#!/usr/bin/env bash
###############################################################################
#
# Bash Remediation Script for ANSSI-BP-028 (intermediary)
#
# Profile Description:
# This profile contains configurations that align to ANSSI-BP-028 at the intermediary hardening level.
# ANSSI is the French National Information Security Agency, and stands for Agence nationale de la sécurité des systèmes d'information.
# ANSSI-BP-028 is a configuration recommendation for GNU/Linux systems.
# A copy of the ANSSI-BP-028 can be found at the ANSSI website:
# https://www.ssi.gouv.fr/administration/guide/recommandations-de-securite-relatives-a-un-systeme-gnulinux/
#
# Profile ID:  xccdf_org.ssgproject.content_profile_anssi_nt28_intermediary
# Benchmark ID:  xccdf_org.ssgproject.content_benchmark_OL-7
# Benchmark Version:  0.1.80
# XCCDF Version:  1.2
#
# This file can be generated by OpenSCAP using:
# $ oscap xccdf generate fix --profile xccdf_org.ssgproject.content_profile_anssi_nt28_intermediary --fix-type bash ssg-ol7-ds.xml
#
# This Bash Remediation Script is generated from an XCCDF profile without preliminary evaluation.
# It attempts to fix every selected rule, even if the system is already compliant.
#
# How to apply this Bash Remediation Script:
# $ sudo ./remediation-script.sh
#
###############################################################################

###############################################################################
# BEGIN fix (1 / 229) for 'xccdf_org.ssgproject.content_rule_package_aide_installed'
###############################################################################
(>&2 echo "Remediating rule 1/229: 'xccdf_org.ssgproject.content_rule_package_aide_installed'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if ! rpm -q --quiet "aide" ; then
    yum install -y "aide"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_aide_installed'

###############################################################################
# BEGIN fix (2 / 229) for 'xccdf_org.ssgproject.content_rule_aide_build_database'
###############################################################################
(>&2 echo "Remediating rule 2/229: 'xccdf_org.ssgproject.content_rule_aide_build_database'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if ! rpm -q --quiet "aide" ; then
    yum install -y "aide"
fi

/usr/sbin/aide --init
/bin/cp -p /var/lib/aide/aide.db.new.gz /var/lib/aide/aide.db.gz

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_aide_build_database'

###############################################################################
# BEGIN fix (3 / 229) for 'xccdf_org.ssgproject.content_rule_partition_for_boot'
###############################################################################
(>&2 echo "Remediating rule 3/229: 'xccdf_org.ssgproject.content_rule_partition_for_boot'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_partition_for_boot' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_partition_for_boot'

###############################################################################
# BEGIN fix (4 / 229) for 'xccdf_org.ssgproject.content_rule_partition_for_home'
###############################################################################
(>&2 echo "Remediating rule 4/229: 'xccdf_org.ssgproject.content_rule_partition_for_home'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_partition_for_home' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_partition_for_home'

###############################################################################
# BEGIN fix (5 / 229) for 'xccdf_org.ssgproject.content_rule_partition_for_opt'
###############################################################################
(>&2 echo "Remediating rule 5/229: 'xccdf_org.ssgproject.content_rule_partition_for_opt'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_partition_for_opt' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_partition_for_opt'

###############################################################################
# BEGIN fix (6 / 229) for 'xccdf_org.ssgproject.content_rule_partition_for_srv'
###############################################################################
(>&2 echo "Remediating rule 6/229: 'xccdf_org.ssgproject.content_rule_partition_for_srv'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_partition_for_srv' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_partition_for_srv'

###############################################################################
# BEGIN fix (7 / 229) for 'xccdf_org.ssgproject.content_rule_partition_for_usr'
###############################################################################
(>&2 echo "Remediating rule 7/229: 'xccdf_org.ssgproject.content_rule_partition_for_usr'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_partition_for_usr' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_partition_for_usr'

###############################################################################
# BEGIN fix (8 / 229) for 'xccdf_org.ssgproject.content_rule_partition_for_var'
###############################################################################
(>&2 echo "Remediating rule 8/229: 'xccdf_org.ssgproject.content_rule_partition_for_var'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_partition_for_var' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_partition_for_var'

###############################################################################
# BEGIN fix (9 / 229) for 'xccdf_org.ssgproject.content_rule_partition_for_var_log'
###############################################################################
(>&2 echo "Remediating rule 9/229: 'xccdf_org.ssgproject.content_rule_partition_for_var_log'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_partition_for_var_log' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_partition_for_var_log'

###############################################################################
# BEGIN fix (10 / 229) for 'xccdf_org.ssgproject.content_rule_partition_for_var_tmp'
###############################################################################
(>&2 echo "Remediating rule 10/229: 'xccdf_org.ssgproject.content_rule_partition_for_var_tmp'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_partition_for_var_tmp' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_partition_for_var_tmp'

###############################################################################
# BEGIN fix (11 / 229) for 'xccdf_org.ssgproject.content_rule_systemd_tmp_mount_enabled'
###############################################################################
(>&2 echo "Remediating rule 11/229: 'xccdf_org.ssgproject.content_rule_systemd_tmp_mount_enabled'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ); then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'tmp.mount'
if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
  "$SYSTEMCTL_EXEC" start 'tmp.mount'
fi
"$SYSTEMCTL_EXEC" enable 'tmp.mount'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_systemd_tmp_mount_enabled'

###############################################################################
# BEGIN fix (12 / 229) for 'xccdf_org.ssgproject.content_rule_package_sudo_installed'
###############################################################################
(>&2 echo "Remediating rule 12/229: 'xccdf_org.ssgproject.content_rule_package_sudo_installed'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if ! rpm -q --quiet "sudo" ; then
    yum install -y "sudo"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_sudo_installed'

###############################################################################
# BEGIN fix (13 / 229) for 'xccdf_org.ssgproject.content_rule_directory_groupowner_etc_sudoersd'
###############################################################################
(>&2 echo "Remediating rule 13/229: 'xccdf_org.ssgproject.content_rule_directory_groupowner_etc_sudoersd'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

newgroup=""
if getent group "root" >/dev/null 2>&1; then
  newgroup="root"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "root is not a defined group on the system"
else
find -P /etc/sudoers.d/ -maxdepth 0 -type d  ! -group root -exec chgrp --no-dereference "$newgroup" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_directory_groupowner_etc_sudoersd'

###############################################################################
# BEGIN fix (14 / 229) for 'xccdf_org.ssgproject.content_rule_directory_owner_etc_sudoersd'
###############################################################################
(>&2 echo "Remediating rule 14/229: 'xccdf_org.ssgproject.content_rule_directory_owner_etc_sudoersd'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
find -P /etc/sudoers.d/ -maxdepth 0 -type d  ! -user 0 -exec chown --no-dereference "$newown" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_directory_owner_etc_sudoersd'

###############################################################################
# BEGIN fix (15 / 229) for 'xccdf_org.ssgproject.content_rule_directory_permissions_etc_sudoersd'
###############################################################################
(>&2 echo "Remediating rule 15/229: 'xccdf_org.ssgproject.content_rule_directory_permissions_etc_sudoersd'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

find -H /etc/sudoers.d/ -maxdepth 0 -perm /u+s,g+ws,o+xwrt -type d -exec chmod u-s,g-ws,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_directory_permissions_etc_sudoersd'

###############################################################################
# BEGIN fix (16 / 229) for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_sudoers'
###############################################################################
(>&2 echo "Remediating rule 16/229: 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_sudoers'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

newgroup=""
if getent group "root" >/dev/null 2>&1; then
  newgroup="root"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "root is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/sudoers" | grep -E -w -q "root"; then
    chgrp --no-dereference "$newgroup" /etc/sudoers
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_sudoers'

###############################################################################
# BEGIN fix (17 / 229) for 'xccdf_org.ssgproject.content_rule_file_owner_etc_sudoers'
###############################################################################
(>&2 echo "Remediating rule 17/229: 'xccdf_org.ssgproject.content_rule_file_owner_etc_sudoers'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/sudoers" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/sudoers
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_owner_etc_sudoers'

###############################################################################
# BEGIN fix (18 / 229) for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_sudoers'
###############################################################################
(>&2 echo "Remediating rule 18/229: 'xccdf_org.ssgproject.content_rule_file_permissions_etc_sudoers'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

chmod u-xws,g-xws,o-xwrt /etc/sudoers

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_sudoers'

###############################################################################
# BEGIN fix (19 / 229) for 'xccdf_org.ssgproject.content_rule_sudo_add_env_reset'
###############################################################################
(>&2 echo "Remediating rule 19/229: 'xccdf_org.ssgproject.content_rule_sudo_add_env_reset'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if /usr/sbin/visudo -qcf /etc/sudoers; then
    cp /etc/sudoers /etc/sudoers.bak
    if ! grep -P '^[\s]*Defaults\b[^!\n]*\benv_reset.*$' /etc/sudoers; then
        # sudoers file doesn't define Option env_reset
        echo "Defaults env_reset" >> /etc/sudoers
    fi
    
    # Check validity of sudoers and cleanup bak
    if /usr/sbin/visudo -qcf /etc/sudoers; then
        rm -f /etc/sudoers.bak
    else
        echo "Fail to validate remediated /etc/sudoers, reverting to original file."
        mv /etc/sudoers.bak /etc/sudoers
        false
    fi
else
    echo "Skipping remediation, /etc/sudoers failed to validate"
    false
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sudo_add_env_reset'

###############################################################################
# BEGIN fix (20 / 229) for 'xccdf_org.ssgproject.content_rule_sudo_add_ignore_dot'
###############################################################################
(>&2 echo "Remediating rule 20/229: 'xccdf_org.ssgproject.content_rule_sudo_add_ignore_dot'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if /usr/sbin/visudo -qcf /etc/sudoers; then
    cp /etc/sudoers /etc/sudoers.bak
    if ! grep -P '^[\s]*Defaults\b[^!\n]*\bignore_dot.*$' /etc/sudoers; then
        # sudoers file doesn't define Option ignore_dot
        echo "Defaults ignore_dot" >> /etc/sudoers
    fi
    
    # Check validity of sudoers and cleanup bak
    if /usr/sbin/visudo -qcf /etc/sudoers; then
        rm -f /etc/sudoers.bak
    else
        echo "Fail to validate remediated /etc/sudoers, reverting to original file."
        mv /etc/sudoers.bak /etc/sudoers
        false
    fi
else
    echo "Skipping remediation, /etc/sudoers failed to validate"
    false
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sudo_add_ignore_dot'

###############################################################################
# BEGIN fix (21 / 229) for 'xccdf_org.ssgproject.content_rule_sudo_add_noexec'
###############################################################################
(>&2 echo "Remediating rule 21/229: 'xccdf_org.ssgproject.content_rule_sudo_add_noexec'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if /usr/sbin/visudo -qcf /etc/sudoers; then
    cp /etc/sudoers /etc/sudoers.bak
    if ! grep -P '^[\s]*Defaults\b[^!\n]*\bnoexec.*$' /etc/sudoers; then
        # sudoers file doesn't define Option noexec
        echo "Defaults noexec" >> /etc/sudoers
    fi
    
    # Check validity of sudoers and cleanup bak
    if /usr/sbin/visudo -qcf /etc/sudoers; then
        rm -f /etc/sudoers.bak
    else
        echo "Fail to validate remediated /etc/sudoers, reverting to original file."
        mv /etc/sudoers.bak /etc/sudoers
        false
    fi
else
    echo "Skipping remediation, /etc/sudoers failed to validate"
    false
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sudo_add_noexec'

###############################################################################
# BEGIN fix (22 / 229) for 'xccdf_org.ssgproject.content_rule_sudo_add_requiretty'
###############################################################################
(>&2 echo "Remediating rule 22/229: 'xccdf_org.ssgproject.content_rule_sudo_add_requiretty'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if /usr/sbin/visudo -qcf /etc/sudoers; then
    cp /etc/sudoers /etc/sudoers.bak
    if ! grep -P '^[\s]*Defaults\b[^!\n]*\brequiretty.*$' /etc/sudoers; then
        # sudoers file doesn't define Option requiretty
        echo "Defaults requiretty" >> /etc/sudoers
    fi
    
    # Check validity of sudoers and cleanup bak
    if /usr/sbin/visudo -qcf /etc/sudoers; then
        rm -f /etc/sudoers.bak
    else
        echo "Fail to validate remediated /etc/sudoers, reverting to original file."
        mv /etc/sudoers.bak /etc/sudoers
        false
    fi
else
    echo "Skipping remediation, /etc/sudoers failed to validate"
    false
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sudo_add_requiretty'

###############################################################################
# BEGIN fix (23 / 229) for 'xccdf_org.ssgproject.content_rule_sudo_add_umask'
###############################################################################
(>&2 echo "Remediating rule 23/229: 'xccdf_org.ssgproject.content_rule_sudo_add_umask'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

var_sudo_umask='0077'


if /usr/sbin/visudo -qcf /etc/sudoers; then
    cp /etc/sudoers /etc/sudoers.bak
    if ! grep -P '^[\s]*Defaults\b[^!\n]*\bumask=\w+\b.*$' /etc/sudoers; then
        # sudoers file doesn't define Option umask
        echo "Defaults umask=${var_sudo_umask}" >> /etc/sudoers
    else
        # sudoers file defines Option umask, remediate if appropriate value is not set
        if ! grep -P "^[\s]*Defaults.*\bumask=${var_sudo_umask}\b.*$" /etc/sudoers; then
            
            escaped_variable=${var_sudo_umask//$'/'/$'\/'}
            sed -Ei "s/(^[\s]*Defaults.*\bumask=)[-]?.+(\b.*$)/\1$escaped_variable\2/" /etc/sudoers
        fi
    fi
    
    # Check validity of sudoers and cleanup bak
    if /usr/sbin/visudo -qcf /etc/sudoers; then
        rm -f /etc/sudoers.bak
    else
        echo "Fail to validate remediated /etc/sudoers, reverting to original file."
        mv /etc/sudoers.bak /etc/sudoers
        false
    fi
else
    echo "Skipping remediation, /etc/sudoers failed to validate"
    false
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sudo_add_umask'

###############################################################################
# BEGIN fix (24 / 229) for 'xccdf_org.ssgproject.content_rule_sudo_add_use_pty'
###############################################################################
(>&2 echo "Remediating rule 24/229: 'xccdf_org.ssgproject.content_rule_sudo_add_use_pty'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q sudo; }; then

if /usr/sbin/visudo -qcf /etc/sudoers; then
    cp /etc/sudoers /etc/sudoers.bak
    if ! grep -P '^[\s]*Defaults\b[^!\n]*\buse_pty.*$' /etc/sudoers; then
        # sudoers file doesn't define Option use_pty
        echo "Defaults use_pty" >> /etc/sudoers
    fi
    
    # Check validity of sudoers and cleanup bak
    if /usr/sbin/visudo -qcf /etc/sudoers; then
        rm -f /etc/sudoers.bak
    else
        echo "Fail to validate remediated /etc/sudoers, reverting to original file."
        mv /etc/sudoers.bak /etc/sudoers
        false
    fi
else
    echo "Skipping remediation, /etc/sudoers failed to validate"
    false
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sudo_add_use_pty'

###############################################################################
# BEGIN fix (25 / 229) for 'xccdf_org.ssgproject.content_rule_sudoers_explicit_command_args'
###############################################################################
(>&2 echo "Remediating rule 25/229: 'xccdf_org.ssgproject.content_rule_sudoers_explicit_command_args'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_sudoers_explicit_command_args' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_sudoers_explicit_command_args'

###############################################################################
# BEGIN fix (26 / 229) for 'xccdf_org.ssgproject.content_rule_sudoers_no_command_negation'
###############################################################################
(>&2 echo "Remediating rule 26/229: 'xccdf_org.ssgproject.content_rule_sudoers_no_command_negation'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_sudoers_no_command_negation' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_sudoers_no_command_negation'

###############################################################################
# BEGIN fix (27 / 229) for 'xccdf_org.ssgproject.content_rule_sudoers_no_root_target'
###############################################################################
(>&2 echo "Remediating rule 27/229: 'xccdf_org.ssgproject.content_rule_sudoers_no_root_target'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_sudoers_no_root_target' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_sudoers_no_root_target'

###############################################################################
# BEGIN fix (28 / 229) for 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_globally_activated'
###############################################################################
(>&2 echo "Remediating rule 28/229: 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_globally_activated'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q yum; then

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^gpgcheck")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^gpgcheck\\>" "/etc/yum.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^gpgcheck\\>.*/$escaped_formatted_output/gi" "/etc/yum.conf"
else
    if [[ -s "/etc/yum.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/yum.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/yum.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/yum.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_globally_activated'

###############################################################################
# BEGIN fix (29 / 229) for 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_local_packages'
###############################################################################
(>&2 echo "Remediating rule 29/229: 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_local_packages'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q yum; then

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^localpkg_gpgcheck")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^localpkg_gpgcheck\\>" "/etc/yum.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^localpkg_gpgcheck\\>.*/$escaped_formatted_output/gi" "/etc/yum.conf"
else
    if [[ -s "/etc/yum.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/yum.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/yum.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/yum.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_local_packages'

###############################################################################
# BEGIN fix (30 / 229) for 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_never_disabled'
###############################################################################
(>&2 echo "Remediating rule 30/229: 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_never_disabled'")

sed -i 's/gpgcheck\s*=.*/gpgcheck=1/g' /etc/yum.repos.d/*

# END fix for 'xccdf_org.ssgproject.content_rule_ensure_gpgcheck_never_disabled'

###############################################################################
# BEGIN fix (31 / 229) for 'xccdf_org.ssgproject.content_rule_ensure_oracle_gpgkey_installed'
###############################################################################
(>&2 echo "Remediating rule 31/229: 'xccdf_org.ssgproject.content_rule_ensure_oracle_gpgkey_installed'")
# OL fingerprints below retrieved from: https://linux.oracle.com/security/gpg/#gpg
readonly OL_RELEASE_FINGERPRINT="42144123FECFC55B9086313D72F97B74EC551F03"
readonly OL_AUXILIARY_FINGERPRINT=""

FINGERPRINTS_REGEX="${OL_RELEASE_FINGERPRINT}"

if [[ -n "$OL_AUXILIARY_FINGERPRINT" ]]; then
    FINGERPRINTS_REGEX+="|${OL_AUXILIARY_FINGERPRINT}"
fi

# Location of the key we would like to import (once it's integrity verified)
readonly OL_RELEASE_KEY="/etc/pki/rpm-gpg/RPM-GPG-KEY-oracle"

RPM_GPG_DIR_PERMS=$(stat -c %a "$(dirname "$OL_RELEASE_KEY")")

# Verify /etc/pki/rpm-gpg directory permissions are safe
if [ "${RPM_GPG_DIR_PERMS}" -le "755" ]
then
  # If they are safe, try to obtain fingerprints from the key file
  # (to ensure there won't be e.g. CRC error)
  
    readarray -t GPG_OUT < <(gpg --with-fingerprint --with-colons "$OL_RELEASE_KEY" | grep "^fpr" | cut -d ":" -f 10)
  

  GPG_RESULT=$?
  # No CRC error, safe to proceed
  if [ "${GPG_RESULT}" -eq "0" ]
  then
    # Filter just hexadecimal fingerprints from gpg's output from
    # processing of a key file
    echo "${GPG_OUT[*]}" | grep -vE "$FINGERPRINTS_REGEX" || {
      # If $ OL_RELEASE_KEY file doesn't contain any keys with unknown fingerprint, import it
      rpm --import "${OL_RELEASE_KEY}"
    }
  fi
fi

# END fix for 'xccdf_org.ssgproject.content_rule_ensure_oracle_gpgkey_installed'

###############################################################################
# BEGIN fix (32 / 229) for 'xccdf_org.ssgproject.content_rule_security_patches_up_to_date'
###############################################################################
(>&2 echo "Remediating rule 32/229: 'xccdf_org.ssgproject.content_rule_security_patches_up_to_date'")


yum -y update

# END fix for 'xccdf_org.ssgproject.content_rule_security_patches_up_to_date'

###############################################################################
# BEGIN fix (33 / 229) for 'xccdf_org.ssgproject.content_rule_enable_pam_namespace'
###############################################################################
(>&2 echo "Remediating rule 33/229: 'xccdf_org.ssgproject.content_rule_enable_pam_namespace'")
# Remediation is applicable only in certain platforms
if ( ( rpm --quiet -q pam && rpm --quiet -q kernel || rpm --quiet -q kernel-uek ) ); then

if ! grep -Eq '^\s*session\s+required\s+pam_namespace.so\s*$' '/etc/pam.d/login' ; then
    echo "session    required     pam_namespace.so" >> "/etc/pam.d/login"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_enable_pam_namespace'

