# BEGIN fix (77 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_kexec_load_disabled'
###############################################################################
(>&2 echo "Remediating rule 77/104: 'xccdf_org.ssgproject.content_rule_sysctl_kernel_kexec_load_disabled'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of kernel.kexec_load_disabled from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.kexec_load_disabled.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.kexec_load_disabled" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.kexec_load_disabled
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w kernel.kexec_load_disabled="1"
fi

#
# If kernel.kexec_load_disabled present in /etc/sysctl.conf, change value to "1"
#	else, add "kernel.kexec_load_disabled = 1" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.kexec_load_disabled")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.kexec_load_disabled\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.kexec_load_disabled\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_kexec_load_disabled'

###############################################################################
# BEGIN fix (78 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_yama_ptrace_scope'
###############################################################################
(>&2 echo "Remediating rule 78/104: 'xccdf_org.ssgproject.content_rule_sysctl_kernel_yama_ptrace_scope'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of kernel.yama.ptrace_scope from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.yama.ptrace_scope.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.yama.ptrace_scope" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.yama.ptrace_scope
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w kernel.yama.ptrace_scope="1"
fi

#
# If kernel.yama.ptrace_scope present in /etc/sysctl.conf, change value to "1"
#	else, add "kernel.yama.ptrace_scope = 1" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.yama.ptrace_scope")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.yama.ptrace_scope\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.yama.ptrace_scope\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_yama_ptrace_scope'

###############################################################################
# BEGIN fix (79 / 104) for 'xccdf_org.ssgproject.content_rule_disable_users_coredumps'
###############################################################################
(>&2 echo "Remediating rule 79/104: 'xccdf_org.ssgproject.content_rule_disable_users_coredumps'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q pam; }; then

SECURITY_LIMITS_FILE="/etc/security/limits.conf"
DROPIN_DIR="/etc/security/limits.d"
DROPIN_FILE="$DROPIN_DIR/10-ssg-hardening.conf"
REGEX_CORRECT_VALUE="^\s*\*\s+hard\s+core\s+0\s*$"

# Remove bad configuration in drop-ins
if [ -d "$DROPIN_DIR" ]; then
    for override in "$DROPIN_DIR"/*.conf; do
        if [ -f "$override" ] && ! grep -qE "$REGEX_CORRECT_VALUE" "$override"; then
            sed -ir -E '/^[[:space:]]*\*[[:space:]]+hard[[:space:]]+core[[:space:]]+/ s/^/#/' "$override"
        fi
    done
fi

if [ -d "$DROPIN_DIR" ] && grep -qEr "$REGEX_CORRECT_VALUE" "$DROPIN_DIR"; then
    exit 0
elif [ ! -d "$DROPIN_DIR" ] && grep -qE "$REGEX_CORRECT_VALUE" "$SECURITY_LIMITS_FILE"; then
    exit 0
else
    mkdir -p "$DROPIN_DIR"
    echo "*     hard   core    0" >> $DROPIN_FILE
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_disable_users_coredumps'

###############################################################################
# BEGIN fix (80 / 104) for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_kptr_restrict'
###############################################################################
(>&2 echo "Remediating rule 80/104: 'xccdf_org.ssgproject.content_rule_sysctl_kernel_kptr_restrict'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of kernel.kptr_restrict from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.kptr_restrict.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.kptr_restrict" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_kernel_kptr_restrict_value='1'


#
# Set runtime for kernel.kptr_restrict
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w kernel.kptr_restrict="$sysctl_kernel_kptr_restrict_value"
fi

#
# If kernel.kptr_restrict present in /etc/sysctl.conf, change value to appropriate value
#	else, add "kernel.kptr_restrict = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.kptr_restrict")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_kernel_kptr_restrict_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.kptr_restrict\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.kptr_restrict\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_kptr_restrict'