###############################################################################
# BEGIN fix (34 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_remember'
###############################################################################
(>&2 echo "Remediating rule 34/229: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_remember'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q libpwquality; }; then

var_password_pam_unix_remember='2'






if [ -f /usr/bin/authselect ]; then
    if authselect list-features sssd | grep -q with-pwhistory; then
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi
        authselect enable-feature with-pwhistory

        authselect apply-changes -b
    else
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
        
        if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*" "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1requisite \2/" "$PAM_FILE_PATH"
            else
                LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                if [ ! -z $LAST_MATCH_LINE ]; then
                    sed -i --follow-symlinks $LAST_MATCH_LINE" a password     requisite    pam_pwhistory.so" "$PAM_FILE_PATH"
                else
                    echo "password    requisite    pam_pwhistory.so" >> "$PAM_FILE_PATH"
                fi
            fi
        fi
    fi
else

    
    if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*" "/etc/pam.d/system-auth"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "/etc/pam.d/system-auth")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1requisite \2/" "/etc/pam.d/system-auth"
        else
            LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "/etc/pam.d/system-auth" | tail -n 1 | cut -d: -f 1)
            if [ ! -z $LAST_MATCH_LINE ]; then
                sed -i --follow-symlinks $LAST_MATCH_LINE" a password     requisite    pam_pwhistory.so" "/etc/pam.d/system-auth"
            else
                echo "password    requisite    pam_pwhistory.so" >> "/etc/pam.d/system-auth"
            fi
        fi
    fi

fi

PWHISTORY_CONF="/etc/security/pwhistory.conf"
if [ -f $PWHISTORY_CONF ]; then
    regex="^\s*remember\s*="
    line="remember = $var_password_pam_unix_remember"
    if ! grep -q $regex $PWHISTORY_CONF; then
        echo $line >> $PWHISTORY_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(remember\s*=\s*\)\(\S\+\)|\1'"$var_password_pam_unix_remember"'|g' $PWHISTORY_CONF
    fi
    if [ -e "/etc/pam.d/system-auth" ] ; then
        PAM_FILE_PATH="/etc/pam.d/system-auth"
        if [ -f /usr/bin/authselect ]; then
            
            if ! authselect check; then
            echo "
            authselect integrity check failed. Remediation aborted!
            This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
            It is not recommended to manually edit the PAM files when authselect tool is available.
            In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
            exit 1
            fi

            CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
            # If not already in use, a custom profile is created preserving the enabled features.
            if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                # The "local" profile does not contain essential security features required by multiple Benchmarks.
                # If currently used, it is replaced by "sssd", which is the best option in this case.
                if [[ $CURRENT_PROFILE == local ]]; then
                    CURRENT_PROFILE="sssd"
                fi
                authselect create-profile hardening -b $CURRENT_PROFILE
                CURRENT_PROFILE="custom/hardening"
                
                authselect apply-changes -b --backup=before-hardening-custom-profile
                authselect select $CURRENT_PROFILE
                for feature in $ENABLED_FEATURES; do
                    authselect enable-feature $feature;
                done
                
                authselect apply-changes -b --backup=after-hardening-custom-profile
            fi
            PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
            PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

            authselect apply-changes -b
        fi
        
    if grep -qP "^\s*password\s.*\bpam_pwhistory.so\s.*\bremember\b" "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks "s/(.*password.*pam_pwhistory.so.*)\bremember\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
    fi
        if [ -f /usr/bin/authselect ]; then
            
            authselect apply-changes -b
        fi
    else
        echo "/etc/pam.d/system-auth was not found" >&2
    fi
else
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    

    if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*" "$PAM_FILE_PATH"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1requisite \2/" "$PAM_FILE_PATH"
        else
            echo "password    requisite    pam_pwhistory.so" >> "$PAM_FILE_PATH"
        fi
    fi
    # Check the option
    if ! grep -qP "^\s*password\s+requisite\s+pam_pwhistory.so\s*.*\sremember\b" "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks "/\s*password\s+requisite\s+pam_pwhistory.so.*/ s/$/ remember=$var_password_pam_unix_remember/" "$PAM_FILE_PATH"
    else
        sed -i -E --follow-symlinks "s/(\s*password\s+requisite\s+pam_pwhistory.so\s+.*)(remember=)[[:alnum:]]*\s*(.*)/\1\2$var_password_pam_unix_remember \3/" "$PAM_FILE_PATH"
    fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_remember'

###############################################################################
# BEGIN fix (35 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny'
###############################################################################
(>&2 echo "Remediating rule 35/229: 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q pam; }; then

var_accounts_passwords_pam_faillock_deny='3'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
SKIP_FAILLOCK_CHECK=false

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ] || [ "$SKIP_FAILLOCK_CHECK" = "true" ]; then
    regex="^\s*deny\s*="
    line="deny = $var_accounts_passwords_pam_faillock_deny"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(deny\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_deny"'|g' $FAILLOCK_CONF
    fi
    
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    # The "local" profile does not contain essential security features required by multiple Benchmarks.
                    # If currently used, it is replaced by "sssd", which is the best option in this case.
                    if [[ $CURRENT_PROFILE == local ]]; then
                        CURRENT_PROFILE="sssd"
                    fi
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP "^\s*auth\s.*\bpam_faillock.so\s.*\bdeny\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "s/(.*auth.*pam_faillock.so.*)\bdeny\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
    
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so\s+(preauth|authfail).*deny' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*/ s/$/ deny='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ deny='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*\)\('"deny"'=\)\S\+\b\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_deny"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"deny"'=\)\S\+\b\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_deny"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny'

###############################################################################
# BEGIN fix (36 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny_root'
###############################################################################
(>&2 echo "Remediating rule 36/229: 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny_root'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q pam; }; then

if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
SKIP_FAILLOCK_CHECK=false

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ] || [ "$SKIP_FAILLOCK_CHECK" = "true" ]; then
    regex="^\s*even_deny_root"
    line="even_deny_root"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    fi
    
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    # The "local" profile does not contain essential security features required by multiple Benchmarks.
                    # If currently used, it is replaced by "sssd", which is the best option in this case.
                    if [[ $CURRENT_PROFILE == local ]]; then
                        CURRENT_PROFILE="sssd"
                    fi
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP "^\s*auth\s.*\bpam_faillock.so\s.*\beven_deny_root\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "s/(.*auth.*pam_faillock.so.*)\beven_deny_root\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
    
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so\s+(preauth|authfail).*even_deny_root' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*/ s/$/ even_deny_root/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ even_deny_root/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny_root'

###############################################################################
# BEGIN fix (37 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_interval'
###############################################################################
(>&2 echo "Remediating rule 37/229: 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_interval'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q pam; }; then

var_accounts_passwords_pam_faillock_fail_interval='900'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
SKIP_FAILLOCK_CHECK=false

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ] || [ "$SKIP_FAILLOCK_CHECK" = "true" ]; then
    regex="^\s*fail_interval\s*="
    line="fail_interval = $var_accounts_passwords_pam_faillock_fail_interval"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(fail_interval\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_fail_interval"'|g' $FAILLOCK_CONF
    fi
    
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    # The "local" profile does not contain essential security features required by multiple Benchmarks.
                    # If currently used, it is replaced by "sssd", which is the best option in this case.
                    if [[ $CURRENT_PROFILE == local ]]; then
                        CURRENT_PROFILE="sssd"
                    fi
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP "^\s*auth\s.*\bpam_faillock.so\s.*\bfail_interval\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "s/(.*auth.*pam_faillock.so.*)\bfail_interval\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
    
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so\s+(preauth|authfail).*fail_interval' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*/ s/$/ fail_interval='"$var_accounts_passwords_pam_faillock_fail_interval"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ fail_interval='"$var_accounts_passwords_pam_faillock_fail_interval"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*\)\('"fail_interval"'=\)\S\+\b\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_fail_interval"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"fail_interval"'=\)\S\+\b\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_fail_interval"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_interval'

###############################################################################
# BEGIN fix (38 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_unlock_time'
###############################################################################
(>&2 echo "Remediating rule 38/229: 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_unlock_time'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q pam; }; then

var_accounts_passwords_pam_faillock_unlock_time='900'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
SKIP_FAILLOCK_CHECK=false

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ] || [ "$SKIP_FAILLOCK_CHECK" = "true" ]; then
    regex="^\s*unlock_time\s*="
    line="unlock_time = $var_accounts_passwords_pam_faillock_unlock_time"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(unlock_time\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_unlock_time"'|g' $FAILLOCK_CONF
    fi
    
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    # The "local" profile does not contain essential security features required by multiple Benchmarks.
                    # If currently used, it is replaced by "sssd", which is the best option in this case.
                    if [[ $CURRENT_PROFILE == local ]]; then
                        CURRENT_PROFILE="sssd"
                    fi
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP "^\s*auth\s.*\bpam_faillock.so\s.*\bunlock_time\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "s/(.*auth.*pam_faillock.so.*)\bunlock_time\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
    
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so\s+(preauth|authfail).*unlock_time' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*/ s/$/ unlock_time='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ unlock_time='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*\)\('"unlock_time"'=\)\S\+\b\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"unlock_time"'=\)\S\+\b\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_unlock_time'

###############################################################################
# BEGIN fix (39 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_dcredit'
###############################################################################
(>&2 echo "Remediating rule 39/229: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_dcredit'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q libpwquality; }; then

var_password_pam_dcredit='-1'



if grep -sq dcredit /etc/security/pwquality.conf.d/*.conf ; then
    sed -i "/dcredit/d" /etc/security/pwquality.conf.d/*.conf
fi



if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bdcredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bdcredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi
if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bdcredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bdcredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^dcredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_dcredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^dcredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^dcredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_dcredit'

###############################################################################
# BEGIN fix (40 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_lcredit'
###############################################################################
(>&2 echo "Remediating rule 40/229: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_lcredit'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q libpwquality; }; then

var_password_pam_lcredit='-1'



if grep -sq lcredit /etc/security/pwquality.conf.d/*.conf ; then
    sed -i "/lcredit/d" /etc/security/pwquality.conf.d/*.conf
fi



if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\blcredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\blcredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi
if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\blcredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\blcredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^lcredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_lcredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^lcredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^lcredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_lcredit'

###############################################################################
# BEGIN fix (41 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_minclass'
###############################################################################
(>&2 echo "Remediating rule 41/229: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_minclass'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q libpwquality; }; then

var_password_pam_minclass='4'



if grep -sq minclass /etc/security/pwquality.conf.d/*.conf ; then
    sed -i "/minclass/d" /etc/security/pwquality.conf.d/*.conf
fi



if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bminclass\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bminclass\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi
if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bminclass\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bminclass\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^minclass")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_minclass"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^minclass\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^minclass\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_minclass'

###############################################################################
# BEGIN fix (42 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_minlen'
###############################################################################
(>&2 echo "Remediating rule 42/229: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_minlen'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q libpwquality; }; then

var_password_pam_minlen='15'



if grep -sq minlen /etc/security/pwquality.conf.d/*.conf ; then
    sed -i "/minlen/d" /etc/security/pwquality.conf.d/*.conf
fi



if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bminlen\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bminlen\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi
if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bminlen\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bminlen\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^minlen")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_minlen"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^minlen\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^minlen\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_minlen'

###############################################################################
# BEGIN fix (43 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_ocredit'
###############################################################################
(>&2 echo "Remediating rule 43/229: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_ocredit'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q libpwquality; }; then

var_password_pam_ocredit='-1'



if grep -sq ocredit /etc/security/pwquality.conf.d/*.conf ; then
    sed -i "/ocredit/d" /etc/security/pwquality.conf.d/*.conf
fi



if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bocredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bocredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi
if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bocredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bocredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ocredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_ocredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ocredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^ocredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_ocredit'

###############################################################################
# BEGIN fix (44 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_retry'
###############################################################################
(>&2 echo "Remediating rule 44/229: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_retry'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q libpwquality; }; then

var_password_pam_retry='3'



	
		if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    

        if ! grep -qP "^\s*password\s+requisite\s+pam_pwquality.so\s*.*" "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwquality.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwquality.so.*)/\1requisite \2/" "$PAM_FILE_PATH"
            else
                LAST_MATCH_LINE=$(grep -nP "^\s*account" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                if [ ! -z $LAST_MATCH_LINE ]; then
                    sed -i --follow-symlinks $LAST_MATCH_LINE" a password     requisite    pam_pwquality.so" "$PAM_FILE_PATH"
                else
                    echo "password    requisite    pam_pwquality.so" >> "$PAM_FILE_PATH"
                fi
            fi
        fi
        # Check the option
        if ! grep -qP "^\s*password\s+requisite\s+pam_pwquality.so\s*.*\sretry\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "/\s*password\s+requisite\s+pam_pwquality.so.*/ s/$/ retry=$var_password_pam_retry/" "$PAM_FILE_PATH"
        else
            sed -i -E --follow-symlinks "s/(\s*password\s+requisite\s+pam_pwquality.so\s+.*)(retry=)[[:alnum:]]*\s*(.*)/\1\2$var_password_pam_retry \3/" "$PAM_FILE_PATH"
        fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi
	
		if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    

        if ! grep -qP "^\s*password\s+requisite\s+pam_pwquality.so\s*.*" "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwquality.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_pwquality.so.*)/\1requisite \2/" "$PAM_FILE_PATH"
            else
                LAST_MATCH_LINE=$(grep -nP "^\s*account" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                if [ ! -z $LAST_MATCH_LINE ]; then
                    sed -i --follow-symlinks $LAST_MATCH_LINE" a password     requisite    pam_pwquality.so" "$PAM_FILE_PATH"
                else
                    echo "password    requisite    pam_pwquality.so" >> "$PAM_FILE_PATH"
                fi
            fi
        fi
        # Check the option
        if ! grep -qP "^\s*password\s+requisite\s+pam_pwquality.so\s*.*\sretry\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "/\s*password\s+requisite\s+pam_pwquality.so.*/ s/$/ retry=$var_password_pam_retry/" "$PAM_FILE_PATH"
        else
            sed -i -E --follow-symlinks "s/(\s*password\s+requisite\s+pam_pwquality.so\s+.*)(retry=)[[:alnum:]]*\s*(.*)/\1\2$var_password_pam_retry \3/" "$PAM_FILE_PATH"
        fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_retry'

###############################################################################
# BEGIN fix (45 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_ucredit'
###############################################################################
(>&2 echo "Remediating rule 45/229: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_ucredit'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q libpwquality; }; then

var_password_pam_ucredit='-1'



if grep -sq ucredit /etc/security/pwquality.conf.d/*.conf ; then
    sed -i "/ucredit/d" /etc/security/pwquality.conf.d/*.conf
fi



if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bucredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bucredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi
if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s.*\bpam_pwquality.so\s.*\bucredit\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*pam_pwquality.so.*)\bucredit\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ucredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_ucredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ucredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^ucredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_ucredit'

###############################################################################
# BEGIN fix (46 / 229) for 'xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_systemauth'
###############################################################################
(>&2 echo "Remediating rule 46/229: 'xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_systemauth'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q pam; }; then

var_password_hashing_algorithm_pam='sha512'


# Allow multiple algorithms, but choose the first one for remediation
var_password_hashing_algorithm_pam="$(echo $var_password_hashing_algorithm_pam | cut -d \| -f 1)"

PAM_FILE_PATH="/etc/pam.d/system-auth"


# Ensure all the hashing algorithm option is removed.
declare -a HASHING_ALGORITHMS_OPTIONS=("sha512" "yescrypt" "gost_yescrypt" "blowfish" "sha256" "md5" "bigcrypt")

for hash_option in "${HASHING_ALGORITHMS_OPTIONS[@]}"; do
  if grep -qP "^\s*password\s+.*\s+pam_unix.so\s+.*\b$hash_option\b" "$PAM_FILE_PATH"; then
    if [ -e "$PAM_FILE_PATH" ] ; then
    PAM_FILE_PATH="$PAM_FILE_PATH"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "$PAM_FILE_PATH")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    
if grep -qP "^\s*password\s+.*\s+pam_unix.so\s.*\b$hash_option\b" "$PAM_FILE_PATH"; then
    sed -i -E --follow-symlinks "s/(.*password.*.*.*pam_unix.so.*)\b$hash_option\b=?[[:alnum:]]*(.*)/\1\2/g" "$PAM_FILE_PATH"
fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "$PAM_FILE_PATH was not found" >&2
fi
  fi
done

if [ -e "$PAM_FILE_PATH" ] ; then
    PAM_FILE_PATH="$PAM_FILE_PATH"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "$PAM_FILE_PATH")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    

        if ! grep -qP "^\s*password\s+sufficient\s+pam_unix.so\s*.*" "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_unix.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_unix.so.*)/\1sufficient \2/" "$PAM_FILE_PATH"
            else
                echo "password    sufficient    pam_unix.so" >> "$PAM_FILE_PATH"
            fi
        fi
        # Check the option
        if ! grep -qP "^\s*password\s+sufficient\s+pam_unix.so\s*.*\s$var_password_hashing_algorithm_pam\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "/\s*password\s+sufficient\s+pam_unix.so.*/ s/$/ $var_password_hashing_algorithm_pam/" "$PAM_FILE_PATH"
        fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "$PAM_FILE_PATH was not found" >&2
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_systemauth'

###############################################################################
# BEGIN fix (47 / 229) for 'xccdf_org.ssgproject.content_rule_logind_session_timeout'
###############################################################################
(>&2 echo "Remediating rule 47/229: 'xccdf_org.ssgproject.content_rule_logind_session_timeout'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { ( ( grep -qP "^ID=[\"']?rhel[\"']?$" "/etc/os-release" && { real="$(grep -P "^VERSION_ID=[\"']?[\w.]+[\"']?$" /etc/os-release | sed "s/^VERSION_ID=[\"']\?\([^\"']\+\)[\"']\?$/\1/")"; expected="8.7"; printf "%s\n%s" "$expected" "$real" | sort -VC; } && grep -qP "^ID=[\"']?rhel[\"']?$" "/etc/os-release" && { real="$(grep -P "^VERSION_ID=[\"']?[\w.]+[\"']?$" /etc/os-release | sed "s/^VERSION_ID=[\"']\?\([^\"']\+\)[\"']\?$/\1/")"; expected="9.0"; [[ "$real" != "$expected" ]]; } ) ) || ( grep -qP "^ID=[\"']?ol[\"']?$" "/etc/os-release" && { real="$(grep -P "^VERSION_ID=[\"']?[\w.]+[\"']?$" /etc/os-release | sed "s/^VERSION_ID=[\"']\?\([^\"']\+\)[\"']\?$/\1/")"; expected="8.7"; printf "%s\n%s" "$expected" "$real" | sort -VC; } ) || ( grep -qP "^ID=[\"']?sles[\"']?$" "/etc/os-release" && { real="$(grep -P "^VERSION_ID=[\"']?[\w.]+[\"']?$" /etc/os-release | sed "s/^VERSION_ID=[\"']\?\([^\"']\+\)[\"']\?$/\1/")"; expected="15"; printf "%s\n%s" "$expected" "$real" | sort -VC; } ); }; then

var_logind_session_timeout='600'








# Try find '[Login]' and 'StopIdleSessionSec' in '/etc/systemd/logind.conf', if it exists, set
# to '$var_logind_session_timeout', if it isn't here, add it, if '[Login]' doesn't exist, add it there
if grep -qzosP '[[:space:]]*\[Login]([^\n\[]*\n+)+?[[:space:]]*StopIdleSessionSec' '/etc/systemd/logind.conf'; then
    
    sed -i "s/StopIdleSessionSec[^(\n)]*/StopIdleSessionSec=$var_logind_session_timeout/" '/etc/systemd/logind.conf'
elif grep -qs '[[:space:]]*\[Login]' '/etc/systemd/logind.conf'; then
    sed -i "/[[:space:]]*\[Login]/a StopIdleSessionSec=$var_logind_session_timeout" '/etc/systemd/logind.conf'
else
    if test -d "/etc/systemd"; then
        printf '%s\n' '[Login]' "StopIdleSessionSec=$var_logind_session_timeout" >> '/etc/systemd/logind.conf'
    else
        echo "Config file directory '/etc/systemd' doesnt exist, not remediating, assuming non-applicability." >&2
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_logind_session_timeout'