###############################################################################
# BEGIN fix (81 / 104) for 'xccdf_org.ssgproject.content_rule_grub2_page_poison_argument'
###############################################################################
(>&2 echo "Remediating rule 81/104: 'xccdf_org.ssgproject.content_rule_grub2_page_poison_argument'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q grub2-common; }; then

if { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    KARGS_DIR="/usr/lib/bootc/kargs.d/"
    if grep -q -E "page_poison" "$KARGS_DIR/*.toml" ; then
        sed -i -E "s/^(\s*kargs\s*=\s*\[.*)\"page_poison=[^\"]*\"(.*]\s*)/\1\"page_poison=1\"\2/" "$KARGS_DIR/*.toml"
    else
        echo "kargs = [\"page_poison=1\"]" >> "$KARGS_DIR/10-page_poison.toml"
    fi
else


    # Correct the form of default kernel command line in GRUB
    if grep -q '^\s*GRUB_CMDLINE_LINUX=.*page_poison=.*"'  '/etc/default/grub' ; then
           # modify the GRUB command-line if an page_poison= arg already exists
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)page_poison=[^[:space:]]\+\(.*\"\)/\1page_poison=1\2/"  '/etc/default/grub'
    # Add to already existing GRUB_CMDLINE_LINUX parameters
    elif grep -q '^\s*GRUB_CMDLINE_LINUX='  '/etc/default/grub' ; then
           # no page_poison=arg is present, append it
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)\"/\1 page_poison=1\"/"  '/etc/default/grub'
    # Add GRUB_CMDLINE_LINUX parameters line
    else
           echo "GRUB_CMDLINE_LINUX=\"page_poison=1\"" >> '/etc/default/grub'
    fi
    grubby --update-kernel=ALL --args=page_poison=1

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_grub2_page_poison_argument'

###############################################################################
# BEGIN fix (82 / 104) for 'xccdf_org.ssgproject.content_rule_grub2_slub_debug_argument'
###############################################################################
(>&2 echo "Remediating rule 82/104: 'xccdf_org.ssgproject.content_rule_grub2_slub_debug_argument'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q grub2-common; }; then

var_slub_debug_options='P'



if { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    KARGS_DIR="/usr/lib/bootc/kargs.d/"
    if grep -q -E "slub_debug" "$KARGS_DIR/*.toml" ; then
        sed -i -E "s/^(\s*kargs\s*=\s*\[.*)\"slub_debug=[^\"]*\"(.*]\s*)/\1\"slub_debug=$var_slub_debug_options\"\2/" "$KARGS_DIR/*.toml"
    else
        echo "kargs = [\"slub_debug=$var_slub_debug_options\"]" >> "$KARGS_DIR/10-slub_debug.toml"
    fi
else


    # Correct the form of default kernel command line in GRUB
    if grep -q '^\s*GRUB_CMDLINE_LINUX=.*slub_debug=.*"'  '/etc/default/grub' ; then
           # modify the GRUB command-line if an slub_debug= arg already exists
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)slub_debug=[^[:space:]]\+\(.*\"\)/\1slub_debug=$var_slub_debug_options\2/"  '/etc/default/grub'
    # Add to already existing GRUB_CMDLINE_LINUX parameters
    elif grep -q '^\s*GRUB_CMDLINE_LINUX='  '/etc/default/grub' ; then
           # no slub_debug=arg is present, append it
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)\"/\1 slub_debug=$var_slub_debug_options\"/"  '/etc/default/grub'
    # Add GRUB_CMDLINE_LINUX parameters line
    else
           echo "GRUB_CMDLINE_LINUX=\"slub_debug=$var_slub_debug_options\"" >> '/etc/default/grub'
    fi
    grubby --update-kernel=ALL --args=slub_debug=$var_slub_debug_options

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_grub2_slub_debug_argument'

###############################################################################
# BEGIN fix (83 / 104) for 'xccdf_org.ssgproject.content_rule_selinux_policytype'
###############################################################################
(>&2 echo "Remediating rule 83/104: 'xccdf_org.ssgproject.content_rule_selinux_policytype'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

var_selinux_policy_name='targeted'

if [ -e "/etc/selinux/config" ] ; then
    
    LC_ALL=C sed -i "/^SELINUXTYPE=/Id" "/etc/selinux/config"
else
    touch "/etc/selinux/config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/selinux/config"

cp "/etc/selinux/config" "/etc/selinux/config.bak"
# Insert at the end of the file
printf '%s\n' "SELINUXTYPE=$var_selinux_policy_name" >> "/etc/selinux/config"
# Clean up after ourselves.
rm "/etc/selinux/config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_selinux_policytype'

###############################################################################
# BEGIN fix (84 / 104) for 'xccdf_org.ssgproject.content_rule_selinux_state'
###############################################################################
(>&2 echo "Remediating rule 84/104: 'xccdf_org.ssgproject.content_rule_selinux_state'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

var_selinux_state='enforcing'


if [ -e "/etc/selinux/config" ] ; then
    
    LC_ALL=C sed -i "/^SELINUX=/Id" "/etc/selinux/config"
else
    touch "/etc/selinux/config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/selinux/config"

cp "/etc/selinux/config" "/etc/selinux/config.bak"
# Insert at the end of the file
printf '%s\n' "SELINUX=$var_selinux_state" >> "/etc/selinux/config"
# Clean up after ourselves.
rm "/etc/selinux/config.bak"

fixfiles onboot

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_selinux_state'

###############################################################################
# BEGIN fix (85 / 104) for 'xccdf_org.ssgproject.content_rule_package_abrt_removed'
###############################################################################
(>&2 echo "Remediating rule 85/104: 'xccdf_org.ssgproject.content_rule_package_abrt_removed'")

# CAUTION: This remediation script will remove abrt
# from the system, and may remove any packages
# that depend on abrt. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "abrt" ; then
yum remove -y "abrt"
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_abrt_removed'

###############################################################################
# BEGIN fix (86 / 104) for 'xccdf_org.ssgproject.content_rule_service_kdump_disabled'
###############################################################################
(>&2 echo "Remediating rule 86/104: 'xccdf_org.ssgproject.content_rule_service_kdump_disabled'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
  "$SYSTEMCTL_EXEC" stop 'kdump.service'
fi
"$SYSTEMCTL_EXEC" disable 'kdump.service'
"$SYSTEMCTL_EXEC" mask 'kdump.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files kdump.socket; then
    if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
      "$SYSTEMCTL_EXEC" stop 'kdump.socket'
    fi
    "$SYSTEMCTL_EXEC" mask 'kdump.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'kdump.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_service_kdump_disabled'

###############################################################################
# BEGIN fix (87 / 104) for 'xccdf_org.ssgproject.content_rule_service_rpcbind_disabled'
###############################################################################
(>&2 echo "Remediating rule 87/104: 'xccdf_org.ssgproject.content_rule_service_rpcbind_disabled'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
  "$SYSTEMCTL_EXEC" stop 'rpcbind.service'
fi
"$SYSTEMCTL_EXEC" disable 'rpcbind.service'
"$SYSTEMCTL_EXEC" mask 'rpcbind.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files rpcbind.socket; then
    if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
      "$SYSTEMCTL_EXEC" stop 'rpcbind.socket'
    fi
    "$SYSTEMCTL_EXEC" mask 'rpcbind.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'rpcbind.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_service_rpcbind_disabled'

###############################################################################
# BEGIN fix (88 / 104) for 'xccdf_org.ssgproject.content_rule_sshd_set_keepalive_0'
###############################################################################
(>&2 echo "Remediating rule 88/104: 'xccdf_org.ssgproject.content_rule_sshd_set_keepalive_0'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*ClientAliveCountMax\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "ClientAliveCountMax 0" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sshd_set_keepalive_0'

###############################################################################
# BEGIN fix (89 / 104) for 'xccdf_org.ssgproject.content_rule_sshd_set_idle_timeout'
###############################################################################
(>&2 echo "Remediating rule 89/104: 'xccdf_org.ssgproject.content_rule_sshd_set_idle_timeout'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

sshd_idle_timeout_value='600'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*ClientAliveInterval\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "ClientAliveInterval $sshd_idle_timeout_value" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sshd_set_idle_timeout'