###############################################################################
# BEGIN fix (48 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_password_minlen_login_defs'
###############################################################################
(>&2 echo "Remediating rule 48/229: 'xccdf_org.ssgproject.content_rule_accounts_password_minlen_login_defs'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q shadow-utils; }; then

var_accounts_password_minlen_login_defs='15'

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^PASS_MIN_LEN")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$var_accounts_password_minlen_login_defs"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^PASS_MIN_LEN\\>" "/etc/login.defs"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^PASS_MIN_LEN\\>.*/$escaped_formatted_output/gi" "/etc/login.defs"
else
    if [[ -s "/etc/login.defs" ]] && [[ -n "$(tail -c 1 -- "/etc/login.defs" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/login.defs"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/login.defs"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_minlen_login_defs'

###############################################################################
# BEGIN fix (49 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_password_set_max_life_root'
###############################################################################
(>&2 echo "Remediating rule 49/229: 'xccdf_org.ssgproject.content_rule_accounts_password_set_max_life_root'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_accounts_password_set_max_life_root' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_set_max_life_root'

###############################################################################
# BEGIN fix (50 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_rounds_password_auth'
###############################################################################
(>&2 echo "Remediating rule 50/229: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_rounds_password_auth'")
# Remediation is applicable only in certain platforms
if ( ( rpm --quiet -q pam && rpm --quiet -q kernel || rpm --quiet -q kernel-uek ) ); then

var_password_pam_unix_rounds='11'



if [ -e "/etc/pam.d/password-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    

        if ! grep -qP "^\s*password\s+sufficient\s+pam_unix.so\s*.*" "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_unix.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_unix.so.*)/\1sufficient \2/" "$PAM_FILE_PATH"
            else
                echo "password    sufficient    pam_unix.so" >> "$PAM_FILE_PATH"
            fi
        fi
        # Check the option
        if ! grep -qP "^\s*password\s+sufficient\s+pam_unix.so\s*.*\srounds\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "/\s*password\s+sufficient\s+pam_unix.so.*/ s/$/ rounds=$var_password_pam_unix_rounds/" "$PAM_FILE_PATH"
        else
            sed -i -E --follow-symlinks "s/(\s*password\s+sufficient\s+pam_unix.so\s+.*)(rounds=)[[:alnum:]]*\s*(.*)/\1\2$var_password_pam_unix_rounds \3/" "$PAM_FILE_PATH"
        fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/password-auth was not found" >&2
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_rounds_password_auth'

###############################################################################
# BEGIN fix (51 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_rounds_system_auth'
###############################################################################
(>&2 echo "Remediating rule 51/229: 'xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_rounds_system_auth'")
# Remediation is applicable only in certain platforms
if ( ( rpm --quiet -q pam && rpm --quiet -q kernel || rpm --quiet -q kernel-uek ) ); then

var_password_pam_unix_rounds='11'


if [ -e "/etc/pam.d/system-auth" ] ; then
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            # The "local" profile does not contain essential security features required by multiple Benchmarks.
            # If currently used, it is replaced by "sssd", which is the best option in this case.
            if [[ $CURRENT_PROFILE == local ]]; then
                CURRENT_PROFILE="sssd"
            fi
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    

        if ! grep -qP "^\s*password\s+sufficient\s+pam_unix.so\s*.*" "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_unix.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks "s/^(\s*password\s+).*(\bpam_unix.so.*)/\1sufficient \2/" "$PAM_FILE_PATH"
            else
                echo "password    sufficient    pam_unix.so" >> "$PAM_FILE_PATH"
            fi
        fi
        # Check the option
        if ! grep -qP "^\s*password\s+sufficient\s+pam_unix.so\s*.*\srounds\b" "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks "/\s*password\s+sufficient\s+pam_unix.so.*/ s/$/ rounds=$var_password_pam_unix_rounds/" "$PAM_FILE_PATH"
        else
            sed -i -E --follow-symlinks "s/(\s*password\s+sufficient\s+pam_unix.so\s+.*)(rounds=)[[:alnum:]]*\s*(.*)/\1\2$var_password_pam_unix_rounds \3/" "$PAM_FILE_PATH"
        fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
else
    echo "/etc/pam.d/system-auth was not found" >&2
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_rounds_system_auth'

###############################################################################
# BEGIN fix (52 / 229) for 'xccdf_org.ssgproject.content_rule_no_direct_root_logins'
###############################################################################
(>&2 echo "Remediating rule 52/229: 'xccdf_org.ssgproject.content_rule_no_direct_root_logins'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

echo > /etc/securetty

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_no_direct_root_logins'

###############################################################################
# BEGIN fix (53 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_polyinstantiated_tmp'
###############################################################################
(>&2 echo "Remediating rule 53/229: 'xccdf_org.ssgproject.content_rule_accounts_polyinstantiated_tmp'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# shellcheck disable=SC2174
mkdir -p --mode 000 /tmp/tmp-inst
chmod 000 /tmp/tmp-inst
chcon --reference=/tmp /tmp/tmp-inst

if ! grep -Eq '^\s*/tmp\s+/tmp/tmp-inst/\s+level\s+root,adm$' /etc/security/namespace.conf ; then
    if grep -Eq '^\s*/tmp\s+' /etc/security/namespace.conf ; then
        sed -i '/^\s*\/tmp/d' /etc/security/namespace.conf
    fi
    echo "/tmp     /tmp/tmp-inst/        level      root,adm" >> /etc/security/namespace.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_polyinstantiated_tmp'

###############################################################################
# BEGIN fix (54 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_polyinstantiated_var_tmp'
###############################################################################
(>&2 echo "Remediating rule 54/229: 'xccdf_org.ssgproject.content_rule_accounts_polyinstantiated_var_tmp'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# shellcheck disable=SC2174
mkdir -p --mode 000 /var/tmp/tmp-inst
chmod 000 /var/tmp/tmp-inst
chcon --reference=/var/tmp /var/tmp/tmp-inst

if ! grep -Eq '^\s*/var/tmp\s+/var/tmp/tmp-inst/\s+level\s+root,adm$' /etc/security/namespace.conf ; then
    if grep -Eq '^\s*/var/tmp\s+' /etc/security/namespace.conf ; then
        sed -i '/^\s*\/var\/tmp/d' /etc/security/namespace.conf
    fi
    echo "/var/tmp /var/tmp/tmp-inst/    level      root,adm" >> /etc/security/namespace.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_polyinstantiated_var_tmp'

###############################################################################
# BEGIN fix (55 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_tmout'
###############################################################################
(>&2 echo "Remediating rule 55/229: 'xccdf_org.ssgproject.content_rule_accounts_tmout'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

var_accounts_tmout='600'


# if 0, no occurrence of tmout found, if 1, occurrence found
tmout_found=0


for f in /etc/profile /etc/profile.d/*.sh /etc/bashrc; do

    if grep --silent '^[^#].*TMOUT' $f; then
        sed -i -E "s/^(.*)TMOUT\s*=\s*(\w|\$)*(.*)$/typeset -xr TMOUT=$var_accounts_tmout\3/g" $f
        tmout_found=1
    fi
done

if [ $tmout_found -eq 0 ]; then
        echo -e "\n# Set TMOUT to $var_accounts_tmout per security requirements" >> /etc/profile.d/tmout.sh
        echo "typeset -xr TMOUT=$var_accounts_tmout" >> /etc/profile.d/tmout.sh
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_tmout'

###############################################################################
# BEGIN fix (56 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_user_dot_group_ownership'
###############################################################################
(>&2 echo "Remediating rule 56/229: 'xccdf_org.ssgproject.content_rule_accounts_user_dot_group_ownership'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

awk -F: '{if ($4 >= 1000 && $4 != 65534) print $4":"$6}' /etc/passwd | while IFS=: read -r gid home; do find -P "$home" -maxdepth 1 -type f -name "\.[^.]*" -exec chgrp -f --no-dereference -- $gid "{}" \;; done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_user_dot_group_ownership'

###############################################################################
# BEGIN fix (57 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_user_dot_user_ownership'
###############################################################################
(>&2 echo "Remediating rule 57/229: 'xccdf_org.ssgproject.content_rule_accounts_user_dot_user_ownership'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

awk -F: '{if ($3 >= 1000 && $3 != 65534) print $3":"$6}' /etc/passwd | while IFS=: read -r uid home; do find -P "$home" -maxdepth 1 -type f -name "\.[^.]*" -exec chown -f --no-dereference -- $uid "{}" \;; done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_user_dot_user_ownership'

###############################################################################
# BEGIN fix (58 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_users_home_files_groupownership'
###############################################################################
(>&2 echo "Remediating rule 58/229: 'xccdf_org.ssgproject.content_rule_accounts_users_home_files_groupownership'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

for user in $(awk -F':' '{ if ($3 >= 1000 && $3 != 65534 && $6 != "/") print $1 }' /etc/passwd); do
    home_dir=$(getent passwd $user | cut -d: -f6)
    group=$(getent passwd $user | cut -d: -f4)
    # Only update the group-ownership when necessary. This will avoid changing the inode timestamp
    # when the group is already defined as expected, therefore not impacting in possible integrity
    # check systems that also check inodes timestamps.
    find $home_dir -not -group $group -exec chgrp -f --no-dereference $group {} \;
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_users_home_files_groupownership'

###############################################################################
# BEGIN fix (59 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_users_home_files_ownership'
###############################################################################
(>&2 echo "Remediating rule 59/229: 'xccdf_org.ssgproject.content_rule_accounts_users_home_files_ownership'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

for user in $(awk -F':' '{ if ($3 >= 1000 && $3 != 65534 && $6 != "/") print $1 }' /etc/passwd); do
    home_dir=$(getent passwd $user | cut -d: -f6)
    # Only update the ownership when necessary. This will avoid changing the inode timestamp
    # when the owner is already defined as expected, therefore not impacting in possible integrity
    # check systems that also check inodes timestamps.
    find $home_dir -not -user $user -exec chown -f --no-dereference $user {} \;
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_users_home_files_ownership'

###############################################################################
# BEGIN fix (60 / 229) for 'xccdf_org.ssgproject.content_rule_accounts_users_home_files_permissions'
###############################################################################
(>&2 echo "Remediating rule 60/229: 'xccdf_org.ssgproject.content_rule_accounts_users_home_files_permissions'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

for home_dir in $(awk -F':' '{ if ($3 >= 1000 && $3 != 65534 && $6 != "/") print $6 }' /etc/passwd); do
    # Only update the permissions when necessary. This will avoid changing the inode timestamp when
    # the permission is already defined as expected, therefore not impacting in possible integrity
    # check systems that also check inodes timestamps.
    find "$home_dir" -perm /7027 \! -type l -exec chmod u-s,g-w-s,o=- {} \;
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_accounts_users_home_files_permissions'

###############################################################################
# BEGIN fix (61 / 229) for 'xccdf_org.ssgproject.content_rule_file_permission_user_init_files'
###############################################################################
(>&2 echo "Remediating rule 61/229: 'xccdf_org.ssgproject.content_rule_file_permission_user_init_files'")

var_user_initialization_files_regex='^(\.bashrc|\.zshrc|\.cshrc|\.profile|\.bash_login|\.bash_profile)$'


readarray -t interactive_users < <(awk -F: '$3>=1000   {print $1}' /etc/passwd)
readarray -t interactive_users_home < <(awk -F: '$3>=1000   {print $6}' /etc/passwd)
readarray -t interactive_users_shell < <(awk -F: '$3>=1000   {print $7}' /etc/passwd)

USERS_IGNORED_REGEX='nobody|nfsnobody'

for (( i=0; i<"${#interactive_users[@]}"; i++ )); do
    if ! grep -qP "$USERS_IGNORED_REGEX" <<< "${interactive_users[$i]}" && \
        [ "${interactive_users_shell[$i]}" != "/sbin/nologin" ]; then
        
        readarray -t init_files < <(find "${interactive_users_home[$i]}" -maxdepth 1 \
            -exec basename {} \; | grep -P "$var_user_initialization_files_regex")
        for file in "${init_files[@]}"; do
            chmod u-s,g-wxs,o= "${interactive_users_home[$i]}/$file"
        done
    fi
done

# END fix for 'xccdf_org.ssgproject.content_rule_file_permission_user_init_files'

###############################################################################
# BEGIN fix (62 / 229) for 'xccdf_org.ssgproject.content_rule_grub2_l1tf_argument'
###############################################################################
(>&2 echo "Remediating rule 62/229: 'xccdf_org.ssgproject.content_rule_grub2_l1tf_argument'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q grub2-common && rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

var_l1tf_options='full,force'



if { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    KARGS_DIR="/usr/lib/bootc/kargs.d/"
    if grep -q -E "l1tf" "$KARGS_DIR/*.toml" ; then
        sed -i -E "s/^(\s*kargs\s*=\s*\[.*)\"l1tf=[^\"]*\"(.*]\s*)/\1\"l1tf=$var_l1tf_options\"\2/" "$KARGS_DIR/*.toml"
    else
        echo "kargs = [\"l1tf=$var_l1tf_options\"]" >> "$KARGS_DIR/10-l1tf.toml"
    fi
else


    # Correct the form of default kernel command line in GRUB
    if grep -q '^\s*GRUB_CMDLINE_LINUX=.*l1tf=.*"'  '/etc/default/grub' ; then
           # modify the GRUB command-line if an l1tf= arg already exists
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)l1tf=[^[:space:]]\+\(.*\"\)/\1l1tf=$var_l1tf_options\2/"  '/etc/default/grub'
    # Add to already existing GRUB_CMDLINE_LINUX parameters
    elif grep -q '^\s*GRUB_CMDLINE_LINUX='  '/etc/default/grub' ; then
           # no l1tf=arg is present, append it
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)\"/\1 l1tf=$var_l1tf_options\"/"  '/etc/default/grub'
    # Add GRUB_CMDLINE_LINUX parameters line
    else
           echo "GRUB_CMDLINE_LINUX=\"l1tf=$var_l1tf_options\"" >> '/etc/default/grub'
    fi
    grubby --update-kernel=ALL --args=l1tf=$var_l1tf_options

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_grub2_l1tf_argument'

###############################################################################
# BEGIN fix (63 / 229) for 'xccdf_org.ssgproject.content_rule_grub2_mce_argument'
###############################################################################
(>&2 echo "Remediating rule 63/229: 'xccdf_org.ssgproject.content_rule_grub2_mce_argument'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q grub2-common && rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

if { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    KARGS_DIR="/usr/lib/bootc/kargs.d/"
    if grep -q -E "mce" "$KARGS_DIR/*.toml" ; then
        sed -i -E "s/^(\s*kargs\s*=\s*\[.*)\"mce=[^\"]*\"(.*]\s*)/\1\"mce=0\"\2/" "$KARGS_DIR/*.toml"
    else
        echo "kargs = [\"mce=0\"]" >> "$KARGS_DIR/10-mce.toml"
    fi
else


    # Correct the form of default kernel command line in GRUB
    if grep -q '^\s*GRUB_CMDLINE_LINUX=.*mce=.*"'  '/etc/default/grub' ; then
           # modify the GRUB command-line if an mce= arg already exists
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)mce=[^[:space:]]\+\(.*\"\)/\1mce=0\2/"  '/etc/default/grub'
    # Add to already existing GRUB_CMDLINE_LINUX parameters
    elif grep -q '^\s*GRUB_CMDLINE_LINUX='  '/etc/default/grub' ; then
           # no mce=arg is present, append it
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)\"/\1 mce=0\"/"  '/etc/default/grub'
    # Add GRUB_CMDLINE_LINUX parameters line
    else
           echo "GRUB_CMDLINE_LINUX=\"mce=0\"" >> '/etc/default/grub'
    fi
    grubby --update-kernel=ALL --args=mce=0

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_grub2_mce_argument'

###############################################################################
# BEGIN fix (64 / 229) for 'xccdf_org.ssgproject.content_rule_grub2_rng_core_default_quality_argument'
###############################################################################
(>&2 echo "Remediating rule 64/229: 'xccdf_org.ssgproject.content_rule_grub2_rng_core_default_quality_argument'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q grub2-common && rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

var_rng_core_default_quality='500'



if { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    KARGS_DIR="/usr/lib/bootc/kargs.d/"
    if grep -q -E "rng_core.default_quality" "$KARGS_DIR/*.toml" ; then
        sed -i -E "s/^(\s*kargs\s*=\s*\[.*)\"rng_core.default_quality=[^\"]*\"(.*]\s*)/\1\"rng_core.default_quality=$var_rng_core_default_quality\"\2/" "$KARGS_DIR/*.toml"
    else
        echo "kargs = [\"rng_core.default_quality=$var_rng_core_default_quality\"]" >> "$KARGS_DIR/10-rng_core_default_quality.toml"
    fi
else


    # Correct the form of default kernel command line in GRUB
    if grep -q '^\s*GRUB_CMDLINE_LINUX=.*rng_core.default_quality=.*"'  '/etc/default/grub' ; then
           # modify the GRUB command-line if an rng_core.default_quality= arg already exists
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)rng_core.default_quality=[^[:space:]]\+\(.*\"\)/\1rng_core.default_quality=$var_rng_core_default_quality\2/"  '/etc/default/grub'
    # Add to already existing GRUB_CMDLINE_LINUX parameters
    elif grep -q '^\s*GRUB_CMDLINE_LINUX='  '/etc/default/grub' ; then
           # no rng_core.default_quality=arg is present, append it
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)\"/\1 rng_core.default_quality=$var_rng_core_default_quality\"/"  '/etc/default/grub'
    # Add GRUB_CMDLINE_LINUX parameters line
    else
           echo "GRUB_CMDLINE_LINUX=\"rng_core.default_quality=$var_rng_core_default_quality\"" >> '/etc/default/grub'
    fi
    grubby --update-kernel=ALL --args=rng_core.default_quality=$var_rng_core_default_quality

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_grub2_rng_core_default_quality_argument'

###############################################################################
# BEGIN fix (65 / 229) for 'xccdf_org.ssgproject.content_rule_grub2_slab_nomerge_argument'
###############################################################################
(>&2 echo "Remediating rule 65/229: 'xccdf_org.ssgproject.content_rule_grub2_slab_nomerge_argument'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q grub2-common && rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

if { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    KARGS_DIR="/usr/lib/bootc/kargs.d/"
    if grep -q -E "slab_nomerge" "$KARGS_DIR/*.toml" ; then
        sed -i -E "s/^(\s*kargs\s*=\s*\[.*)\"slab_nomerge=[^\"]*\"(.*]\s*)/\1\"slab_nomerge=yes\"\2/" "$KARGS_DIR/*.toml"
    else
        echo "kargs = [\"slab_nomerge=yes\"]" >> "$KARGS_DIR/10-slab_nomerge.toml"
    fi
else


    # Correct the form of default kernel command line in GRUB
    if grep -q '^\s*GRUB_CMDLINE_LINUX=.*slab_nomerge=.*"'  '/etc/default/grub' ; then
           # modify the GRUB command-line if an slab_nomerge= arg already exists
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)slab_nomerge=[^[:space:]]\+\(.*\"\)/\1slab_nomerge=yes\2/"  '/etc/default/grub'
    # Add to already existing GRUB_CMDLINE_LINUX parameters
    elif grep -q '^\s*GRUB_CMDLINE_LINUX='  '/etc/default/grub' ; then
           # no slab_nomerge=arg is present, append it
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)\"/\1 slab_nomerge=yes\"/"  '/etc/default/grub'
    # Add GRUB_CMDLINE_LINUX parameters line
    else
           echo "GRUB_CMDLINE_LINUX=\"slab_nomerge=yes\"" >> '/etc/default/grub'
    fi
    grubby --update-kernel=ALL --args=slab_nomerge=yes

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_grub2_slab_nomerge_argument'

###############################################################################
# BEGIN fix (66 / 229) for 'xccdf_org.ssgproject.content_rule_grub2_spec_store_bypass_disable_argument'
###############################################################################
(>&2 echo "Remediating rule 66/229: 'xccdf_org.ssgproject.content_rule_grub2_spec_store_bypass_disable_argument'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q grub2-common && rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

var_spec_store_bypass_disable_options='seccomp'



if { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    KARGS_DIR="/usr/lib/bootc/kargs.d/"
    if grep -q -E "spec_store_bypass_disable" "$KARGS_DIR/*.toml" ; then
        sed -i -E "s/^(\s*kargs\s*=\s*\[.*)\"spec_store_bypass_disable=[^\"]*\"(.*]\s*)/\1\"spec_store_bypass_disable=$var_spec_store_bypass_disable_options\"\2/" "$KARGS_DIR/*.toml"
    else
        echo "kargs = [\"spec_store_bypass_disable=$var_spec_store_bypass_disable_options\"]" >> "$KARGS_DIR/10-spec_store_bypass_disable.toml"
    fi
else


    # Correct the form of default kernel command line in GRUB
    if grep -q '^\s*GRUB_CMDLINE_LINUX=.*spec_store_bypass_disable=.*"'  '/etc/default/grub' ; then
           # modify the GRUB command-line if an spec_store_bypass_disable= arg already exists
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)spec_store_bypass_disable=[^[:space:]]\+\(.*\"\)/\1spec_store_bypass_disable=$var_spec_store_bypass_disable_options\2/"  '/etc/default/grub'
    # Add to already existing GRUB_CMDLINE_LINUX parameters
    elif grep -q '^\s*GRUB_CMDLINE_LINUX='  '/etc/default/grub' ; then
           # no spec_store_bypass_disable=arg is present, append it
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)\"/\1 spec_store_bypass_disable=$var_spec_store_bypass_disable_options\"/"  '/etc/default/grub'
    # Add GRUB_CMDLINE_LINUX parameters line
    else
           echo "GRUB_CMDLINE_LINUX=\"spec_store_bypass_disable=$var_spec_store_bypass_disable_options\"" >> '/etc/default/grub'
    fi
    grubby --update-kernel=ALL --args=spec_store_bypass_disable=$var_spec_store_bypass_disable_options

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_grub2_spec_store_bypass_disable_argument'

###############################################################################
# BEGIN fix (67 / 229) for 'xccdf_org.ssgproject.content_rule_grub2_spectre_v2_argument'
###############################################################################
(>&2 echo "Remediating rule 67/229: 'xccdf_org.ssgproject.content_rule_grub2_spectre_v2_argument'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q grub2-common && rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

if { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    KARGS_DIR="/usr/lib/bootc/kargs.d/"
    if grep -q -E "spectre_v2" "$KARGS_DIR/*.toml" ; then
        sed -i -E "s/^(\s*kargs\s*=\s*\[.*)\"spectre_v2=[^\"]*\"(.*]\s*)/\1\"spectre_v2=on\"\2/" "$KARGS_DIR/*.toml"
    else
        echo "kargs = [\"spectre_v2=on\"]" >> "$KARGS_DIR/10-spectre_v2.toml"
    fi
else


    # Correct the form of default kernel command line in GRUB
    if grep -q '^\s*GRUB_CMDLINE_LINUX=.*spectre_v2=.*"'  '/etc/default/grub' ; then
           # modify the GRUB command-line if an spectre_v2= arg already exists
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)spectre_v2=[^[:space:]]\+\(.*\"\)/\1spectre_v2=on\2/"  '/etc/default/grub'
    # Add to already existing GRUB_CMDLINE_LINUX parameters
    elif grep -q '^\s*GRUB_CMDLINE_LINUX='  '/etc/default/grub' ; then
           # no spectre_v2=arg is present, append it
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)\"/\1 spectre_v2=on\"/"  '/etc/default/grub'
    # Add GRUB_CMDLINE_LINUX parameters line
    else
           echo "GRUB_CMDLINE_LINUX=\"spectre_v2=on\"" >> '/etc/default/grub'
    fi
    grubby --update-kernel=ALL --args=spectre_v2=on

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_grub2_spectre_v2_argument'

###############################################################################
# BEGIN fix (68 / 229) for 'xccdf_org.ssgproject.content_rule_grub2_password'
###############################################################################
(>&2 echo "Remediating rule 68/229: 'xccdf_org.ssgproject.content_rule_grub2_password'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_grub2_password' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_grub2_password'

###############################################################################
# BEGIN fix (69 / 229) for 'xccdf_org.ssgproject.content_rule_grub2_uefi_password'
###############################################################################
(>&2 echo "Remediating rule 69/229: 'xccdf_org.ssgproject.content_rule_grub2_uefi_password'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_grub2_uefi_password' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_grub2_uefi_password'

###############################################################################
# BEGIN fix (70 / 229) for 'xccdf_org.ssgproject.content_rule_directory_groupowner_etc_ipsecd'
###############################################################################
(>&2 echo "Remediating rule 70/229: 'xccdf_org.ssgproject.content_rule_directory_groupowner_etc_ipsecd'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q libreswan; then

newgroup=""
if getent group "root" >/dev/null 2>&1; then
  newgroup="root"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "root is not a defined group on the system"
else
find -P /etc/ipsec.d/ -maxdepth 0 -type d  ! -group root -exec chgrp --no-dereference "$newgroup" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_directory_groupowner_etc_ipsecd'

###############################################################################
# BEGIN fix (71 / 229) for 'xccdf_org.ssgproject.content_rule_directory_owner_etc_ipsecd'
###############################################################################
(>&2 echo "Remediating rule 71/229: 'xccdf_org.ssgproject.content_rule_directory_owner_etc_ipsecd'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q libreswan; then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
find -P /etc/ipsec.d/ -maxdepth 0 -type d  ! -user 0 -exec chown --no-dereference "$newown" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_directory_owner_etc_ipsecd'

###############################################################################
# BEGIN fix (72 / 229) for 'xccdf_org.ssgproject.content_rule_directory_permissions_etc_ipsecd'
###############################################################################
(>&2 echo "Remediating rule 72/229: 'xccdf_org.ssgproject.content_rule_directory_permissions_etc_ipsecd'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q libreswan; then

find -H /etc/ipsec.d/ -maxdepth 0 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_directory_permissions_etc_ipsecd'

###############################################################################
# BEGIN fix (73 / 229) for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_ipsec_conf'
###############################################################################
(>&2 echo "Remediating rule 73/229: 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_ipsec_conf'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q libreswan; then

newgroup=""
if getent group "root" >/dev/null 2>&1; then
  newgroup="root"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "root is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/ipsec.conf" | grep -E -w -q "root"; then
    chgrp --no-dereference "$newgroup" /etc/ipsec.conf
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_ipsec_conf'

###############################################################################
# BEGIN fix (74 / 229) for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_ipsec_secrets'
###############################################################################
(>&2 echo "Remediating rule 74/229: 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_ipsec_secrets'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q libreswan; then

newgroup=""
if getent group "root" >/dev/null 2>&1; then
  newgroup="root"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "root is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/ipsec.secrets" | grep -E -w -q "root"; then
    chgrp --no-dereference "$newgroup" /etc/ipsec.secrets
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_ipsec_secrets'

###############################################################################
# BEGIN fix (75 / 229) for 'xccdf_org.ssgproject.content_rule_file_owner_etc_ipsec_conf'
###############################################################################
(>&2 echo "Remediating rule 75/229: 'xccdf_org.ssgproject.content_rule_file_owner_etc_ipsec_conf'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q libreswan; then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/ipsec.conf" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/ipsec.conf
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_owner_etc_ipsec_conf'

###############################################################################
# BEGIN fix (76 / 229) for 'xccdf_org.ssgproject.content_rule_file_owner_etc_ipsec_secrets'
###############################################################################
(>&2 echo "Remediating rule 76/229: 'xccdf_org.ssgproject.content_rule_file_owner_etc_ipsec_secrets'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q libreswan; then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/ipsec.secrets" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/ipsec.secrets
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_owner_etc_ipsec_secrets'

###############################################################################
# BEGIN fix (77 / 229) for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_ipsec_conf'
###############################################################################
(>&2 echo "Remediating rule 77/229: 'xccdf_org.ssgproject.content_rule_file_permissions_etc_ipsec_conf'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q libreswan; then

chmod u-xs,g-xws,o-xwt /etc/ipsec.conf

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_ipsec_conf'

###############################################################################
# BEGIN fix (78 / 229) for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_ipsec_secrets'
###############################################################################
(>&2 echo "Remediating rule 78/229: 'xccdf_org.ssgproject.content_rule_file_permissions_etc_ipsec_secrets'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q libreswan; then

chmod u-xs,g-xws,o-xwt /etc/ipsec.secrets

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_ipsec_secrets'

###############################################################################
# BEGIN fix (79 / 229) for 'xccdf_org.ssgproject.content_rule_directory_groupowner_etc_iptables'
###############################################################################
(>&2 echo "Remediating rule 79/229: 'xccdf_org.ssgproject.content_rule_directory_groupowner_etc_iptables'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q iptables; then

newgroup=""
if getent group "root" >/dev/null 2>&1; then
  newgroup="root"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "root is not a defined group on the system"
else
find -P /etc/iptables/ -maxdepth 0 -type d  ! -group root -exec chgrp --no-dereference "$newgroup" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_directory_groupowner_etc_iptables'

###############################################################################
# BEGIN fix (80 / 229) for 'xccdf_org.ssgproject.content_rule_directory_owner_etc_iptables'
###############################################################################
(>&2 echo "Remediating rule 80/229: 'xccdf_org.ssgproject.content_rule_directory_owner_etc_iptables'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q iptables; then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
find -P /etc/iptables/ -maxdepth 0 -type d  ! -user 0 -exec chown --no-dereference "$newown" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_directory_owner_etc_iptables'

###############################################################################
# BEGIN fix (81 / 229) for 'xccdf_org.ssgproject.content_rule_directory_permissions_etc_iptables'
###############################################################################
(>&2 echo "Remediating rule 81/229: 'xccdf_org.ssgproject.content_rule_directory_permissions_etc_iptables'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q iptables; then

find -H /etc/iptables/ -maxdepth 0 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_directory_permissions_etc_iptables'

###############################################################################
# BEGIN fix (82 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_ra_defrtr'
###############################################################################
(>&2 echo "Remediating rule 82/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_ra_defrtr'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.all.accept_ra_defrtr from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_ra_defrtr.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_ra_defrtr" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_accept_ra_defrtr_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_ra_defrtr
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.all.accept_ra_defrtr="$sysctl_net_ipv6_conf_all_accept_ra_defrtr_value"
fi

#
# If net.ipv6.conf.all.accept_ra_defrtr present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_ra_defrtr = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_ra_defrtr")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_ra_defrtr_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_ra_defrtr\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.accept_ra_defrtr\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_ra_defrtr'

###############################################################################
# BEGIN fix (83 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_ra_pinfo'
###############################################################################
(>&2 echo "Remediating rule 83/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_ra_pinfo'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.all.accept_ra_pinfo from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_ra_pinfo.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_ra_pinfo" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_accept_ra_pinfo_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_ra_pinfo
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.all.accept_ra_pinfo="$sysctl_net_ipv6_conf_all_accept_ra_pinfo_value"
fi

#
# If net.ipv6.conf.all.accept_ra_pinfo present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_ra_pinfo = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_ra_pinfo")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_ra_pinfo_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_ra_pinfo\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.accept_ra_pinfo\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_ra_pinfo'

###############################################################################
# BEGIN fix (84 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_ra_rtr_pref'
###############################################################################
(>&2 echo "Remediating rule 84/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_ra_rtr_pref'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.all.accept_ra_rtr_pref from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_ra_rtr_pref.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_ra_rtr_pref" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_accept_ra_rtr_pref_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_ra_rtr_pref
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.all.accept_ra_rtr_pref="$sysctl_net_ipv6_conf_all_accept_ra_rtr_pref_value"
fi

#
# If net.ipv6.conf.all.accept_ra_rtr_pref present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_ra_rtr_pref = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_ra_rtr_pref")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_ra_rtr_pref_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_ra_rtr_pref\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.accept_ra_rtr_pref\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_ra_rtr_pref'

###############################################################################
# BEGIN fix (85 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_redirects'
###############################################################################
(>&2 echo "Remediating rule 85/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_redirects'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.all.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_accept_redirects_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.all.accept_redirects="$sysctl_net_ipv6_conf_all_accept_redirects_value"
fi

#
# If net.ipv6.conf.all.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_redirects'

###############################################################################
# BEGIN fix (86 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_source_route'
###############################################################################
(>&2 echo "Remediating rule 86/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_source_route'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.all.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_source_route" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_accept_source_route_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_source_route
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.all.accept_source_route="$sysctl_net_ipv6_conf_all_accept_source_route_value"
fi

#
# If net.ipv6.conf.all.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_source_route'

###############################################################################
# BEGIN fix (87 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_autoconf'
###############################################################################
(>&2 echo "Remediating rule 87/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_autoconf'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.all.autoconf from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.autoconf.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.autoconf" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_autoconf_value='0'


#
# Set runtime for net.ipv6.conf.all.autoconf
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.all.autoconf="$sysctl_net_ipv6_conf_all_autoconf_value"
fi

#
# If net.ipv6.conf.all.autoconf present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.autoconf = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.autoconf")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_autoconf_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.autoconf\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.autoconf\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_autoconf'

###############################################################################
# BEGIN fix (88 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_max_addresses'
###############################################################################
(>&2 echo "Remediating rule 88/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_max_addresses'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.all.max_addresses from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.max_addresses.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.max_addresses" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_max_addresses_value='1'


#
# Set runtime for net.ipv6.conf.all.max_addresses
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.all.max_addresses="$sysctl_net_ipv6_conf_all_max_addresses_value"
fi

#
# If net.ipv6.conf.all.max_addresses present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.max_addresses = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.max_addresses")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_max_addresses_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.max_addresses\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.max_addresses\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_max_addresses'

###############################################################################
# BEGIN fix (89 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_router_solicitations'
###############################################################################
(>&2 echo "Remediating rule 89/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_router_solicitations'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.all.router_solicitations from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.router_solicitations.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.router_solicitations" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_router_solicitations_value='0'


#
# Set runtime for net.ipv6.conf.all.router_solicitations
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.all.router_solicitations="$sysctl_net_ipv6_conf_all_router_solicitations_value"
fi

#
# If net.ipv6.conf.all.router_solicitations present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.router_solicitations = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.router_solicitations")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_router_solicitations_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.router_solicitations\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.router_solicitations\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_router_solicitations'

###############################################################################
# BEGIN fix (90 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_ra_defrtr'
###############################################################################
(>&2 echo "Remediating rule 90/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_ra_defrtr'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.default.accept_ra_defrtr from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_ra_defrtr.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_ra_defrtr" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_accept_ra_defrtr_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_ra_defrtr
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.default.accept_ra_defrtr="$sysctl_net_ipv6_conf_default_accept_ra_defrtr_value"
fi

#
# If net.ipv6.conf.default.accept_ra_defrtr present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_ra_defrtr = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_ra_defrtr")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_ra_defrtr_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_ra_defrtr\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_ra_defrtr\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_ra_defrtr'

###############################################################################
# BEGIN fix (91 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_ra_pinfo'
###############################################################################
(>&2 echo "Remediating rule 91/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_ra_pinfo'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.default.accept_ra_pinfo from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_ra_pinfo.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_ra_pinfo" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_accept_ra_pinfo_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_ra_pinfo
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.default.accept_ra_pinfo="$sysctl_net_ipv6_conf_default_accept_ra_pinfo_value"
fi

#
# If net.ipv6.conf.default.accept_ra_pinfo present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_ra_pinfo = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_ra_pinfo")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_ra_pinfo_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_ra_pinfo\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_ra_pinfo\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_ra_pinfo'

###############################################################################
# BEGIN fix (92 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_ra_rtr_pref'
###############################################################################
(>&2 echo "Remediating rule 92/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_ra_rtr_pref'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.default.accept_ra_rtr_pref from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_ra_rtr_pref.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_ra_rtr_pref" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_accept_ra_rtr_pref_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_ra_rtr_pref
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.default.accept_ra_rtr_pref="$sysctl_net_ipv6_conf_default_accept_ra_rtr_pref_value"
fi

#
# If net.ipv6.conf.default.accept_ra_rtr_pref present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_ra_rtr_pref = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_ra_rtr_pref")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_ra_rtr_pref_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_ra_rtr_pref\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_ra_rtr_pref\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_ra_rtr_pref'

###############################################################################
# BEGIN fix (93 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_redirects'
###############################################################################
(>&2 echo "Remediating rule 93/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_redirects'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.default.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_accept_redirects_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.default.accept_redirects="$sysctl_net_ipv6_conf_default_accept_redirects_value"
fi

#
# If net.ipv6.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_redirects'

###############################################################################
# BEGIN fix (94 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_source_route'
###############################################################################
(>&2 echo "Remediating rule 94/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_source_route'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.default.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_source_route" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_accept_source_route_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_source_route
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.default.accept_source_route="$sysctl_net_ipv6_conf_default_accept_source_route_value"
fi

#
# If net.ipv6.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_source_route'

###############################################################################
# BEGIN fix (95 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_autoconf'
###############################################################################
(>&2 echo "Remediating rule 95/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_autoconf'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.default.autoconf from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.autoconf.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.autoconf" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_autoconf_value='0'


#
# Set runtime for net.ipv6.conf.default.autoconf
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.default.autoconf="$sysctl_net_ipv6_conf_default_autoconf_value"
fi

#
# If net.ipv6.conf.default.autoconf present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.autoconf = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.autoconf")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_autoconf_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.autoconf\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.autoconf\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_autoconf'

###############################################################################
# BEGIN fix (96 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_max_addresses'
###############################################################################
(>&2 echo "Remediating rule 96/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_max_addresses'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.default.max_addresses from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.max_addresses.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.max_addresses" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_max_addresses_value='1'


#
# Set runtime for net.ipv6.conf.default.max_addresses
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.default.max_addresses="$sysctl_net_ipv6_conf_default_max_addresses_value"
fi

#
# If net.ipv6.conf.default.max_addresses present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.max_addresses = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.max_addresses")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_max_addresses_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.max_addresses\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.max_addresses\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_max_addresses'

###############################################################################
# BEGIN fix (97 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_router_solicitations'
###############################################################################
(>&2 echo "Remediating rule 97/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_router_solicitations'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of net.ipv6.conf.default.router_solicitations from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.router_solicitations.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.router_solicitations" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_router_solicitations_value='0'


#
# Set runtime for net.ipv6.conf.default.router_solicitations
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv6.conf.default.router_solicitations="$sysctl_net_ipv6_conf_default_router_solicitations_value"
fi

#
# If net.ipv6.conf.default.router_solicitations present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.router_solicitations = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.router_solicitations")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_router_solicitations_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.router_solicitations\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.router_solicitations\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_router_solicitations'

###############################################################################
# BEGIN fix (98 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_local'
###############################################################################
(>&2 echo "Remediating rule 98/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_local'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.all.accept_local from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.accept_local.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.accept_local" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for net.ipv4.conf.all.accept_local
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.all.accept_local="0"
fi

#
# If net.ipv4.conf.all.accept_local present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.all.accept_local = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.accept_local")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.accept_local\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.accept_local\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_local'

###############################################################################
# BEGIN fix (99 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_redirects'
###############################################################################
(>&2 echo "Remediating rule 99/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_redirects'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.all.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.accept_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_accept_redirects_value='0'


#
# Set runtime for net.ipv4.conf.all.accept_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.all.accept_redirects="$sysctl_net_ipv4_conf_all_accept_redirects_value"
fi

#
# If net.ipv4.conf.all.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.accept_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_redirects'

###############################################################################
# BEGIN fix (100 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_source_route'
###############################################################################
(>&2 echo "Remediating rule 100/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_source_route'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.all.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.accept_source_route" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_accept_source_route_value='0'


#
# Set runtime for net.ipv4.conf.all.accept_source_route
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.all.accept_source_route="$sysctl_net_ipv4_conf_all_accept_source_route_value"
fi

#
# If net.ipv4.conf.all.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_source_route'

###############################################################################
# BEGIN fix (101 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_arp_filter'
###############################################################################
(>&2 echo "Remediating rule 101/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_arp_filter'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.all.arp_filter from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.arp_filter.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.arp_filter" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_arp_filter_value='0'


#
# Set runtime for net.ipv4.conf.all.arp_filter
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.all.arp_filter="$sysctl_net_ipv4_conf_all_arp_filter_value"
fi