###############################################################################
# BEGIN fix (90 / 104) for 'xccdf_org.ssgproject.content_rule_disable_host_auth'
###############################################################################
(>&2 echo "Remediating rule 90/104: 'xccdf_org.ssgproject.content_rule_disable_host_auth'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*HostbasedAuthentication\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "HostbasedAuthentication no" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_disable_host_auth'

###############################################################################
# BEGIN fix (91 / 104) for 'xccdf_org.ssgproject.content_rule_sshd_disable_empty_passwords'
###############################################################################
(>&2 echo "Remediating rule 91/104: 'xccdf_org.ssgproject.content_rule_sshd_disable_empty_passwords'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*PermitEmptyPasswords\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "PermitEmptyPasswords no" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sshd_disable_empty_passwords'

###############################################################################
# BEGIN fix (92 / 104) for 'xccdf_org.ssgproject.content_rule_sshd_disable_gssapi_auth'
###############################################################################
(>&2 echo "Remediating rule 92/104: 'xccdf_org.ssgproject.content_rule_sshd_disable_gssapi_auth'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*GSSAPIAuthentication\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "GSSAPIAuthentication no" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sshd_disable_gssapi_auth'

###############################################################################
# BEGIN fix (93 / 104) for 'xccdf_org.ssgproject.content_rule_sshd_disable_kerb_auth'
###############################################################################
(>&2 echo "Remediating rule 93/104: 'xccdf_org.ssgproject.content_rule_sshd_disable_kerb_auth'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*KerberosAuthentication\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "KerberosAuthentication no" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sshd_disable_kerb_auth'

###############################################################################
# BEGIN fix (94 / 104) for 'xccdf_org.ssgproject.content_rule_sshd_disable_rhosts_rsa'
###############################################################################
(>&2 echo "Remediating rule 94/104: 'xccdf_org.ssgproject.content_rule_sshd_disable_rhosts_rsa'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*RhostsRSAAuthentication\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "RhostsRSAAuthentication no" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sshd_disable_rhosts_rsa'

###############################################################################
# BEGIN fix (95 / 104) for 'xccdf_org.ssgproject.content_rule_sshd_disable_root_login'
###############################################################################
(>&2 echo "Remediating rule 95/104: 'xccdf_org.ssgproject.content_rule_sshd_disable_root_login'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*PermitRootLogin\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "PermitRootLogin no" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sshd_disable_root_login'

###############################################################################
# BEGIN fix (96 / 104) for 'xccdf_org.ssgproject.content_rule_sshd_enable_strictmodes'
###############################################################################
(>&2 echo "Remediating rule 96/104: 'xccdf_org.ssgproject.content_rule_sshd_enable_strictmodes'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*StrictModes\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "StrictModes yes" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sshd_enable_strictmodes'

###############################################################################
# BEGIN fix (97 / 104) for 'xccdf_org.ssgproject.content_rule_sshd_enable_warning_banner'
###############################################################################
(>&2 echo "Remediating rule 97/104: 'xccdf_org.ssgproject.content_rule_sshd_enable_warning_banner'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*Banner\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "Banner /etc/issue" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sshd_enable_warning_banner'

###############################################################################
# BEGIN fix (98 / 104) for 'xccdf_org.ssgproject.content_rule_sshd_use_approved_ciphers'
###############################################################################
(>&2 echo "Remediating rule 98/104: 'xccdf_org.ssgproject.content_rule_sshd_use_approved_ciphers'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

sshd_approved_ciphers='aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc,[email protected]'