#
# If net.ipv4.conf.all.arp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.arp_filter = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.arp_filter")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_arp_filter_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.arp_filter\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.arp_filter\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_arp_filter'

###############################################################################
# BEGIN fix (102 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_arp_ignore'
###############################################################################
(>&2 echo "Remediating rule 102/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_arp_ignore'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.all.arp_ignore from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.arp_ignore.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.arp_ignore" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_arp_ignore_value='2'


#
# Set runtime for net.ipv4.conf.all.arp_ignore
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.all.arp_ignore="$sysctl_net_ipv4_conf_all_arp_ignore_value"
fi

#
# If net.ipv4.conf.all.arp_ignore present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.arp_ignore = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.arp_ignore")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_arp_ignore_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.arp_ignore\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.arp_ignore\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_arp_ignore'

###############################################################################
# BEGIN fix (103 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_route_localnet'
###############################################################################
(>&2 echo "Remediating rule 103/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_route_localnet'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.all.route_localnet from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.route_localnet.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.route_localnet" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for net.ipv4.conf.all.route_localnet
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.all.route_localnet="0"
fi

#
# If net.ipv4.conf.all.route_localnet present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.all.route_localnet = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.route_localnet")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.route_localnet\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.route_localnet\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_route_localnet'

###############################################################################
# BEGIN fix (104 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_rp_filter'
###############################################################################
(>&2 echo "Remediating rule 104/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_rp_filter'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.all.rp_filter from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.rp_filter.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.rp_filter" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_rp_filter_value='1'


#
# Set runtime for net.ipv4.conf.all.rp_filter
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.all.rp_filter="$sysctl_net_ipv4_conf_all_rp_filter_value"
fi

#
# If net.ipv4.conf.all.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.rp_filter = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.rp_filter")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_rp_filter_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.rp_filter\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.rp_filter\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_rp_filter'

###############################################################################
# BEGIN fix (105 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_secure_redirects'
###############################################################################
(>&2 echo "Remediating rule 105/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_secure_redirects'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.all.secure_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.secure_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.secure_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_secure_redirects_value='0'


#
# Set runtime for net.ipv4.conf.all.secure_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.all.secure_redirects="$sysctl_net_ipv4_conf_all_secure_redirects_value"
fi

#
# If net.ipv4.conf.all.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.secure_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.secure_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_secure_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.secure_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.secure_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_secure_redirects'

###############################################################################
# BEGIN fix (106 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_shared_media'
###############################################################################
(>&2 echo "Remediating rule 106/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_shared_media'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.all.shared_media from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.shared_media.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.shared_media" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_shared_media_value='0'


#
# Set runtime for net.ipv4.conf.all.shared_media
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.all.shared_media="$sysctl_net_ipv4_conf_all_shared_media_value"
fi

#
# If net.ipv4.conf.all.shared_media present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.shared_media = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.shared_media")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_shared_media_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.shared_media\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.shared_media\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_shared_media'

###############################################################################
# BEGIN fix (107 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_redirects'
###############################################################################
(>&2 echo "Remediating rule 107/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_redirects'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.default.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.accept_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_accept_redirects_value='0'


#
# Set runtime for net.ipv4.conf.default.accept_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.default.accept_redirects="$sysctl_net_ipv4_conf_default_accept_redirects_value"
fi

#
# If net.ipv4.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_redirects'

###############################################################################
# BEGIN fix (108 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_source_route'
###############################################################################
(>&2 echo "Remediating rule 108/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_source_route'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.default.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.accept_source_route" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_accept_source_route_value='0'


#
# Set runtime for net.ipv4.conf.default.accept_source_route
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.default.accept_source_route="$sysctl_net_ipv4_conf_default_accept_source_route_value"
fi

#
# If net.ipv4.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_source_route'

###############################################################################
# BEGIN fix (109 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_rp_filter'
###############################################################################
(>&2 echo "Remediating rule 109/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_rp_filter'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.default.rp_filter from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.rp_filter.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.rp_filter" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_rp_filter_value='1'


#
# Set runtime for net.ipv4.conf.default.rp_filter
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.default.rp_filter="$sysctl_net_ipv4_conf_default_rp_filter_value"
fi

#
# If net.ipv4.conf.default.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.rp_filter = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.rp_filter")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_rp_filter_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.rp_filter\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.rp_filter\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_rp_filter'

###############################################################################
# BEGIN fix (110 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_secure_redirects'
###############################################################################
(>&2 echo "Remediating rule 110/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_secure_redirects'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.default.secure_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.secure_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.secure_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_secure_redirects_value='0'


#
# Set runtime for net.ipv4.conf.default.secure_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.default.secure_redirects="$sysctl_net_ipv4_conf_default_secure_redirects_value"
fi

#
# If net.ipv4.conf.default.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.secure_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.secure_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_secure_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.secure_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.secure_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_secure_redirects'

###############################################################################
# BEGIN fix (111 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_shared_media'
###############################################################################
(>&2 echo "Remediating rule 111/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_shared_media'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.default.shared_media from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.shared_media.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.shared_media" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_shared_media_value='0'


#
# Set runtime for net.ipv4.conf.default.shared_media
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.default.shared_media="$sysctl_net_ipv4_conf_default_shared_media_value"
fi

#
# If net.ipv4.conf.default.shared_media present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.shared_media = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.shared_media")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_shared_media_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.shared_media\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.shared_media\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_shared_media'

###############################################################################
# BEGIN fix (112 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_ignore_bogus_error_responses'
###############################################################################
(>&2 echo "Remediating rule 112/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_ignore_bogus_error_responses'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.icmp_ignore_bogus_error_responses from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.icmp_ignore_bogus_error_responses.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.icmp_ignore_bogus_error_responses" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value='1'


#
# Set runtime for net.ipv4.icmp_ignore_bogus_error_responses
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.icmp_ignore_bogus_error_responses="$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value"
fi

#
# If net.ipv4.icmp_ignore_bogus_error_responses present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_ignore_bogus_error_responses = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.icmp_ignore_bogus_error_responses")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.icmp_ignore_bogus_error_responses\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.icmp_ignore_bogus_error_responses\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_ignore_bogus_error_responses'

###############################################################################
# BEGIN fix (113 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_ip_local_port_range'
###############################################################################
(>&2 echo "Remediating rule 113/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_ip_local_port_range'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.ip_local_port_range from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.ip_local_port_range.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.ip_local_port_range" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for net.ipv4.ip_local_port_range
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.ip_local_port_range="32768 65535"
fi

#
# If net.ipv4.ip_local_port_range present in /etc/sysctl.conf, change value to "32768 65535"
#	else, add "net.ipv4.ip_local_port_range = 32768 65535" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.ip_local_port_range")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "32768 65535"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.ip_local_port_range\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.ip_local_port_range\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_ip_local_port_range'

###############################################################################
# BEGIN fix (114 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_rfc1337'
###############################################################################
(>&2 echo "Remediating rule 114/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_rfc1337'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.tcp_rfc1337 from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.tcp_rfc1337.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.tcp_rfc1337" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_tcp_rfc1337_value='1'


#
# Set runtime for net.ipv4.tcp_rfc1337
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.tcp_rfc1337="$sysctl_net_ipv4_tcp_rfc1337_value"
fi

#
# If net.ipv4.tcp_rfc1337 present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.tcp_rfc1337 = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.tcp_rfc1337")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_tcp_rfc1337_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.tcp_rfc1337\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.tcp_rfc1337\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_rfc1337'

###############################################################################
# BEGIN fix (115 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_syncookies'
###############################################################################
(>&2 echo "Remediating rule 115/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_syncookies'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.tcp_syncookies from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.tcp_syncookies.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.tcp_syncookies" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_tcp_syncookies_value='1'


#
# Set runtime for net.ipv4.tcp_syncookies
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.tcp_syncookies="$sysctl_net_ipv4_tcp_syncookies_value"
fi

#
# If net.ipv4.tcp_syncookies present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.tcp_syncookies = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.tcp_syncookies")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_tcp_syncookies_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.tcp_syncookies\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.tcp_syncookies\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_syncookies'

###############################################################################
# BEGIN fix (116 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_send_redirects'
###############################################################################
(>&2 echo "Remediating rule 116/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_send_redirects'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.all.send_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.send_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.send_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for net.ipv4.conf.all.send_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.all.send_redirects="0"
fi

#
# If net.ipv4.conf.all.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.all.send_redirects = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.send_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.send_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.send_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_send_redirects'

###############################################################################
# BEGIN fix (117 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_send_redirects'
###############################################################################
(>&2 echo "Remediating rule 117/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_send_redirects'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.conf.default.send_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.send_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.send_redirects" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for net.ipv4.conf.default.send_redirects
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.conf.default.send_redirects="0"
fi

#
# If net.ipv4.conf.default.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.default.send_redirects = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.send_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.send_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.send_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_send_redirects'

###############################################################################
# BEGIN fix (118 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_ip_forward'
###############################################################################
(>&2 echo "Remediating rule 118/229: 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_ip_forward'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of net.ipv4.ip_forward from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.ip_forward.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.ip_forward" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for net.ipv4.ip_forward
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w net.ipv4.ip_forward="0"
fi

#
# If net.ipv4.ip_forward present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.ip_forward = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.ip_forward")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.ip_forward\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.ip_forward\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_ip_forward'

###############################################################################
# BEGIN fix (119 / 229) for 'xccdf_org.ssgproject.content_rule_directory_groupowner_etc_nftables'
###############################################################################
(>&2 echo "Remediating rule 119/229: 'xccdf_org.ssgproject.content_rule_directory_groupowner_etc_nftables'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q nftables; then

newgroup=""
if getent group "root" >/dev/null 2>&1; then
  newgroup="root"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "root is not a defined group on the system"
else
find -P /etc/nftables/ -maxdepth 0 -type d  ! -group root -exec chgrp --no-dereference "$newgroup" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_directory_groupowner_etc_nftables'

###############################################################################
# BEGIN fix (120 / 229) for 'xccdf_org.ssgproject.content_rule_directory_owner_etc_nftables'
###############################################################################
(>&2 echo "Remediating rule 120/229: 'xccdf_org.ssgproject.content_rule_directory_owner_etc_nftables'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q nftables; then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
find -P /etc/nftables/ -maxdepth 0 -type d  ! -user 0 -exec chown --no-dereference "$newown" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_directory_owner_etc_nftables'

###############################################################################
# BEGIN fix (121 / 229) for 'xccdf_org.ssgproject.content_rule_directory_permissions_etc_nftables'
###############################################################################
(>&2 echo "Remediating rule 121/229: 'xccdf_org.ssgproject.content_rule_directory_permissions_etc_nftables'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q nftables; then

find -H /etc/nftables/ -maxdepth 0 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_directory_permissions_etc_nftables'

###############################################################################
# BEGIN fix (122 / 229) for 'xccdf_org.ssgproject.content_rule_dir_perms_world_writable_root_owned'
###############################################################################
(>&2 echo "Remediating rule 122/229: 'xccdf_org.ssgproject.content_rule_dir_perms_world_writable_root_owned'")

# At least under containerized env /proc can have files w/o possilibity to
# modify even as root. And touching /proc is not good idea anyways.
find / -path /proc -prune -o \
    -not -fstype afs -not -fstype autofs -not -fstype ceph -not -fstype cifs -not -fstype smb3 \
    -not -fstype smbfs -not -fstype sshfs -not -fstype ncpfs -not -fstype ncp -not -fstype nfs \
    -not -fstype nfs4 -not -fstype gfs -not -fstype gfs2 -not -fstype glusterfs -not -fstype gpfs \
    -not -fstype pvfs2 -not -fstype ocfs2 -not -fstype lustre -not -fstype davfs \
    -not -fstype fuse.sshfs -type d -perm -0002 -uid +0 -exec chown root {} \;

# END fix for 'xccdf_org.ssgproject.content_rule_dir_perms_world_writable_root_owned'

###############################################################################
# BEGIN fix (123 / 229) for 'xccdf_org.ssgproject.content_rule_dir_perms_world_writable_sticky_bits'
###############################################################################
(>&2 echo "Remediating rule 123/229: 'xccdf_org.ssgproject.content_rule_dir_perms_world_writable_sticky_bits'")
df --local -P | awk '{if (NR!=1) print $6}' \
| xargs -I '$6' find '$6' -xdev -type d \
\( -perm -0002 -a ! -perm -1000 \) 2>/dev/null \
-exec chmod a+t {} +

# END fix for 'xccdf_org.ssgproject.content_rule_dir_perms_world_writable_sticky_bits'

###############################################################################
# BEGIN fix (124 / 229) for 'xccdf_org.ssgproject.content_rule_dir_system_commands_group_root_owned'
###############################################################################
(>&2 echo "Remediating rule 124/229: 'xccdf_org.ssgproject.content_rule_dir_system_commands_group_root_owned'")


for SYSCMDDIRS in /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin
do
     find -L $SYSCMDDIRS ! -group root -type d -exec chgrp root '{}' \; 
done

# END fix for 'xccdf_org.ssgproject.content_rule_dir_system_commands_group_root_owned'

###############################################################################
# BEGIN fix (125 / 229) for 'xccdf_org.ssgproject.content_rule_dir_system_commands_root_owned'
###############################################################################
(>&2 echo "Remediating rule 125/229: 'xccdf_org.ssgproject.content_rule_dir_system_commands_root_owned'")

for SYSCMDDIRS in /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin
do
   find -L $SYSCMDDIRS \! -user root -type d -exec chown root {} \; 
done

# END fix for 'xccdf_org.ssgproject.content_rule_dir_system_commands_root_owned'

###############################################################################
# BEGIN fix (126 / 229) for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_crypttab'
###############################################################################
(>&2 echo "Remediating rule 126/229: 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_crypttab'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

newgroup=""
if getent group "root" >/dev/null 2>&1; then
  newgroup="root"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "root is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/crypttab" | grep -E -w -q "root"; then
    chgrp --no-dereference "$newgroup" /etc/crypttab
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_crypttab'

###############################################################################
# BEGIN fix (127 / 229) for 'xccdf_org.ssgproject.content_rule_file_owner_etc_crypttab'
###############################################################################
(>&2 echo "Remediating rule 127/229: 'xccdf_org.ssgproject.content_rule_file_owner_etc_crypttab'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/crypttab" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/crypttab
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_owner_etc_crypttab'

###############################################################################
# BEGIN fix (128 / 229) for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_crypttab'
###############################################################################
(>&2 echo "Remediating rule 128/229: 'xccdf_org.ssgproject.content_rule_file_permissions_etc_crypttab'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

chmod u-xs,g-xwrs,o-xwrt /etc/crypttab

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_crypttab'

###############################################################################
# BEGIN fix (129 / 229) for 'xccdf_org.ssgproject.content_rule_file_permissions_unauthorized_sgid'
###############################################################################
(>&2 echo "Remediating rule 129/229: 'xccdf_org.ssgproject.content_rule_file_permissions_unauthorized_sgid'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_file_permissions_unauthorized_sgid' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_unauthorized_sgid'

###############################################################################
# BEGIN fix (130 / 229) for 'xccdf_org.ssgproject.content_rule_file_permissions_unauthorized_suid'
###############################################################################
(>&2 echo "Remediating rule 130/229: 'xccdf_org.ssgproject.content_rule_file_permissions_unauthorized_suid'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_file_permissions_unauthorized_suid' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_unauthorized_suid'

###############################################################################
# BEGIN fix (131 / 229) for 'xccdf_org.ssgproject.content_rule_file_permissions_unauthorized_world_writable'
###############################################################################
(>&2 echo "Remediating rule 131/229: 'xccdf_org.ssgproject.content_rule_file_permissions_unauthorized_world_writable'")

FILTER_NODEV=$(awk '/nodev/ { print $2 }' /proc/filesystems | paste -sd,)

# Do not consider /sysroot partition because it contains only the physical
# read-only root on bootable containers.
PARTITIONS=$(findmnt -n -l -k -it $FILTER_NODEV | awk '{ print $1 }' | grep -v "/sysroot")

for PARTITION in $PARTITIONS; do
  find "${PARTITION}" -xdev -type f -perm -002 -exec chmod o-w {} \; 2>/dev/null
done

# Ensure /tmp is also fixed when tmpfs is used.
if grep "^tmpfs /tmp" /proc/mounts; then
  find /tmp -xdev -type f -perm -002 -exec chmod o-w {} \; 2>/dev/null
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_unauthorized_world_writable'

###############################################################################
# BEGIN fix (132 / 229) for 'xccdf_org.ssgproject.content_rule_file_permissions_ungroupowned'
###############################################################################
(>&2 echo "Remediating rule 132/229: 'xccdf_org.ssgproject.content_rule_file_permissions_ungroupowned'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_file_permissions_ungroupowned' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_ungroupowned'

###############################################################################
# BEGIN fix (133 / 229) for 'xccdf_org.ssgproject.content_rule_no_files_unowned_by_user'
###############################################################################
(>&2 echo "Remediating rule 133/229: 'xccdf_org.ssgproject.content_rule_no_files_unowned_by_user'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_no_files_unowned_by_user' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_no_files_unowned_by_user'

###############################################################################
# BEGIN fix (134 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_fs_protected_hardlinks'
###############################################################################
(>&2 echo "Remediating rule 134/229: 'xccdf_org.ssgproject.content_rule_sysctl_fs_protected_hardlinks'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of fs.protected_hardlinks from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*fs.protected_hardlinks.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "fs.protected_hardlinks" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for fs.protected_hardlinks
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w fs.protected_hardlinks="1"
fi

#
# If fs.protected_hardlinks present in /etc/sysctl.conf, change value to "1"
#	else, add "fs.protected_hardlinks = 1" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^fs.protected_hardlinks")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^fs.protected_hardlinks\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^fs.protected_hardlinks\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_fs_protected_hardlinks'

###############################################################################
# BEGIN fix (135 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_fs_protected_symlinks'
###############################################################################
(>&2 echo "Remediating rule 135/229: 'xccdf_org.ssgproject.content_rule_sysctl_fs_protected_symlinks'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of fs.protected_symlinks from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*fs.protected_symlinks.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "fs.protected_symlinks" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for fs.protected_symlinks
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w fs.protected_symlinks="1"
fi

#
# If fs.protected_symlinks present in /etc/sysctl.conf, change value to "1"
#	else, add "fs.protected_symlinks = 1" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^fs.protected_symlinks")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^fs.protected_symlinks\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^fs.protected_symlinks\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_fs_protected_symlinks'

###############################################################################
# BEGIN fix (136 / 229) for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_group'
###############################################################################
(>&2 echo "Remediating rule 136/229: 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_group'")

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/group" | grep -E -w -q "0"; then
    chgrp --no-dereference "$newgroup" /etc/group
fi

fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_group'

###############################################################################
# BEGIN fix (137 / 229) for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_gshadow'
###############################################################################
(>&2 echo "Remediating rule 137/229: 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_gshadow'")

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/gshadow" | grep -E -w -q "0"; then
    chgrp --no-dereference "$newgroup" /etc/gshadow
fi

fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_gshadow'

###############################################################################
# BEGIN fix (138 / 229) for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_passwd'
###############################################################################
(>&2 echo "Remediating rule 138/229: 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_passwd'")

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/passwd" | grep -E -w -q "0"; then
    chgrp --no-dereference "$newgroup" /etc/passwd
fi

fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_passwd'

###############################################################################
# BEGIN fix (139 / 229) for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_shadow'
###############################################################################
(>&2 echo "Remediating rule 139/229: 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_shadow'")

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/shadow" | grep -E -w -q "0"; then
    chgrp --no-dereference "$newgroup" /etc/shadow
fi

fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_shadow'

###############################################################################
# BEGIN fix (140 / 229) for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_shells'
###############################################################################
(>&2 echo "Remediating rule 140/229: 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_shells'")

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/shells" | grep -E -w -q "0"; then
    chgrp --no-dereference "$newgroup" /etc/shells
fi

fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_shells'

###############################################################################
# BEGIN fix (141 / 229) for 'xccdf_org.ssgproject.content_rule_file_owner_etc_group'
###############################################################################
(>&2 echo "Remediating rule 141/229: 'xccdf_org.ssgproject.content_rule_file_owner_etc_group'")

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/group" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/group
fi

fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_owner_etc_group'

###############################################################################
# BEGIN fix (142 / 229) for 'xccdf_org.ssgproject.content_rule_file_owner_etc_gshadow'
###############################################################################
(>&2 echo "Remediating rule 142/229: 'xccdf_org.ssgproject.content_rule_file_owner_etc_gshadow'")

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/gshadow" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/gshadow
fi

fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_owner_etc_gshadow'

###############################################################################
# BEGIN fix (143 / 229) for 'xccdf_org.ssgproject.content_rule_file_owner_etc_passwd'
###############################################################################
(>&2 echo "Remediating rule 143/229: 'xccdf_org.ssgproject.content_rule_file_owner_etc_passwd'")

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/passwd" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/passwd
fi

fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_owner_etc_passwd'

###############################################################################
# BEGIN fix (144 / 229) for 'xccdf_org.ssgproject.content_rule_file_owner_etc_shadow'
###############################################################################
(>&2 echo "Remediating rule 144/229: 'xccdf_org.ssgproject.content_rule_file_owner_etc_shadow'")

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/shadow" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/shadow
fi

fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_owner_etc_shadow'

###############################################################################
# BEGIN fix (145 / 229) for 'xccdf_org.ssgproject.content_rule_file_owner_etc_shells'
###############################################################################
(>&2 echo "Remediating rule 145/229: 'xccdf_org.ssgproject.content_rule_file_owner_etc_shells'")

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/shells" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/shells
fi

fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_owner_etc_shells'

###############################################################################
# BEGIN fix (146 / 229) for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_group'
###############################################################################
(>&2 echo "Remediating rule 146/229: 'xccdf_org.ssgproject.content_rule_file_permissions_etc_group'")




chmod u-xs,g-xws,o-xwt /etc/group

# END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_group'

###############################################################################
# BEGIN fix (147 / 229) for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_gshadow'
###############################################################################
(>&2 echo "Remediating rule 147/229: 'xccdf_org.ssgproject.content_rule_file_permissions_etc_gshadow'")




chmod u-xwrs,g-xwrs,o-xwrt /etc/gshadow

# END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_gshadow'

###############################################################################
# BEGIN fix (148 / 229) for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_passwd'
###############################################################################
(>&2 echo "Remediating rule 148/229: 'xccdf_org.ssgproject.content_rule_file_permissions_etc_passwd'")




chmod u-xs,g-xws,o-xwt /etc/passwd

# END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_passwd'

###############################################################################
# BEGIN fix (149 / 229) for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_shadow'
###############################################################################
(>&2 echo "Remediating rule 149/229: 'xccdf_org.ssgproject.content_rule_file_permissions_etc_shadow'")




chmod u-xwrs,g-xwrs,o-xwrt /etc/shadow

# END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_shadow'

###############################################################################
# BEGIN fix (150 / 229) for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_shells'
###############################################################################
(>&2 echo "Remediating rule 150/229: 'xccdf_org.ssgproject.content_rule_file_permissions_etc_shells'")




chmod u-xs,g-xws,o-xwt /etc/shells

# END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_shells'

###############################################################################
# BEGIN fix (151 / 229) for 'xccdf_org.ssgproject.content_rule_directory_groupowner_etc_sysctld'
###############################################################################
(>&2 echo "Remediating rule 151/229: 'xccdf_org.ssgproject.content_rule_directory_groupowner_etc_sysctld'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

newgroup=""
if getent group "root" >/dev/null 2>&1; then
  newgroup="root"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "root is not a defined group on the system"
else
find -P /etc/sysctl.d/ -maxdepth 0 -type d  ! -group root -exec chgrp --no-dereference "$newgroup" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_directory_groupowner_etc_sysctld'

###############################################################################
# BEGIN fix (152 / 229) for 'xccdf_org.ssgproject.content_rule_directory_owner_etc_sysctld'
###############################################################################
(>&2 echo "Remediating rule 152/229: 'xccdf_org.ssgproject.content_rule_directory_owner_etc_sysctld'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
find -P /etc/sysctl.d/ -maxdepth 0 -type d  ! -user 0 -exec chown --no-dereference "$newown" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_directory_owner_etc_sysctld'

###############################################################################
# BEGIN fix (153 / 229) for 'xccdf_org.ssgproject.content_rule_directory_permissions_etc_sysctld'
###############################################################################
(>&2 echo "Remediating rule 153/229: 'xccdf_org.ssgproject.content_rule_directory_permissions_etc_sysctld'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

find -H /etc/sysctl.d/ -maxdepth 0 -perm /u+s,g+ws,o+wt -type d -exec chmod u-s,g-ws,o-wt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_directory_permissions_etc_sysctld'

###############################################################################
# BEGIN fix (154 / 229) for 'xccdf_org.ssgproject.content_rule_file_groupownership_system_commands_dirs'
###############################################################################
(>&2 echo "Remediating rule 154/229: 'xccdf_org.ssgproject.content_rule_file_groupownership_system_commands_dirs'")

find -P /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin \! -group root -type f -exec chgrp root '{}' \; || true

# END fix for 'xccdf_org.ssgproject.content_rule_file_groupownership_system_commands_dirs'

###############################################################################
# BEGIN fix (155 / 229) for 'xccdf_org.ssgproject.content_rule_file_ownership_binary_dirs'
###############################################################################
(>&2 echo "Remediating rule 155/229: 'xccdf_org.ssgproject.content_rule_file_ownership_binary_dirs'")

find /bin/ /usr/bin/ /usr/local/bin/ /sbin/ /usr/sbin/ /usr/local/sbin/ /usr/libexec \! -user root -execdir chown root {} \;

# END fix for 'xccdf_org.ssgproject.content_rule_file_ownership_binary_dirs'

###############################################################################
# BEGIN fix (156 / 229) for 'xccdf_org.ssgproject.content_rule_file_permissions_binary_dirs'
###############################################################################
(>&2 echo "Remediating rule 156/229: 'xccdf_org.ssgproject.content_rule_file_permissions_binary_dirs'")
DIRS="/bin /usr/bin /usr/local/bin /sbin /usr/sbin /usr/local/sbin /usr/libexec"
for dirPath in $DIRS; do
	find "$dirPath" -perm /022 -exec chmod go-w '{}' \;
done

# END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_binary_dirs'

###############################################################################
# BEGIN fix (157 / 229) for 'xccdf_org.ssgproject.content_rule_mount_option_boot_noexec'
###############################################################################
(>&2 echo "Remediating rule 157/229: 'xccdf_org.ssgproject.content_rule_mount_option_boot_noexec'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ); then

function perform_remediation {

    
        # the mount point /boot has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/boot")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/boot' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /boot in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /boot)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|noexec)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /boot  defaults,${previous_mount_opts}noexec 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "noexec"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,noexec|" /etc/fstab
    fi


    if mkdir -p "/boot"; then
        if mountpoint -q "/boot"; then
            mount -o remount --target "/boot"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_boot_noexec'

###############################################################################
# BEGIN fix (158 / 229) for 'xccdf_org.ssgproject.content_rule_mount_option_boot_nosuid'
###############################################################################
(>&2 echo "Remediating rule 158/229: 'xccdf_org.ssgproject.content_rule_mount_option_boot_nosuid'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ); then

function perform_remediation {

    
        # the mount point /boot has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/boot")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/boot' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /boot in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /boot)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /boot  defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi


    if mkdir -p "/boot"; then
        if mountpoint -q "/boot"; then
            mount -o remount --target "/boot"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_boot_nosuid'

###############################################################################
# BEGIN fix (159 / 229) for 'xccdf_org.ssgproject.content_rule_mount_option_home_noexec'
###############################################################################
(>&2 echo "Remediating rule 159/229: 'xccdf_org.ssgproject.content_rule_mount_option_home_noexec'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ); then

function perform_remediation (){

    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" $1)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|noexec)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " $1  defaults,${previous_mount_opts}noexec 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "noexec"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,noexec|" /etc/fstab
    fi

    if mkdir -p "$1"; then
        if mountpoint -q "$1"; then
            mount -o remount --target "$1"
        fi
    fi
}

readarray -t home_directories  < \
    <(awk -F':' '{if ($3>=1000 && $3!= 65534) print $6}' /etc/passwd )


for home_directory in "${home_directories[@]}"
do
    if [ -d $home_directory ]; then
        fstab_mount_point=$(df $home_directory | awk '/^\/dev/ {print $6}')
        if  ! grep -qP "^/$|^/lib$|^/opt$|^/usr$|^/bin$|^/sbin$|^/boot$|^/dev$|^/proc$" <<< $fstab_mount_point
        then
            perform_remediation "$fstab_mount_point"
        fi
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_home_noexec'

###############################################################################
# BEGIN fix (160 / 229) for 'xccdf_org.ssgproject.content_rule_mount_option_home_nosuid'
###############################################################################
(>&2 echo "Remediating rule 160/229: 'xccdf_org.ssgproject.content_rule_mount_option_home_nosuid'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ); then

function perform_remediation (){

    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" $1)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " $1  defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi

    if mkdir -p "$1"; then
        if mountpoint -q "$1"; then
            mount -o remount --target "$1"
        fi
    fi
}

readarray -t home_directories  < \
    <(awk -F':' '{if ($3>=1000 && $3!= 65534) print $6}' /etc/passwd )


for home_directory in "${home_directories[@]}"
do
    if [ -d $home_directory ]; then
        fstab_mount_point=$(df $home_directory | awk '/^\/dev/ {print $6}')
        if  ! grep -qP "^/$|^/lib$|^/opt$|^/usr$|^/bin$|^/sbin$|^/boot$|^/dev$|^/proc$" <<< $fstab_mount_point
        then
            perform_remediation "$fstab_mount_point"
        fi
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_home_nosuid'

###############################################################################
# BEGIN fix (161 / 229) for 'xccdf_org.ssgproject.content_rule_mount_option_nodev_nonroot_local_partitions'
###############################################################################
(>&2 echo "Remediating rule 161/229: 'xccdf_org.ssgproject.content_rule_mount_option_nodev_nonroot_local_partitions'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ); then

MOUNT_OPTION="nodev"
# Create array of local non-root partitions
readarray -t partitions_records < <(findmnt --mtab --raw --evaluate | grep "^/\w" | grep -v "^/proc" | grep "\s/dev/\w")

# Create array of polyinstantiated directories, in case one of them is found in mtab
readarray -t polyinstantiated_dirs < \
    <(grep -oP "^\s*[^#\s]+\s+\S+" /etc/security/namespace.conf | grep -oP "(?<=\s)\S+?(?=/?\$)")

# Define excluded non-local file systems
excluded_fstypes=(
    afs
    autofs
    ceph
    cifs
    smb3
    smbfs
    sshfs
    ncpfs
    ncp
    nfs
    nfs4
    gfs
    gfs2
    glusterfs
    gpfs
    pvfs2
    ocfs2
    lustre
    davfs
    fuse.sshfs
    vfat
)

for partition_record in "${partitions_records[@]}"; do
    # Get all important information for fstab
    mount_point="$(echo "${partition_record}" | cut -d " " -f1)"
    device="$(echo "${partition_record}" | cut -d " " -f2)"
    device_type="$(echo "${partition_record}" | cut -d " " -f3)"

    # Skip /boot and /efi partitions
    if [[ "$mount_point" =~ ^/(boot|efi) ]]; then
        continue
    fi

    # Skip polyinstantiated directories
    if printf '%s\0' "${polyinstantiated_dirs[@]}" | grep -qxzF "$mount_point"; then
        continue
    fi

    # Skip any non-local filesystem
    for excluded_fstype in "${excluded_fstypes[@]}"; do
        if [[ "$device_type" == "$excluded_fstype" ]]; then
            # jump out of both loops and move to next partition_record
            continue 2
        fi
    done

    # If we reach here, it's a local, non-root partition that isn't excluded.
    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" $mount_point)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|$MOUNT_OPTION)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type="$device_type"
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo "$device $mount_point $device_type defaults,${previous_mount_opts}$MOUNT_OPTION 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "$MOUNT_OPTION"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,$MOUNT_OPTION|" /etc/fstab
    fi
    if mkdir -p "$mount_point"; then
        if mountpoint -q "$mount_point"; then
            mount -o remount --target "$mount_point"
        fi
    fi
done

# Remediate unmounted /etc/fstab entries, excluding /boot, /efi, and vfat partitions
sed -i -E '/nodev/! { /^\s*(\/dev\/\S+|UUID=\S+)\s+\/(boot|efi)/! { /^\s*(\/dev\/\S+|UUID=\S+)\s+\/\w\S*\s+vfat\s/! s;^\s*(/dev/\S+|UUID=\S+)\s+(/\w\S*)\s+(\S+)\s+(\S+)(.*)$;\1 \2 \3 \4,nodev \5; } }' /etc/fstab

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_nodev_nonroot_local_partitions'

###############################################################################
# BEGIN fix (162 / 229) for 'xccdf_org.ssgproject.content_rule_mount_option_opt_nosuid'
###############################################################################
(>&2 echo "Remediating rule 162/229: 'xccdf_org.ssgproject.content_rule_mount_option_opt_nosuid'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ) && { ( findmnt --kernel "/opt" > /dev/null || findmnt --fstab "/opt" > /dev/null ); }; then

function perform_remediation {

    
        # the mount point /opt has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/opt")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/opt' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /opt in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /opt)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /opt  defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi


    if mkdir -p "/opt"; then
        if mountpoint -q "/opt"; then
            mount -o remount --target "/opt"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_opt_nosuid'

###############################################################################
# BEGIN fix (163 / 229) for 'xccdf_org.ssgproject.content_rule_mount_option_srv_nosuid'
###############################################################################
(>&2 echo "Remediating rule 163/229: 'xccdf_org.ssgproject.content_rule_mount_option_srv_nosuid'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ) && { ( findmnt --kernel "/srv" > /dev/null || findmnt --fstab "/srv" > /dev/null ); }; then

function perform_remediation {

    
        # the mount point /srv has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/srv")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/srv' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /srv in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /srv)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /srv  defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi


    if mkdir -p "/srv"; then
        if mountpoint -q "/srv"; then
            mount -o remount --target "/srv"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_srv_nosuid'

###############################################################################
# BEGIN fix (164 / 229) for 'xccdf_org.ssgproject.content_rule_mount_option_tmp_noexec'
###############################################################################
(>&2 echo "Remediating rule 164/229: 'xccdf_org.ssgproject.content_rule_mount_option_tmp_noexec'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ) && { ( findmnt --kernel "/tmp" > /dev/null || findmnt --fstab "/tmp" > /dev/null ); }; then

function perform_remediation {

    
        # the mount point /tmp has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|noexec)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /tmp  defaults,${previous_mount_opts}noexec 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "noexec"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,noexec|" /etc/fstab
    fi


    if mkdir -p "/tmp"; then
        if mountpoint -q "/tmp"; then
            mount -o remount --target "/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_tmp_noexec'

###############################################################################
# BEGIN fix (165 / 229) for 'xccdf_org.ssgproject.content_rule_mount_option_tmp_nosuid'
###############################################################################
(>&2 echo "Remediating rule 165/229: 'xccdf_org.ssgproject.content_rule_mount_option_tmp_nosuid'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ) && { ( findmnt --kernel "/tmp" > /dev/null || findmnt --fstab "/tmp" > /dev/null ); }; then

function perform_remediation {

    
        # the mount point /tmp has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /tmp  defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi


    if mkdir -p "/tmp"; then
        if mountpoint -q "/tmp"; then
            mount -o remount --target "/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_tmp_nosuid'

###############################################################################
# BEGIN fix (166 / 229) for 'xccdf_org.ssgproject.content_rule_mount_option_var_log_noexec'
###############################################################################
(>&2 echo "Remediating rule 166/229: 'xccdf_org.ssgproject.content_rule_mount_option_var_log_noexec'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ) && { ( findmnt --kernel "/var/log" > /dev/null || findmnt --fstab "/var/log" > /dev/null ); }; then

function perform_remediation {

    
        # the mount point /var/log has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/var/log")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/var/log' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /var/log in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /var/log)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|noexec)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /var/log  defaults,${previous_mount_opts}noexec 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "noexec"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,noexec|" /etc/fstab
    fi


    if mkdir -p "/var/log"; then
        if mountpoint -q "/var/log"; then
            mount -o remount --target "/var/log"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_var_log_noexec'

###############################################################################
# BEGIN fix (167 / 229) for 'xccdf_org.ssgproject.content_rule_mount_option_var_log_nosuid'
###############################################################################
(>&2 echo "Remediating rule 167/229: 'xccdf_org.ssgproject.content_rule_mount_option_var_log_nosuid'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ) && { ( findmnt --kernel "/var/log" > /dev/null || findmnt --fstab "/var/log" > /dev/null ); }; then

function perform_remediation {

    
        # the mount point /var/log has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/var/log")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/var/log' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /var/log in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /var/log)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /var/log  defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi


    if mkdir -p "/var/log"; then
        if mountpoint -q "/var/log"; then
            mount -o remount --target "/var/log"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_var_log_nosuid'

###############################################################################
# BEGIN fix (168 / 229) for 'xccdf_org.ssgproject.content_rule_mount_option_var_noexec'
###############################################################################
(>&2 echo "Remediating rule 168/229: 'xccdf_org.ssgproject.content_rule_mount_option_var_noexec'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ) && { ( findmnt --kernel "/var" > /dev/null || findmnt --fstab "/var" > /dev/null ); }; then

function perform_remediation {

    
        # the mount point /var has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/var")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/var' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /var in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /var)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|noexec)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /var  defaults,${previous_mount_opts}noexec 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "noexec"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,noexec|" /etc/fstab
    fi


    if mkdir -p "/var"; then
        if mountpoint -q "/var"; then
            mount -o remount --target "/var"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_var_noexec'

###############################################################################
# BEGIN fix (169 / 229) for 'xccdf_org.ssgproject.content_rule_mount_option_var_nosuid'
###############################################################################
(>&2 echo "Remediating rule 169/229: 'xccdf_org.ssgproject.content_rule_mount_option_var_nosuid'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ) && { ( findmnt --kernel "/var" > /dev/null || findmnt --fstab "/var" > /dev/null ); }; then

function perform_remediation {

    
        # the mount point /var has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/var")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/var' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /var in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /var)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /var  defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi


    if mkdir -p "/var"; then
        if mountpoint -q "/var"; then
            mount -o remount --target "/var"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_var_nosuid'

###############################################################################
# BEGIN fix (170 / 229) for 'xccdf_org.ssgproject.content_rule_mount_option_var_tmp_noexec'
###############################################################################
(>&2 echo "Remediating rule 170/229: 'xccdf_org.ssgproject.content_rule_mount_option_var_tmp_noexec'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ) && { ( findmnt --kernel "/var/tmp" > /dev/null || findmnt --fstab "/var/tmp" > /dev/null ); }; then

function perform_remediation {

    
        # the mount point /var/tmp has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/var/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/var/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /var/tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /var/tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|noexec)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /var/tmp  defaults,${previous_mount_opts}noexec 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "noexec"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,noexec|" /etc/fstab
    fi


    if mkdir -p "/var/tmp"; then
        if mountpoint -q "/var/tmp"; then
            mount -o remount --target "/var/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_var_tmp_noexec'

###############################################################################
# BEGIN fix (171 / 229) for 'xccdf_org.ssgproject.content_rule_mount_option_var_tmp_nosuid'
###############################################################################
(>&2 echo "Remediating rule 171/229: 'xccdf_org.ssgproject.content_rule_mount_option_var_tmp_nosuid'")
# Remediation is applicable only in certain platforms
if ( ! ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) ) && ! ( [ -f /.dockerenv ] || [ -f /run/.containerenv ] ) ) && { ( findmnt --kernel "/var/tmp" > /dev/null || findmnt --fstab "/var/tmp" > /dev/null ); }; then

function perform_remediation {

    
        # the mount point /var/tmp has to be defined in /etc/fstab
        # before this remediation can be executed. In case it is not defined, the
        # remediation aborts and no changes regarding the mount point are done.
        mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" "/var/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/var/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /var/tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "^[[:space:]]*[^#].*[[:space:]]%s[[:space:]]" /var/tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep -q "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /var/tmp  defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep -q "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi


    if mkdir -p "/var/tmp"; then
        if mountpoint -q "/var/tmp"; then
            mount -o remount --target "/var/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_mount_option_var_tmp_nosuid'