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^Ciphers")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$sshd_approved_ciphers"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^Ciphers\\>" "/etc/ssh/sshd_config"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^Ciphers\\>.*/$escaped_formatted_output/gi" "/etc/ssh/sshd_config"
else
    if [[ -s "/etc/ssh/sshd_config" ]] && [[ -n "$(tail -c 1 -- "/etc/ssh/sshd_config" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/ssh/sshd_config"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/ssh/sshd_config"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sshd_use_approved_ciphers'

###############################################################################
# BEGIN fix (99 / 104) for 'xccdf_org.ssgproject.content_rule_sshd_use_approved_macs'
###############################################################################
(>&2 echo "Remediating rule 99/104: 'xccdf_org.ssgproject.content_rule_sshd_use_approved_macs'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

sshd_approved_macs='hmac-sha2-512,hmac-sha2-256,hmac-sha1,[email protected],[email protected],[email protected]'


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^MACs")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$sshd_approved_macs"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^MACs\\>" "/etc/ssh/sshd_config"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^MACs\\>.*/$escaped_formatted_output/gi" "/etc/ssh/sshd_config"
else
    if [[ -s "/etc/ssh/sshd_config" ]] && [[ -n "$(tail -c 1 -- "/etc/ssh/sshd_config" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/ssh/sshd_config"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/ssh/sshd_config"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sshd_use_approved_macs'

###############################################################################
# BEGIN fix (100 / 104) for 'xccdf_org.ssgproject.content_rule_service_auditd_enabled'
###############################################################################
(>&2 echo "Remediating rule 100/104: 'xccdf_org.ssgproject.content_rule_service_auditd_enabled'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q audit; }; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'auditd.service'
if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
  "$SYSTEMCTL_EXEC" start 'auditd.service'
fi
"$SYSTEMCTL_EXEC" enable 'auditd.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_service_auditd_enabled'

###############################################################################
# BEGIN fix (101 / 104) for 'xccdf_org.ssgproject.content_rule_grub2_audit_argument'
###############################################################################
(>&2 echo "Remediating rule 101/104: 'xccdf_org.ssgproject.content_rule_grub2_audit_argument'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q grub2-common; }; then

if { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    KARGS_DIR="/usr/lib/bootc/kargs.d/"
    if grep -q -E "audit" "$KARGS_DIR/*.toml" ; then
        sed -i -E "s/^(\s*kargs\s*=\s*\[.*)\"audit=[^\"]*\"(.*]\s*)/\1\"audit=1\"\2/" "$KARGS_DIR/*.toml"
    else
        echo "kargs = [\"audit=1\"]" >> "$KARGS_DIR/10-audit.toml"
    fi
else


    # Correct the form of default kernel command line in GRUB
    if grep -q '^\s*GRUB_CMDLINE_LINUX=.*audit=.*"'  '/etc/default/grub' ; then
           # modify the GRUB command-line if an audit= arg already exists
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)audit=[^[:space:]]\+\(.*\"\)/\1audit=1\2/"  '/etc/default/grub'
    # Add to already existing GRUB_CMDLINE_LINUX parameters
    elif grep -q '^\s*GRUB_CMDLINE_LINUX='  '/etc/default/grub' ; then
           # no audit=arg is present, append it
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)\"/\1 audit=1\"/"  '/etc/default/grub'
    # Add GRUB_CMDLINE_LINUX parameters line
    else
           echo "GRUB_CMDLINE_LINUX=\"audit=1\"" >> '/etc/default/grub'
    fi
    grubby --update-kernel=ALL --args=audit=1

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_grub2_audit_argument'

###############################################################################
# BEGIN fix (102 / 104) for 'xccdf_org.ssgproject.content_rule_grub2_audit_backlog_limit_argument'
###############################################################################
(>&2 echo "Remediating rule 102/104: 'xccdf_org.ssgproject.content_rule_grub2_audit_backlog_limit_argument'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q grub2-common; }; then

var_audit_backlog_limit='8192'



if { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    KARGS_DIR="/usr/lib/bootc/kargs.d/"
    if grep -q -E "audit_backlog_limit" "$KARGS_DIR/*.toml" ; then
        sed -i -E "s/^(\s*kargs\s*=\s*\[.*)\"audit_backlog_limit=[^\"]*\"(.*]\s*)/\1\"audit_backlog_limit=$var_audit_backlog_limit\"\2/" "$KARGS_DIR/*.toml"
    else
        echo "kargs = [\"audit_backlog_limit=$var_audit_backlog_limit\"]" >> "$KARGS_DIR/10-audit_backlog_limit.toml"
    fi
else