###############################################################################
# BEGIN fix (172 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_dmesg_restrict'
###############################################################################
(>&2 echo "Remediating rule 172/229: 'xccdf_org.ssgproject.content_rule_sysctl_kernel_dmesg_restrict'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of kernel.dmesg_restrict from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.dmesg_restrict.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.dmesg_restrict" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.dmesg_restrict
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w kernel.dmesg_restrict="1"
fi

#
# If kernel.dmesg_restrict present in /etc/sysctl.conf, change value to "1"
#	else, add "kernel.dmesg_restrict = 1" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.dmesg_restrict")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.dmesg_restrict\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.dmesg_restrict\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_dmesg_restrict'

###############################################################################
# BEGIN fix (173 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_panic_on_oops'
###############################################################################
(>&2 echo "Remediating rule 173/229: 'xccdf_org.ssgproject.content_rule_sysctl_kernel_panic_on_oops'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of kernel.panic_on_oops from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.panic_on_oops.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.panic_on_oops" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.panic_on_oops
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w kernel.panic_on_oops="1"
fi

#
# If kernel.panic_on_oops present in /etc/sysctl.conf, change value to "1"
#	else, add "kernel.panic_on_oops = 1" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.panic_on_oops")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.panic_on_oops\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.panic_on_oops\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_panic_on_oops'

###############################################################################
# BEGIN fix (174 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_perf_cpu_time_max_percent'
###############################################################################
(>&2 echo "Remediating rule 174/229: 'xccdf_org.ssgproject.content_rule_sysctl_kernel_perf_cpu_time_max_percent'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of kernel.perf_cpu_time_max_percent from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.perf_cpu_time_max_percent.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.perf_cpu_time_max_percent" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.perf_cpu_time_max_percent
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w kernel.perf_cpu_time_max_percent="1"
fi

#
# If kernel.perf_cpu_time_max_percent present in /etc/sysctl.conf, change value to "1"
#	else, add "kernel.perf_cpu_time_max_percent = 1" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.perf_cpu_time_max_percent")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.perf_cpu_time_max_percent\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.perf_cpu_time_max_percent\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_perf_cpu_time_max_percent'

###############################################################################
# BEGIN fix (175 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_perf_event_max_sample_rate'
###############################################################################
(>&2 echo "Remediating rule 175/229: 'xccdf_org.ssgproject.content_rule_sysctl_kernel_perf_event_max_sample_rate'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of kernel.perf_event_max_sample_rate from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.perf_event_max_sample_rate.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.perf_event_max_sample_rate" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.perf_event_max_sample_rate
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w kernel.perf_event_max_sample_rate="1"
fi

#
# If kernel.perf_event_max_sample_rate present in /etc/sysctl.conf, change value to "1"
#	else, add "kernel.perf_event_max_sample_rate = 1" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.perf_event_max_sample_rate")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.perf_event_max_sample_rate\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.perf_event_max_sample_rate\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_perf_event_max_sample_rate'

###############################################################################
# BEGIN fix (176 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_perf_event_paranoid'
###############################################################################
(>&2 echo "Remediating rule 176/229: 'xccdf_org.ssgproject.content_rule_sysctl_kernel_perf_event_paranoid'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of kernel.perf_event_paranoid from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.perf_event_paranoid.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.perf_event_paranoid" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.perf_event_paranoid
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w kernel.perf_event_paranoid="2"
fi

#
# If kernel.perf_event_paranoid present in /etc/sysctl.conf, change value to "2"
#	else, add "kernel.perf_event_paranoid = 2" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.perf_event_paranoid")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "2"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.perf_event_paranoid\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.perf_event_paranoid\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_perf_event_paranoid'

###############################################################################
# BEGIN fix (177 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_pid_max'
###############################################################################
(>&2 echo "Remediating rule 177/229: 'xccdf_org.ssgproject.content_rule_sysctl_kernel_pid_max'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of kernel.pid_max from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.pid_max.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.pid_max" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.pid_max
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w kernel.pid_max="65536"
fi

#
# If kernel.pid_max present in /etc/sysctl.conf, change value to "65536"
#	else, add "kernel.pid_max = 65536" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.pid_max")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "65536"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.pid_max\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.pid_max\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_pid_max'

###############################################################################
# BEGIN fix (178 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_sysrq'
###############################################################################
(>&2 echo "Remediating rule 178/229: 'xccdf_org.ssgproject.content_rule_sysctl_kernel_sysrq'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of kernel.sysrq from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.sysrq.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.sysrq" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.sysrq
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w kernel.sysrq="0"
fi

#
# If kernel.sysrq present in /etc/sysctl.conf, change value to "0"
#	else, add "kernel.sysrq = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.sysrq")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.sysrq\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.sysrq\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_sysrq'

###############################################################################
# BEGIN fix (179 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_yama_ptrace_scope'
###############################################################################
(>&2 echo "Remediating rule 179/229: 'xccdf_org.ssgproject.content_rule_sysctl_kernel_yama_ptrace_scope'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of kernel.yama.ptrace_scope from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.yama.ptrace_scope.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.yama.ptrace_scope" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.yama.ptrace_scope
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w kernel.yama.ptrace_scope="1"
fi

#
# If kernel.yama.ptrace_scope present in /etc/sysctl.conf, change value to "1"
#	else, add "kernel.yama.ptrace_scope = 1" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.yama.ptrace_scope")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.yama.ptrace_scope\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.yama.ptrace_scope\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_yama_ptrace_scope'

###############################################################################
# BEGIN fix (180 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_vm_mmap_min_addr'
###############################################################################
(>&2 echo "Remediating rule 180/229: 'xccdf_org.ssgproject.content_rule_sysctl_vm_mmap_min_addr'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of vm.mmap_min_addr from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*vm.mmap_min_addr.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "vm.mmap_min_addr" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for vm.mmap_min_addr
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w vm.mmap_min_addr="65536"
fi

#
# If vm.mmap_min_addr present in /etc/sysctl.conf, change value to "65536"
#	else, add "vm.mmap_min_addr = 65536" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^vm.mmap_min_addr")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "65536"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^vm.mmap_min_addr\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^vm.mmap_min_addr\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_vm_mmap_min_addr'

###############################################################################
# BEGIN fix (181 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_fs_suid_dumpable'
###############################################################################
(>&2 echo "Remediating rule 181/229: 'xccdf_org.ssgproject.content_rule_sysctl_fs_suid_dumpable'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Comment out any occurrences of fs.suid_dumpable from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*fs.suid_dumpable.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "fs.suid_dumpable" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for fs.suid_dumpable
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w fs.suid_dumpable="0"
fi

#
# If fs.suid_dumpable present in /etc/sysctl.conf, change value to "0"
#	else, add "fs.suid_dumpable = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^fs.suid_dumpable")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^fs.suid_dumpable\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^fs.suid_dumpable\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_fs_suid_dumpable'

###############################################################################
# BEGIN fix (182 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_kptr_restrict'
###############################################################################
(>&2 echo "Remediating rule 182/229: 'xccdf_org.ssgproject.content_rule_sysctl_kernel_kptr_restrict'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of kernel.kptr_restrict from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.kptr_restrict.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.kptr_restrict" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_kernel_kptr_restrict_value='2'


#
# Set runtime for kernel.kptr_restrict
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w kernel.kptr_restrict="$sysctl_kernel_kptr_restrict_value"
fi

#
# If kernel.kptr_restrict present in /etc/sysctl.conf, change value to appropriate value
#	else, add "kernel.kptr_restrict = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.kptr_restrict")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_kernel_kptr_restrict_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.kptr_restrict\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.kptr_restrict\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_kptr_restrict'

###############################################################################
# BEGIN fix (183 / 229) for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_randomize_va_space'
###############################################################################
(>&2 echo "Remediating rule 183/229: 'xccdf_org.ssgproject.content_rule_sysctl_kernel_randomize_va_space'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

# Comment out any occurrences of kernel.randomize_va_space from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do


  # skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
  if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.randomize_va_space.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.randomize_va_space" matches to preserve user data
      sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.randomize_va_space
#
if ! { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    /sbin/sysctl -q -n -w kernel.randomize_va_space="2"
fi

#
# If kernel.randomize_va_space present in /etc/sysctl.conf, change value to "2"
#	else, add "kernel.randomize_va_space = 2" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.randomize_va_space")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "2"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.randomize_va_space\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.randomize_va_space\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sysctl_kernel_randomize_va_space'

###############################################################################
# BEGIN fix (184 / 229) for 'xccdf_org.ssgproject.content_rule_grub2_page_poison_argument'
###############################################################################
(>&2 echo "Remediating rule 184/229: 'xccdf_org.ssgproject.content_rule_grub2_page_poison_argument'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q grub2-common; }; then

if { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    KARGS_DIR="/usr/lib/bootc/kargs.d/"
    if grep -q -E "page_poison" "$KARGS_DIR/*.toml" ; then
        sed -i -E "s/^(\s*kargs\s*=\s*\[.*)\"page_poison=[^\"]*\"(.*]\s*)/\1\"page_poison=1\"\2/" "$KARGS_DIR/*.toml"
    else
        echo "kargs = [\"page_poison=1\"]" >> "$KARGS_DIR/10-page_poison.toml"
    fi
else


    # Correct the form of default kernel command line in GRUB
    if grep -q '^\s*GRUB_CMDLINE_LINUX=.*page_poison=.*"'  '/etc/default/grub' ; then
           # modify the GRUB command-line if an page_poison= arg already exists
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)page_poison=[^[:space:]]\+\(.*\"\)/\1page_poison=1\2/"  '/etc/default/grub'
    # Add to already existing GRUB_CMDLINE_LINUX parameters
    elif grep -q '^\s*GRUB_CMDLINE_LINUX='  '/etc/default/grub' ; then
           # no page_poison=arg is present, append it
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)\"/\1 page_poison=1\"/"  '/etc/default/grub'
    # Add GRUB_CMDLINE_LINUX parameters line
    else
           echo "GRUB_CMDLINE_LINUX=\"page_poison=1\"" >> '/etc/default/grub'
    fi
    grubby --update-kernel=ALL --args=page_poison=1

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_grub2_page_poison_argument'

###############################################################################
# BEGIN fix (185 / 229) for 'xccdf_org.ssgproject.content_rule_grub2_slub_debug_argument'
###############################################################################
(>&2 echo "Remediating rule 185/229: 'xccdf_org.ssgproject.content_rule_grub2_slub_debug_argument'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q grub2-common; }; then

var_slub_debug_options='FZP'



if { rpm --quiet -q kernel rpm-ostree bootc && ! rpm --quiet -q openshift-kubelet && { [ -f "/run/.containerenv" ] || [ -f "/.containerenv" ]; }; } ; then
    KARGS_DIR="/usr/lib/bootc/kargs.d/"
    if grep -q -E "slub_debug" "$KARGS_DIR/*.toml" ; then
        sed -i -E "s/^(\s*kargs\s*=\s*\[.*)\"slub_debug=[^\"]*\"(.*]\s*)/\1\"slub_debug=$var_slub_debug_options\"\2/" "$KARGS_DIR/*.toml"
    else
        echo "kargs = [\"slub_debug=$var_slub_debug_options\"]" >> "$KARGS_DIR/10-slub_debug.toml"
    fi
else


    # Correct the form of default kernel command line in GRUB
    if grep -q '^\s*GRUB_CMDLINE_LINUX=.*slub_debug=.*"'  '/etc/default/grub' ; then
           # modify the GRUB command-line if an slub_debug= arg already exists
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)slub_debug=[^[:space:]]\+\(.*\"\)/\1slub_debug=$var_slub_debug_options\2/"  '/etc/default/grub'
    # Add to already existing GRUB_CMDLINE_LINUX parameters
    elif grep -q '^\s*GRUB_CMDLINE_LINUX='  '/etc/default/grub' ; then
           # no slub_debug=arg is present, append it
           sed -i "s/\(^\s*GRUB_CMDLINE_LINUX=\".*\)\"/\1 slub_debug=$var_slub_debug_options\"/"  '/etc/default/grub'
    # Add GRUB_CMDLINE_LINUX parameters line
    else
           echo "GRUB_CMDLINE_LINUX=\"slub_debug=$var_slub_debug_options\"" >> '/etc/default/grub'
    fi
    grubby --update-kernel=ALL --args=slub_debug=$var_slub_debug_options

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_grub2_slub_debug_argument'

###############################################################################
# BEGIN fix (186 / 229) for 'xccdf_org.ssgproject.content_rule_directory_groupowner_etc_selinux'
###############################################################################
(>&2 echo "Remediating rule 186/229: 'xccdf_org.ssgproject.content_rule_directory_groupowner_etc_selinux'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

newgroup=""
if getent group "root" >/dev/null 2>&1; then
  newgroup="root"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "root is not a defined group on the system"
else
find -P /etc/selinux/ -maxdepth 0 -type d  ! -group root -exec chgrp --no-dereference "$newgroup" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_directory_groupowner_etc_selinux'

###############################################################################
# BEGIN fix (187 / 229) for 'xccdf_org.ssgproject.content_rule_directory_owner_etc_selinux'
###############################################################################
(>&2 echo "Remediating rule 187/229: 'xccdf_org.ssgproject.content_rule_directory_owner_etc_selinux'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
find -P /etc/selinux/ -maxdepth 0 -type d  ! -user 0 -exec chown --no-dereference "$newown" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_directory_owner_etc_selinux'

###############################################################################
# BEGIN fix (188 / 229) for 'xccdf_org.ssgproject.content_rule_directory_permissions_etc_selinux'
###############################################################################
(>&2 echo "Remediating rule 188/229: 'xccdf_org.ssgproject.content_rule_directory_permissions_etc_selinux'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

find -H /etc/selinux/ -maxdepth 0 -perm /u+s,g+ws,o+wt -type d -exec chmod u-s,g-ws,o-wt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_directory_permissions_etc_selinux'

###############################################################################
# BEGIN fix (189 / 229) for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_sestatus_conf'
###############################################################################
(>&2 echo "Remediating rule 189/229: 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_sestatus_conf'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

newgroup=""
if getent group "root" >/dev/null 2>&1; then
  newgroup="root"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "root is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/sestatus.conf" | grep -E -w -q "root"; then
    chgrp --no-dereference "$newgroup" /etc/sestatus.conf
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_sestatus_conf'

###############################################################################
# BEGIN fix (190 / 229) for 'xccdf_org.ssgproject.content_rule_file_owner_etc_sestatus_conf'
###############################################################################
(>&2 echo "Remediating rule 190/229: 'xccdf_org.ssgproject.content_rule_file_owner_etc_sestatus_conf'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/sestatus.conf" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/sestatus.conf
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_owner_etc_sestatus_conf'

###############################################################################
# BEGIN fix (191 / 229) for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_sestatus_conf'
###############################################################################
(>&2 echo "Remediating rule 191/229: 'xccdf_org.ssgproject.content_rule_file_permissions_etc_sestatus_conf'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

chmod u-xs,g-xws,o-xwt /etc/sestatus.conf

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_sestatus_conf'

###############################################################################
# BEGIN fix (192 / 229) for 'xccdf_org.ssgproject.content_rule_selinux_state'
###############################################################################
(>&2 echo "Remediating rule 192/229: 'xccdf_org.ssgproject.content_rule_selinux_state'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

var_selinux_state='enforcing'


if [ -e "/etc/selinux/config" ] ; then
    
    LC_ALL=C sed -i "/^SELINUX=/Id" "/etc/selinux/config"
else
    touch "/etc/selinux/config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/selinux/config"

cp "/etc/selinux/config" "/etc/selinux/config.bak"
# Insert at the end of the file
printf '%s\n' "SELINUX=$var_selinux_state" >> "/etc/selinux/config"
# Clean up after ourselves.
rm "/etc/selinux/config.bak"

fixfiles onboot

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_selinux_state'

###############################################################################
# BEGIN fix (193 / 229) for 'xccdf_org.ssgproject.content_rule_sebool_polyinstantiation_enabled'
###############################################################################
(>&2 echo "Remediating rule 193/229: 'xccdf_org.ssgproject.content_rule_sebool_polyinstantiation_enabled'")
# Remediation is applicable only in certain platforms
if ( { rpm --quiet -q kernel ;} && { rpm --quiet -q rpm-ostree ;} && { rpm --quiet -q bootc ;} && { ! rpm --quiet -q openshift-kubelet ;} && ([ -f /run/ostree-booted ] || [ -L /ostree ]) || [ "${container:-}" == "bwrap-osbuild" ] || selinuxenabled ) && rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if ! rpm -q --quiet "libsemanage-python" ; then
    yum install -y "libsemanage-python"
fi


# Workaround for https://github.com/OpenSCAP/openscap/issues/2242: Use full
# path to setsebool command to avoid the issue with the command not being
# found.

    var_polyinstantiation_enabled='true'

    /usr/sbin/setsebool -P polyinstantiation_enabled $var_polyinstantiation_enabled

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sebool_polyinstantiation_enabled'

###############################################################################
# BEGIN fix (194 / 229) for 'xccdf_org.ssgproject.content_rule_package_dhcp_removed'
###############################################################################
(>&2 echo "Remediating rule 194/229: 'xccdf_org.ssgproject.content_rule_package_dhcp_removed'")

# CAUTION: This remediation script will remove dhcp
# from the system, and may remove any packages
# that depend on dhcp. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "dhcp" ; then
yum remove -y "dhcp"
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_dhcp_removed'

###############################################################################
# BEGIN fix (195 / 229) for 'xccdf_org.ssgproject.content_rule_package_sendmail_removed'
###############################################################################
(>&2 echo "Remediating rule 195/229: 'xccdf_org.ssgproject.content_rule_package_sendmail_removed'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# CAUTION: This remediation script will remove sendmail
# from the system, and may remove any packages
# that depend on sendmail. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "sendmail" ; then
yum remove -y "sendmail"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_sendmail_removed'

###############################################################################
# BEGIN fix (196 / 229) for 'xccdf_org.ssgproject.content_rule_postfix_client_configure_mail_alias'
###############################################################################
(>&2 echo "Remediating rule 196/229: 'xccdf_org.ssgproject.content_rule_postfix_client_configure_mail_alias'")
(>&2 echo "FIX FOR THIS RULE 'xccdf_org.ssgproject.content_rule_postfix_client_configure_mail_alias' IS MISSING!")