    # Correct the form of default kernel command line in GRUB
    if grep -q '^\s*GRUB_CMDLINE_LINUX=.*audit_backlog_limit=.*"'  '/etc/default/grub' ; then
           # modify the GRUB command-line if an audit_backlog_limit= arg already exists
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)audit_backlog_limit=[^[:space:]]\+\(.*\"\)/\1audit_backlog_limit=$var_audit_backlog_limit\2/"  '/etc/default/grub'
    # Add to already existing GRUB_CMDLINE_LINUX parameters
    elif grep -q '^\s*GRUB_CMDLINE_LINUX='  '/etc/default/grub' ; then
           # no audit_backlog_limit=arg is present, append it
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)\"/\1 audit_backlog_limit=$var_audit_backlog_limit\"/"  '/etc/default/grub'
    # Add GRUB_CMDLINE_LINUX parameters line
    else
           echo "GRUB_CMDLINE_LINUX=\"audit_backlog_limit=$var_audit_backlog_limit\"" >> '/etc/default/grub'
    fi
    grubby --update-kernel=ALL --args=audit_backlog_limit=$var_audit_backlog_limit

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_grub2_audit_backlog_limit_argument'

###############################################################################
# BEGIN fix (103 / 104) for 'xccdf_org.ssgproject.content_rule_auditd_data_retention_flush'
###############################################################################
(>&2 echo "Remediating rule 103/104: 'xccdf_org.ssgproject.content_rule_auditd_data_retention_flush'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

var_auditd_flush='incremental_async'


AUDITCONFIG=/etc/audit/auditd.conf

# if flush is present, flush param edited to var_auditd_flush
# else flush param is defined by var_auditd_flush
#
# the freq param is only used for values 'incremental' and 'incremental_async' and will be
# commented out if flush != incremental or flush != incremental_async
#
# if flush == incremental or flush == incremental_async && freq param is not defined, it 
# will be defined as the package-default value of 20

grep -q ^flush $AUDITCONFIG && \
  sed -i 's/^flush.*/flush = '"$var_auditd_flush"'/g' $AUDITCONFIG
if ! [ $? -eq 0 ]; then
  echo "flush = $var_auditd_flush" >> $AUDITCONFIG
fi

if ! [ "$var_auditd_flush" == "incremental" ] && ! [ "$var_auditd_flush" == "incremental_async" ]; then
  sed -i 's/^freq/##freq/g' $AUDITCONFIG
elif [ "$var_auditd_flush" == "incremental" ] || [ "$var_auditd_flush" == "incremental_async" ]; then
  grep -q freq $AUDITCONFIG && \
    sed -i 's/^#\+freq/freq/g' $AUDITCONFIG
  if ! [ $? -eq 0 ]; then
    echo "freq = 20" >> $AUDITCONFIG
  fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_auditd_data_retention_flush'

###############################################################################
# BEGIN fix (104 / 104) for 'xccdf_org.ssgproject.content_rule_audit_rules_for_ospp'
###############################################################################
(>&2 echo "Remediating rule 104/104: 'xccdf_org.ssgproject.content_rule_audit_rules_for_ospp'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

cp /usr/share/doc/audit*/rules/10-base-config.rules /etc/audit/rules.d
cp /usr/share/doc/audit*/rules/11-loginuid.rules /etc/audit/rules.d
cp /usr/share/doc/audit*/rules/30-ospp-v42.rules /etc/audit/rules.d
cp /usr/share/doc/audit*/rules/43-module-load.rules /etc/audit/rules.d

augenrules --load

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_for_ospp'