# END fix for 'xccdf_org.ssgproject.content_rule_postfix_client_configure_mail_alias'

###############################################################################
# BEGIN fix (197 / 229) for 'xccdf_org.ssgproject.content_rule_postfix_network_listening_disabled'
###############################################################################
(>&2 echo "Remediating rule 197/229: 'xccdf_org.ssgproject.content_rule_postfix_network_listening_disabled'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q postfix; }; then

var_postfix_inet_interfaces='loopback-only'


if [ -e "/etc/postfix/main.cf" ] ; then
    
    LC_ALL=C sed -i "/^\s*inet_interfaces\s\+=\s\+/Id" "/etc/postfix/main.cf"
else
    touch "/etc/postfix/main.cf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/postfix/main.cf"

cp "/etc/postfix/main.cf" "/etc/postfix/main.cf.bak"
# Insert at the end of the file
printf '%s\n' "inet_interfaces=$var_postfix_inet_interfaces" >> "/etc/postfix/main.cf"
# Clean up after ourselves.
rm "/etc/postfix/main.cf.bak"

systemctl restart postfix

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_postfix_network_listening_disabled'

###############################################################################
# BEGIN fix (198 / 229) for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_chrony_keys'
###############################################################################
(>&2 echo "Remediating rule 198/229: 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_chrony_keys'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

newgroup=""
if getent group "chrony" >/dev/null 2>&1; then
  newgroup="chrony"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "chrony is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/chrony.keys" | grep -E -w -q "chrony"; then
    chgrp --no-dereference "$newgroup" /etc/chrony.keys
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_etc_chrony_keys'

###############################################################################
# BEGIN fix (199 / 229) for 'xccdf_org.ssgproject.content_rule_file_owner_etc_chrony_keys'
###############################################################################
(>&2 echo "Remediating rule 199/229: 'xccdf_org.ssgproject.content_rule_file_owner_etc_chrony_keys'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/chrony.keys" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/chrony.keys
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_owner_etc_chrony_keys'

###############################################################################
# BEGIN fix (200 / 229) for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_chrony_keys'
###############################################################################
(>&2 echo "Remediating rule 200/229: 'xccdf_org.ssgproject.content_rule_file_permissions_etc_chrony_keys'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

chmod u-xs,g-xws,o-xwrt /etc/chrony.keys

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_etc_chrony_keys'

###############################################################################
# BEGIN fix (201 / 229) for 'xccdf_org.ssgproject.content_rule_package_xinetd_removed'
###############################################################################
(>&2 echo "Remediating rule 201/229: 'xccdf_org.ssgproject.content_rule_package_xinetd_removed'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# CAUTION: This remediation script will remove xinetd
# from the system, and may remove any packages
# that depend on xinetd. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "xinetd" ; then
yum remove -y "xinetd"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_xinetd_removed'

###############################################################################
# BEGIN fix (202 / 229) for 'xccdf_org.ssgproject.content_rule_package_ypbind_removed'
###############################################################################
(>&2 echo "Remediating rule 202/229: 'xccdf_org.ssgproject.content_rule_package_ypbind_removed'")

# CAUTION: This remediation script will remove ypbind
# from the system, and may remove any packages
# that depend on ypbind. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "ypbind" ; then
yum remove -y "ypbind"
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_ypbind_removed'

###############################################################################
# BEGIN fix (203 / 229) for 'xccdf_org.ssgproject.content_rule_package_ypserv_removed'
###############################################################################
(>&2 echo "Remediating rule 203/229: 'xccdf_org.ssgproject.content_rule_package_ypserv_removed'")

# CAUTION: This remediation script will remove ypserv
# from the system, and may remove any packages
# that depend on ypserv. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "ypserv" ; then
yum remove -y "ypserv"
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_ypserv_removed'

###############################################################################
# BEGIN fix (204 / 229) for 'xccdf_org.ssgproject.content_rule_package_rsh-server_removed'
###############################################################################
(>&2 echo "Remediating rule 204/229: 'xccdf_org.ssgproject.content_rule_package_rsh-server_removed'")

# CAUTION: This remediation script will remove rsh-server
# from the system, and may remove any packages
# that depend on rsh-server. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "rsh-server" ; then
yum remove -y "rsh-server"
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_rsh-server_removed'

###############################################################################
# BEGIN fix (205 / 229) for 'xccdf_org.ssgproject.content_rule_package_rsh_removed'
###############################################################################
(>&2 echo "Remediating rule 205/229: 'xccdf_org.ssgproject.content_rule_package_rsh_removed'")

# CAUTION: This remediation script will remove rsh
# from the system, and may remove any packages
# that depend on rsh. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "rsh" ; then
yum remove -y "rsh"
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_rsh_removed'

###############################################################################
# BEGIN fix (206 / 229) for 'xccdf_org.ssgproject.content_rule_package_talk-server_removed'
###############################################################################
(>&2 echo "Remediating rule 206/229: 'xccdf_org.ssgproject.content_rule_package_talk-server_removed'")

# CAUTION: This remediation script will remove talk-server
# from the system, and may remove any packages
# that depend on talk-server. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "talk-server" ; then
yum remove -y "talk-server"
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_talk-server_removed'

###############################################################################
# BEGIN fix (207 / 229) for 'xccdf_org.ssgproject.content_rule_package_talk_removed'
###############################################################################
(>&2 echo "Remediating rule 207/229: 'xccdf_org.ssgproject.content_rule_package_talk_removed'")

# CAUTION: This remediation script will remove talk
# from the system, and may remove any packages
# that depend on talk. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "talk" ; then
yum remove -y "talk"
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_talk_removed'

###############################################################################
# BEGIN fix (208 / 229) for 'xccdf_org.ssgproject.content_rule_package_telnet-server_removed'
###############################################################################
(>&2 echo "Remediating rule 208/229: 'xccdf_org.ssgproject.content_rule_package_telnet-server_removed'")

# CAUTION: This remediation script will remove telnet-server
# from the system, and may remove any packages
# that depend on telnet-server. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "telnet-server" ; then
yum remove -y "telnet-server"
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_telnet-server_removed'

###############################################################################
# BEGIN fix (209 / 229) for 'xccdf_org.ssgproject.content_rule_package_telnet_removed'
###############################################################################
(>&2 echo "Remediating rule 209/229: 'xccdf_org.ssgproject.content_rule_package_telnet_removed'")

# CAUTION: This remediation script will remove telnet
# from the system, and may remove any packages
# that depend on telnet. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "telnet" ; then
yum remove -y "telnet"
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_telnet_removed'

###############################################################################
# BEGIN fix (210 / 229) for 'xccdf_org.ssgproject.content_rule_package_tftp-server_removed'
###############################################################################
(>&2 echo "Remediating rule 210/229: 'xccdf_org.ssgproject.content_rule_package_tftp-server_removed'")

# CAUTION: This remediation script will remove tftp-server
# from the system, and may remove any packages
# that depend on tftp-server. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "tftp-server" ; then
yum remove -y "tftp-server"
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_tftp-server_removed'

###############################################################################
# BEGIN fix (211 / 229) for 'xccdf_org.ssgproject.content_rule_package_tftp_removed'
###############################################################################
(>&2 echo "Remediating rule 211/229: 'xccdf_org.ssgproject.content_rule_package_tftp_removed'")

# CAUTION: This remediation script will remove tftp
# from the system, and may remove any packages
# that depend on tftp. Execute this
# remediation AFTER testing on a non-production
# system!


if rpm -q --quiet "tftp" ; then
yum remove -y "tftp"
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_tftp_removed'

###############################################################################
# BEGIN fix (212 / 229) for 'xccdf_org.ssgproject.content_rule_file_groupowner_sshd_config'
###############################################################################
(>&2 echo "Remediating rule 212/229: 'xccdf_org.ssgproject.content_rule_file_groupowner_sshd_config'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
if ! stat -c "%g %G" "/etc/ssh/sshd_config" | grep -E -w -q "0"; then
    chgrp --no-dereference "$newgroup" /etc/ssh/sshd_config
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_groupowner_sshd_config'

###############################################################################
# BEGIN fix (213 / 229) for 'xccdf_org.ssgproject.content_rule_file_groupownership_sshd_private_key'
###############################################################################
(>&2 echo "Remediating rule 213/229: 'xccdf_org.ssgproject.content_rule_file_groupownership_sshd_private_key'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

newgroup=""
if getent group "ssh_keys" >/dev/null 2>&1; then
  newgroup="ssh_keys"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "ssh_keys is not a defined group on the system"
else
find -P /etc/ssh/ -maxdepth 1 -type f  ! -group ssh_keys -regextype posix-extended -regex '^.*_key$' -exec chgrp --no-dereference "$newgroup" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_groupownership_sshd_private_key'

###############################################################################
# BEGIN fix (214 / 229) for 'xccdf_org.ssgproject.content_rule_file_groupownership_sshd_pub_key'
###############################################################################
(>&2 echo "Remediating rule 214/229: 'xccdf_org.ssgproject.content_rule_file_groupownership_sshd_pub_key'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

newgroup=""
if getent group "0" >/dev/null 2>&1; then
  newgroup="0"
fi

if [[ -z "${newgroup}" ]]; then
  >&2 echo "0 is not a defined group on the system"
else
find -P /etc/ssh/ -maxdepth 1 -type f  ! -group 0 -regextype posix-extended -regex '^.*\.pub$' -exec chgrp --no-dereference "$newgroup" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_groupownership_sshd_pub_key'

###############################################################################
# BEGIN fix (215 / 229) for 'xccdf_org.ssgproject.content_rule_file_owner_sshd_config'
###############################################################################
(>&2 echo "Remediating rule 215/229: 'xccdf_org.ssgproject.content_rule_file_owner_sshd_config'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else
if ! stat -c "%u %U" "/etc/ssh/sshd_config" | grep -E -w -q "0"; then
    chown --no-dereference "$newown" /etc/ssh/sshd_config
fi

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_owner_sshd_config'

###############################################################################
# BEGIN fix (216 / 229) for 'xccdf_org.ssgproject.content_rule_file_ownership_sshd_private_key'
###############################################################################
(>&2 echo "Remediating rule 216/229: 'xccdf_org.ssgproject.content_rule_file_ownership_sshd_private_key'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else

find -P /etc/ssh/ -maxdepth 1 -type f  ! -user 0 -regextype posix-extended -regex '^.*_key$' -exec chown --no-dereference "$newown" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_ownership_sshd_private_key'

###############################################################################
# BEGIN fix (217 / 229) for 'xccdf_org.ssgproject.content_rule_file_ownership_sshd_pub_key'
###############################################################################
(>&2 echo "Remediating rule 217/229: 'xccdf_org.ssgproject.content_rule_file_ownership_sshd_pub_key'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

newown=""
if id "0" >/dev/null 2>&1; then
  newown="0"
fi

if [[ -z "$newown" ]]; then
  >&2 echo "0 is not a defined user on the system"
else

find -P /etc/ssh/ -maxdepth 1 -type f  ! -user 0 -regextype posix-extended -regex '^.*\.pub$' -exec chown --no-dereference "$newown" {} \;

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_ownership_sshd_pub_key'

###############################################################################
# BEGIN fix (218 / 229) for 'xccdf_org.ssgproject.content_rule_file_permissions_sshd_config'
###############################################################################
(>&2 echo "Remediating rule 218/229: 'xccdf_org.ssgproject.content_rule_file_permissions_sshd_config'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

chmod u-xs,g-xwrs,o-xwrt /etc/ssh/sshd_config

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_sshd_config'

###############################################################################
# BEGIN fix (219 / 229) for 'xccdf_org.ssgproject.content_rule_file_permissions_sshd_private_key'
###############################################################################
(>&2 echo "Remediating rule 219/229: 'xccdf_org.ssgproject.content_rule_file_permissions_sshd_private_key'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

for keyfile in /etc/ssh/*_key; do
    test -f "$keyfile" || continue
    if test root:root = "$(stat -c "%U:%G" "$keyfile")"; then
    
	chmod u-xs,g-xwrs,o-xwrt "$keyfile"
    
    elif test root:ssh_keys = "$(stat -c "%U:%G" "$keyfile")"; then
	chmod u-xs,g-xws,o-xwrt "$keyfile"
    else
        echo "Key-like file '$keyfile' is owned by an unexpected user:group combination"
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_sshd_private_key'

###############################################################################
# BEGIN fix (220 / 229) for 'xccdf_org.ssgproject.content_rule_file_permissions_sshd_pub_key'
###############################################################################
(>&2 echo "Remediating rule 220/229: 'xccdf_org.ssgproject.content_rule_file_permissions_sshd_pub_key'")
# Remediation is applicable only in certain platforms
if ( rpm --quiet -q kernel || rpm --quiet -q kernel-uek ); then

find -P /etc/ssh/ -maxdepth 1 -perm /u+xs,g+xws,o+xwt  -type f -regextype posix-extended -regex '^.*\.pub$' -exec chmod u-xs,g-xws,o-xwt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_file_permissions_sshd_pub_key'

###############################################################################
# BEGIN fix (221 / 229) for 'xccdf_org.ssgproject.content_rule_sshd_disable_root_login'
###############################################################################
(>&2 echo "Remediating rule 221/229: 'xccdf_org.ssgproject.content_rule_sshd_disable_root_login'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*PermitRootLogin\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert at the beginning of the file
printf '%s\n' "PermitRootLogin no" > "/etc/ssh/sshd_config"
cat "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sshd_disable_root_login'

###############################################################################
# BEGIN fix (222 / 229) for 'xccdf_org.ssgproject.content_rule_package_sssd_installed'
###############################################################################
(>&2 echo "Remediating rule 222/229: 'xccdf_org.ssgproject.content_rule_package_sssd_installed'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q sssd-common; then

if ! rpm -q --quiet "sssd" ; then
    yum install -y "sssd"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_sssd_installed'

###############################################################################
# BEGIN fix (223 / 229) for 'xccdf_org.ssgproject.content_rule_service_sssd_enabled'
###############################################################################
(>&2 echo "Remediating rule 223/229: 'xccdf_org.ssgproject.content_rule_service_sssd_enabled'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q sssd-common && { ( ( rpm --quiet -q sssd-common && rpm --quiet -q kernel || rpm --quiet -q kernel-uek ) ); }; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'sssd.service'
if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
  "$SYSTEMCTL_EXEC" start 'sssd.service'
fi
"$SYSTEMCTL_EXEC" enable 'sssd.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_service_sssd_enabled'

###############################################################################
# BEGIN fix (224 / 229) for 'xccdf_org.ssgproject.content_rule_sssd_enable_pam_services'
###############################################################################
(>&2 echo "Remediating rule 224/229: 'xccdf_org.ssgproject.content_rule_sssd_enable_pam_services'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q sssd-common; then

# sssd configuration files must be created with 600 permissions if they don't exist
# otherwise the sssd module fails to start
OLD_UMASK=$(umask)
umask u=rw,go=

SSSD_CONF="/etc/sssd/sssd.conf"
SSSD_CONF_DIR="/etc/sssd/conf.d/*.conf"

if [ ! -f "$SSSD_CONF" ] && [ ! -f "$SSSD_CONF_DIR" ]; then
    mkdir -p /etc/sssd
    touch "$SSSD_CONF"
fi

# Flag to check if there is already services with pam
service_already_exist=false
for f in $SSSD_CONF $SSSD_CONF_DIR; do
	if [ ! -e "$f" ]; then
		continue
	fi
	# finds all services entries under [sssd] configuration category, get a unique list so it doesn't add redundant fix
	services_list=$( awk '/^\s*\[/{f=0} /^\s*\[sssd\]/{f=1}f' $f | grep -P '^services[ \t]*=' | uniq )
    if [ -z "$services_list" ]; then
        continue
    fi

	while IFS= read -r services; do
		if [[ ! $services =~ "pam" ]]; then
			sed -i "s/$services$/&, pam/" $f
		fi
        # Either pam service was already there or got added now
        service_already_exist=true
	done <<< "$services_list"

done

# If there was no service in [sssd], add it to first config
if [ "$service_already_exist" = false ]; then
    for f in $SSSD_CONF $SSSD_CONF_DIR; do
        cat << EOF >> "$f"
[sssd]
services = pam
EOF
        break
    done
fi

umask $OLD_UMASK

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sssd_enable_pam_services'

###############################################################################
# BEGIN fix (225 / 229) for 'xccdf_org.ssgproject.content_rule_sssd_ldap_configure_tls_reqcert'
###############################################################################
(>&2 echo "Remediating rule 225/229: 'xccdf_org.ssgproject.content_rule_sssd_ldap_configure_tls_reqcert'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && rpm --quiet -q sssd-common; then

SSSD_CONF="/etc/sssd/sssd.conf"
LDAP_REGEX='[[:space:]]*\[domain\/[^]]*]([^(\n)]*(\n)+)+?[[:space:]]*ldap_tls_reqcert'
AD_REGEX='[[:space:]]*\[domain\/[^]]*]([^(\n)]*(\n)+)+?[[:space:]]*id_provider[[:space:]]*=[[:space:]]*((?i)ad)[[:space:]]*$'
DOMAIN_REGEX="[[:space:]]*\[domain\/[^]]*]"

# Check if id_provider is not set to ad (Active Directory) which makes start_tls not applicable, note the -v option to invert the grep.
# Try to find [domain/..] and ldap_tls_reqcert in sssd.conf, if it exists, set to 'demand'
# if ldap_tls_reqcert isn't here, add it
# if [domain/..] doesn't exist, add it here for default domain
if grep -qvzosP $AD_REGEX $SSSD_CONF; then
        if grep -qzosP $LDAP_REGEX $SSSD_CONF; then
                
                sed -i "s#ldap_tls_reqcert[^(\n)]*#ldap_tls_reqcert = demand#" $SSSD_CONF
        elif grep -qs $DOMAIN_REGEX $SSSD_CONF; then
                sed -i "/$DOMAIN_REGEX/a ldap_tls_reqcert = demand" $SSSD_CONF
        else
                if test -f "$SSSD_CONF"; then
                        echo -e "[domain/default]\nldap_tls_reqcert = demand" >> $SSSD_CONF
                else
                        echo "Config file '$SSSD_CONF' doesnt exist, not remediating, assuming non-applicability." >&2
                fi
        fi
fi

readarray -t SSSD_CONF_D_FILES < <(find /etc/sssd/conf.d/ -name "*.conf")
for SSSD_CONF_D_FILE in "${SSSD_CONF_D_FILES[@]}"; do
    sed -i "s#ldap_tls_reqcert[^(\n)]*#ldap_tls_reqcert = demand#" "$SSSD_CONF_D_FILE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sssd_ldap_configure_tls_reqcert'

###############################################################################
# BEGIN fix (226 / 229) for 'xccdf_org.ssgproject.content_rule_sssd_ldap_start_tls'
###############################################################################
(>&2 echo "Remediating rule 226/229: 'xccdf_org.ssgproject.content_rule_sssd_ldap_start_tls'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && rpm --quiet -q sssd-common; then

SSSD_CONF="/etc/sssd/sssd.conf"
LDAP_REGEX='[[:space:]]*\[domain\/[^]]*]([^(\n)]*(\n)+)+?[[:space:]]*ldap_id_use_start_tls'
AD_REGEX='[[:space:]]*\[domain\/[^]]*]([^(\n)]*(\n)+)+?[[:space:]]*id_provider[[:space:]]*=[[:space:]]*((?i)ad)[[:space:]]*$'
DOMAIN_REGEX="[[:space:]]*\[domain\/[^]]*]"

# Check if id_provider is not set to ad (Active Directory) which makes start_tls not applicable, note the -v option to invert the grep.
# Try to find [domain/..] and ldap_id_use_start_tls in sssd.conf, if it exists, set to 'true'
# if ldap_id_use_start_tls isn't here, add it
# if [domain/..] doesn't exist, add it here for default domain
if grep -qvzosP $AD_REGEX $SSSD_CONF; then
        if grep -qzosP $LDAP_REGEX $SSSD_CONF; then
                
                sed -i "s#ldap_id_use_start_tls[^(\n)]*#ldap_id_use_start_tls = true#" $SSSD_CONF
        elif grep -qs $DOMAIN_REGEX $SSSD_CONF; then
                sed -i "/$DOMAIN_REGEX/a ldap_id_use_start_tls = true" $SSSD_CONF
        else
                if test -f "$SSSD_CONF"; then
                        echo -e "[domain/default]\nldap_id_use_start_tls = true" >> $SSSD_CONF
                else
                        echo "Config file '$SSSD_CONF' doesnt exist, not remediating, assuming non-applicability." >&2
                fi
        fi
fi

readarray -t SSSD_CONF_D_FILES < <(find /etc/sssd/conf.d/ -name "*.conf")
for SSSD_CONF_D_FILE in "${SSSD_CONF_D_FILES[@]}"; do
    sed -i "s#ldap_id_use_start_tls[^(\n)]*#ldap_id_use_start_tls = true#" "$SSSD_CONF_D_FILE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_sssd_ldap_start_tls'

###############################################################################
# BEGIN fix (227 / 229) for 'xccdf_org.ssgproject.content_rule_package_audit_installed'
###############################################################################
(>&2 echo "Remediating rule 227/229: 'xccdf_org.ssgproject.content_rule_package_audit_installed'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

if ! rpm -q --quiet "audit" ; then
    yum install -y "audit"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_package_audit_installed'

###############################################################################
# BEGIN fix (228 / 229) for 'xccdf_org.ssgproject.content_rule_service_auditd_enabled'
###############################################################################
(>&2 echo "Remediating rule 228/229: 'xccdf_org.ssgproject.content_rule_service_auditd_enabled'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q kernel || rpm --quiet -q kernel-uek && { rpm --quiet -q audit; }; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'auditd.service'
if [[ $("$SYSTEMCTL_EXEC" is-system-running) != "offline" ]]; then
  "$SYSTEMCTL_EXEC" start 'auditd.service'
fi
"$SYSTEMCTL_EXEC" enable 'auditd.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_service_auditd_enabled'

###############################################################################
# BEGIN fix (229 / 229) for 'xccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_sudo'
###############################################################################
(>&2 echo "Remediating rule 229/229: 'xccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_sudo'")
# Remediation is applicable only in certain platforms
if rpm --quiet -q audit && rpm --quiet -q kernel || rpm --quiet -q kernel-uek; then

# Retrieve hardware architecture of the underlying system
OTHER_FILTERS="-F path=/usr/bin/sudo -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""


ACTION_ARCH_FILTERS="-a always,exit"
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()

# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0600 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod 0600 ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

# END fix for 'xccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_sudo'